Marine Plumbing & Ventilation

1-1/2" NPT Bronze In-Line Ball ValveFeatures: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves 400 WOG rated Full flow C83600 bronze construction Stainless steel handle and hardware Chrome plated solid brass ball (not a hollow ball) PTFE seats and seals Bonding attachment UL listed for fuel or water Fits IBVF for Seacock Application Specifications: Construction: Bronze Box Dimensions: 3"H x 6"W x 8"L WT: 3.5 lbs UPC: 742985141872

Read more less

Thermostatic Mixing Valve Kit for Nautic Boiler B3A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The Quick thermostatic mixing valve is suited perfectly for the Quick and Sigmar brand of water heaters. This kit is sold complete with the valve, hose , and fittings.For use with Quick Nautic Boiler B3.

Read more less

1200W Heating Element for B3 & Sigmar Heaters - 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod Specifications: Type: Parts Box Dimensions: 2"H x 2"W x 12"L WT: 0.9 lbs UPC: 8057090079593

Read more less

Garboard Drain Plus with Steel WrenchComplete with Zinc Plated Steel Wrench. Specifications: Cast Bronze Flange Brass Plug Complete with Zinc Plated Steel Wrench Flange Outer Diameter: 3-1/8" Pipe Size: 1" Length: 1" Threaded Screw Size: #10

Read more less

Quad Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market! Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every last drop of water from your bilge. Combined with our newest innovative product, EVACUATOR+, your cabin will be odor-free and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of:           The world’s ONLY Smart Device enabled Dry Bilge System on the market with customized operation. An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step.” Use BILGE-B-DRY after washdown, when there is heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical) An environmentally friendly low-profile bilge water pickup design with a proprietary filter system Configured to automatically cycle (5) five times per day for (2) two minutes if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options: Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown. Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes.  This is a great option if you will be away from your boat for a few weeks.  Example:With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled.  If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.  BILGE-B-DRY is available in four 12vdc pump configurations:  (24vdc requests by special order, excluding Quad pump configuration) Single pump (1 motor/diaphragm pump - 12 feet of tubing provided) Dual pump (2 motors/diaphragm pumps - 12 feet of tubing for pickup, 6 feet for discharge provided) Triple pump (3 motors/diaphragm pumps - 18 feet of tubing for pickup, 6 feet for discharge provided) Quad pump (4 motors/diaphragm pumps - 24 feet of tubing for pickup, 6 feet for discharge provided)   Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:12VDC (available in 24vdc special order only, excluding Quad pump)Pump: Working voltage: 8-13vdc Maximum flow: 0.3 - GPM Current: less than 500mA Pump head: 10 feet Pump suction: 5 (vertical) feet Diaphram design, able to run dry for extended periods without damage Life expectancy >1000 hours Control board: Wireless Connectivity Static current: 20mA Working current: 50mA Working voltage: 12vdc [10-14V] Life expectancy: 100,000 cycles Working temperature: - 40 85 °C Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in): Enclosure:  3.0 H x 5.0 W x 5.0 L Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L  Dimensions (mm): Enclosure: 76 H x 128 W x 128 L Rectangular Pickup: 50 H x 60 W x 100 L Included with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold seperately) with an integrated filter helps reduce harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which unlike other dry bilge systems, eliminates the need for a secondary filter.  For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when flow rate has decreased.  BILGE-B-DRY orders DO NOT INCLUDE the stainless holddown bracket!

