Marine Plumbing & Ventilation

Impeller KitMaterial:NitrileDrive Type:Ding Drive - KeywayNumber of Blades:12Dimensions:Diameter:2-1/4"Shaft Width:1/2"Shaft Diameter:1-1/4"Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Description - 316 S.S. Silcock faucet Specifications: Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 6"L WT: 0.65 lbs UPC: 725060245610

Read more less

Vented LoopVented loops are anti-siphon safety devices for use with both manual and electric marine toilets installed below the waterline (static or heeled).WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Vented Loops Box Dimensions: 2"H x 9"W x 10"L WT: 0.9 lbs UPC: 671880529501 Owner's Manual (pdf)

Read more less

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features machined fittings and strain-relief ends for added durability. Drinking water safe.

Read more less

Quick Pressure Relief Valve for All Sigmar & B3 Heaters Pressure Relief Valve - 1/2" fitting, brass chrome plated, pressured up to 6 bars Bristish standard thread fitting Overall length 1-3/4" Relief/non return that allows discharging of the water heater in case of disuse Specifications: Type: Parts Box Dimensions: 1"H x 8"W x 8"L WT: 0.35 lbs UPC: 8057090079678

Read more less

Marine Holding Tank Vent Filter KitCamco's Marine Holding Tank Vent Filter Kit helps eliminate odors that are released from your boat's holding tank vent. It features granular activated carbon (GAC) for maximum odor control. This allows odorous gases to be properly filtered, helping absorb any holding tank smells. Kit installs easily to your boat's vent hose. The product includes a filter, mounting bracket, and fittings for standard garden hose connections, 3/4-inch, and 5/8-inch barbed hose connections. The mounting bracket measures 12-1/8-inches (L) x 2-3/4-inches (D) x 2-3/4-inches. The filter will last an entire boating season or more, depending on the usage.Features: Helps Eliminate Odors: Kit helps eliminate odors that are released from your boat's holding tank vent Provides Maximum Odor Control: Filter contains granular activated carbon (GAC) for maximum odor control Includes: A filter, mounting bracket, and fittings for standard garden hose connections, 3/4-inch, and 5/8-inch barbed hose connections Easy to Install: Installs easily to your boat's vent hose Dimensions: Mounting bracket measures 12-1/8-inches (L) x 2-3/4-inches (D) x 2-3/4-inches Note: The filter will last an entire boating season or more, depending on the usage

Read more less

Macerator Pump - 12VDesigned specifically for sanitation waste and fish box evacuations, this high-powered pump incorporates a high quality motor with seamless motor tube and O-ring sealed motor end frames.  High-speed rotary cutter shreds waste efficiently, producing a higher discharge capacity. Design allows for direct replacement with other macerators for easy installation.Features: Heavy duty armature shaft seal Manual turn key with rear O-ring seal Innovative internal housing design Seamless motor tube Dual blade design Premium impeller Technical Specifications: Flow Rate - 13 GPM (49.2 LPM) Voltage - 12 V Intake Hose - 1.5" (4 cm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 1.5" Gallons Per Minute: 13 Color: Black Gallons Per Hour: 780 Volts: 12 Type: Pumps/Drives Outlet Size: 1" Operation Method: Electric Size: Compact Size Box Dimensions: 4"H x 6"W x 13"L WT: 5.6 lbs UPC: 666996100690 Owner's Manual (pdf)

Read more less

Turbo 4000 Series II In-Line BlowerPart #: 1747-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 200 CFM Volts: 12v Box Dimensions: 5"H x 5"W x 7"L WT: 1.1 lbs UPC: 022697174741 Quick Guide (pdf)Brochure (pdf)

Read more less

Perko 3/4" Thru-Hull Fitting w/ Pipe Thread BronzeFlange is machined to fit hull and grooved to retain bedding compound. Neckis threaded to approximately 3/8 inch from flange.Cast bronze.Technical Information: Pipe Size Inches: 3/4 Mouting Hole Diameter Inches: 1 Maximum Hull Thickness Inches: 1-1/2 O.D. Flange Inches: 1-7/8 Model Number: 0322DP5PLB Ship Weight: 2.4/11.6 lbs. MADE IN THE USA Specifications: Hose Size: 3/4" Material: Bronze Box Dimensions: 2"H x 2"W x 4"L WT: 0.25 lbs UPC: 085226035951

Read more less

Flexible Adaptor 1-1/2" F to 3/4"1-1/4" F to 3/4" - 1" Hose Barb

Read more less

Heavy-Duty Brass Tap - Chrome PlatedThis basin tap has a heavy-duty chrome-plated brass body.Specifications: Exposes Tap Part Height: 2-1/2" Water Connection: 1/2 in. NPS-M Material: Chrome-plated brass body with chrome-plated ABS plastic knobs Mounting Hole: 7/8 in. Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

Wash Down Pump - 12V - 5.2 GPMPremium wash down pump 12V with capacity 20l/min (5,2GPM). For efficient deckwash or wash down duties. Cut off pressure 5bar (70psi).Features: Easy to install with quick connect ports for 1/2″ or 3/4″ hose  Inlet strainer 40 mesh included Specifications:Fuse Size: 20A Specifications: Volts: 12v Gallons Per Minute: 5.2 GPM Box Dimensions: 5"H x 7"W x 11"L WT: 6.05 lbs UPC: 7340176600646 Brochure (pdf)

Read more less