Read more less

Triple Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market! Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every last drop of water from your bilge. Combined with our newest innovative product, EVACUATOR+, your cabin will be odor-free and your bilge will be the driest and cleanest at the marina! Why choose BILGE-B-DRY? Take advantage of:           The world’s ONLY Smart Device enabled Dry Bilge System on the market with customized operation. An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step.” Use BILGE-B-DRY after washdown, when there is heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical) An environmentally friendly low-profile bilge water pickup design with a proprietary filter system Configured to automatically cycle (5) five times per day for (2) two minutes if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options: Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown. Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes.  This is a great option if you will be away from your boat for a few weeks.  Example:With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled.  If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.  BILGE-B-DRY is available in four 12vdc pump configurations:  (24vdc requests by special order, excluding Quad pump configuration) Single pump (1 motor/diaphragm pump - 12 feet of tubing provided) Dual pump (2 motors/diaphragm pumps - 12 feet of tubing for pickup, 6 feet for discharge provided) Triple pump (3 motors/diaphragm pumps - 18 feet of tubing for pickup, 6 feet for discharge provided) Quad pump (4 motors/diaphragm pumps - 24 feet of tubing for pickup, 6 feet for discharge provided)   Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:12VDC (available in 24vdc special order only, excluding Quad pump)Pump: Working voltage: 8-13vdc Maximum flow: 0.3 - GPM Current: less than 500mA Pump head: 10 feet Pump suction: 5 (vertical) feet Diaphram design, able to run dry for extended periods without damage Life expectancy >1000 hours Control board: Wireless Connectivity Static current: 20mA Working current: 50mA Working voltage: 12vdc [10-14V] Life expectancy: 100,000 cycles Working temperature: - 40 85 °C Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in): Enclosure:  3.0 H x 5.0 W x 5.0 L Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L  Dimensions (mm): Enclosure: 76 H x 128 W x 128 L Rectangular Pickup: 50 H x 60 W x 100 L  Included with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold seperately) with an integrated filter helps reduce harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which unlike other dry bilge systems, eliminates the need for a secondary filter. For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when flow rate has decreased.  BILGE-B-DRY orders DO NOT INCLUDE the stainless holddown bracket!

Read more less

6-Port NPT Bronze Fuel Valve 1/2" Main - 3/8" ReturnFeatures: "L" Flow Pattern Mount feet included C84400 bronze construction Both 1/2" main 3/8" return and 1" main 3/4" return options available Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 10"L WT: 3.05 lbs UPC: 742985142886

Read more less

Smart Macerator Control - 12vMonitors motor and pump to prevent dry run and overload.Features: If pump doesn't prime in 7 seconds or runs dry for 5 seconds, control will shut down pump SMC control can be reset by turning off and on switch - power need not be turned off If power is not turned off to the control, control will job macerator pump for a few milliseconds every seven days to prevent binding of impeller If pump draws more than 20 amps, control will shut down pump WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Misc Box Dimensions: 2"H x 6"W x 8"L WT: 0.5 lbs UPC: 085462035616 Brochure (pdf)

Read more less

Dual Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market! Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every last drop of water from your bilge. Combined with our newest innovative product, EVACUATOR+, your cabin will be odor-free and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY?  Take advantage of:           The world’s ONLY Smart Device enabled Dry Bilge System on the market with customized operation. An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step.” Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical) An environmentally friendly low-profile bilge water pickup design with a proprietary filter system Configured to automatically cycle (5) five times daily for (2) two minutes if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options: Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown. Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes.  This is a great option if you will be away from your boat for a few weeks.  Example:With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled.  If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.  BILGE-B-DRY is available in four 12vdc pump configurations:  (24vdc requests by special order, excluding Quad pump configuration) Single pump (1 motor/diaphragm pump - 12 feet of tubing provided) Dual pump (2 motors/diaphragm pumps - 12 feet of tubing for pickup, 6 feet for discharge provided) Triple pump (3 motors/diaphragm pumps - 18 feet of tubing for pickup, 6 feet for discharge provided) Quad pump (4 motors/diaphragm pumps - 24 feet of tubing for pickup, 6 feet for discharge provided)   Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:12VDC (available in 24vdc special order only, excluding Quad pump)Pump: Working voltage: 8-13vdc Maximum flow: 0.3 - GPM Current: less than 500mA Pump head: 10 feet Pump suction: 5 (vertical) feet Diaphram design, able to run dry for extended periods without damage Life expectancy >1000 hours Control board: Wireless Connectivity Static current: 20mA Working current: 50mA Working voltage: 12vdc [10-14V] Life expectancy: 100,000 cycles Working temperature: - 40 85 °C Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in): Enclosure:  3.0 H x 5.0 W x 5.0 L Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L  Dimensions (mm): Enclosure: 76 H x 128 W x 128 L Rectangular Pickup: 50 H x 60 W x 100 L Included with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold seperately) with an integrated filter helps reduce harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which unlike other dry bilge systems, eliminates the need for a secondary filter.  For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when flow rate has decreased.  BILGE-B-DRY orders DO NOT INCLUDE the stainless holddown bracket!

Read more less

Single Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market! Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every last drop of water from your bilge. Combined with our newest innovative product, EVACUATOR+, your cabin will be odor-free and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY?  Take advantage of:           The world’s ONLY Smart Device enabled Dry Bilge System on the market with customized operation. An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step.” Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical) An environmentally friendly low-profile bilge water pickup design with a proprietary filter system Configured to automatically cycle (5) five times per day for (2) two minutes if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options: Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown. Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes.  This is a great option if you will be away from your boat for a few weeks.  Example:With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled.  If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.  BILGE-B-DRY is available in four 12vdc pump configurations:  (24vdc requests by special order, excluding Quad pump configuration) Single pump (1 motor/diaphragm pump - 12 feet of tubing provided) Dual pump (2 motors/diaphragm pumps - 12 feet of tubing for pickup, 6 feet for discharge provided) Triple pump (3 motors/diaphragm pumps - 18 feet of tubing for pickup, 6 feet for discharge provided) Quad pump (4 motors/diaphragm pumps - 24 feet of tubing for pickup, 6 feet for discharge provided)   Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:12VDC (available in 24vdc special order only, excluding Quad pump)Pump: Working voltage: 8-13vdc Maximum flow: 0.3 - GPM Current: less than 500mA Pump head: 10 feet Pump suction: 5 (vertical) feet Diaphram design, able to run dry for extended periods without damage Life expectancy >1000 hours Control board: Wireless Connectivity Static current: 20mA Working current: 50mA Working voltage: 12vdc [10-14V] Life expectancy: 100,000 cycles Working temperature: - 40 85 °C Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in): Enclosure:  3.0 H x 5.0 W x 5.0 L Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L  Dimensions (mm): Enclosure: 76 H x 128 W x 128 L Rectangular Pickup: 50 H x 60 W x 100 L  Included with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold seperately) with an integrated filter helps reduce harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which unlike other dry bilge systems, eliminates the need for a secondary filter.  For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when flow rate has decreased.  BILGE-B-DRY orders DO NOT INCLUDE the stainless holddown bracket!

Read more less

Aqua-Life® Aerator Dual Output 110V - Greater Than 100 GallonsAqua-Life® Products run so quietly you'll forget you are aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30 inch non-kink air hose. (Hoses and stones also sold separately as an accessory.)Features: Dual pumps-aerates 1 or 2 livewells (Up to 100 gallons) Produces close to 100% saturation of dissolved oxygen Rubber marking feet UL approved 6' power cord Includes: 10ft of flexible air hose, 2 each 3" long air stones, t-connector, 2 anti-siphon valves Specifications: Volts: 110v Box Dimensions: 6"H x 10"W x 10"L WT: 2.15 lbs UPC: 082271214218

Read more less

Replacement Aeration StonesAir stones can become clogged with mineral deposits which hamper their performance. Keep your portable aerator operating at peak efficiency by replacing the air stone on a regular basis.Features: High Output Air Stones quality aeration Premium Air Hose- includes 30 of tough non-kink air hose Includes aerator hose & 2 stones 7" x 5.5" x 1.5" Specifications: Width: 6" Length (Inches): 8" Height: 2" Box Dimensions: 2"H x 6"W x 8"L WT: 0.15 lbs UPC: 082271114280

Read more less