Piston Rod Assembly with O-RingRaritan's Piston Rod Assembly includes the O-Ring and is made specifically for Raritan's PHII and PHEII.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs
UPC: 085462000423
Electric ConversionsFeatures:
Directly replaces manual pump assembly
Easy to Install
Simple to operate
Dual action control allows water level to be varied
Fits all Jabsco and Par 29090 and 29120 standard and large bowl toilets. Adaptors available to fit many other makes
Suitable for use in above or below waterline installations
Built in macerator
Meets EN50081-2 for Electro Magnetic Compatibility (EMC)
Meets ISO 8846 MARINE and USCG 183.410 for Ignition protection
Self priming up to 0.6m(2ft)
Waste pump discharges over an anti siphon loop up to 1.8m(6ft) and out of a through hull fitting down to 0.9m(3ft) below the surface
Typical power consumption is less than 1.0 amp hour(12 Volt)
Specifications:
Type: Misc
Box Dimensions: 7"H x 10"W x 13"L WT: 7.75 lbs
UPC: 671880520935
Owner's Manual (pdf)
7700D GPH Evacuator High Volume Utility Pump - 12VThe Rule Evacuator high-volume utility pump is ideal for fast evacuation of water from a vessel. A favorite of tow boat operators, the Evacuator is comprised of two 4,000-gallon per hour (GPH) or 15,141 liters per hour (LPH) pumps in tandem, with a net volume at open discharge of 7,700 GPH or 29,148 LPH. The Evacuator pump is a useful utility pump for non-marine applications as well, including dewatering flooded basements, swimming pools, or excavations.A great alternative to gas-powered pumps, the Evacuator simply connects to a 12V battery. A 3-inch discharge hose is required in this application. Features:
High capacity, 12V utility pump
Discharges up to 7,700 GPH (29,148 LPH)
Built-in backup allows each pump to operate independently, if necessary
3-inch barbed discharge port
Long power leads at 7 feet (2 meters)
Specifications:
Gallons Per Hour: 7700 GPH
Operation: Non-Automatic
Outlet Size: 3"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 12"H x 12"W x 15"L WT: 13.65 lbs
Owner's Manual (pdf)
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 1200 GPH
Gallons Per Minute: 20
Operation: Non-Automatic
Outlet Size: 1" or 1-1/8"
Type: Pumps/Drives
Volts: 24v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697024190
Quick Guide (pdf)
Flexmount BlowerHigh volume air intake or extraction blowers for engine room, fuel compartment, galley or headsFeatures:
Flexmounting for 360° adjustable outlet
Slip-on inlet and outlet ducting connection
Low current draw
Dimensionally stable quiet running Delrin rotors
Corrosion resistant materials throughout
Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
ISO 9097 MARINE (Electric Fans)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Ducting: 3"
Open Flow (CFM): 105 CFM
Volts: 12v
Box Dimensions: 7"H x 8"W x 9"L WT: 2.9 lbs
UPC: 671880030526
Owner's Manual (pdf)
974 Portable Toilet with Mounting Brackets -2.6 Gallon - GreyPowerful flushing at the touch of a button sets the new 970 portable toilet series apart from the rest. Requires no manual pumping or batteries, yet delivers a robust bowl-clearing flush every time. The 9.8 L tank, with a tank level indicator, contains enough water for 27 flushes. When it is time to empty it, the extra long discharge pipe is a sure safeguard against mess. Just as convenient as a household toilet.Due to an innovative product design this high-quality toilet offers powerful flushing with less pumping as well as splash-free operation and discharge. Easy to use push-button operation.Features:
High-strength ABS construction withstands harsh environments; smooth, easy-to-clean finish
Prismatic tank level indicator allows easy tank level monitoring
Less mess due to an extra long pivoting discharge spout
Push-button flush clears bowl instantly
Full-size seat for comfort
Latching lid for security
Includes mounting brackets
Technical Specifications:
Color - Grey
Flush Method - Manual Handle
Capacity - 2.6 Gallon/9.8 L
Seat Close - Standard
Weight - 12 Pounds
Set Height - 12.5"
Size - 15.25" Depth x 12.5" Height x 13-2/16" Wide
Water Supply - Freshwater (self-contained)
Discharge - Spout on bottom of tank
New Item # 9108552684 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)
Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Equipped with integrated bypass module to reduce cycling and provide smoother flow
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.13m/min)
Certifications: CE, ISO8846, RCM
Ingress Protection: IPX6
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 4 GPM
Max PSI: 60
Volts: 24v
Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs
UPC: 671880841900
Brochure (pdf)
Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Equipped with integrated bypass module to reduce cycling and provide smoother flow
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.13m/min)
Certifications: CE, ISO8846, RCM
Ingress Protection: IPX6
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12v
Max PSI: 40
Gallons Per Minute: 3 GPM
Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs
UPC: 671880841801
Brochure (pdf)
Par-Max HD4 Heavy Duty Water Pressure Pump - 12V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Equipped with integrated bypass module to reduce cycling and provide smoother flow
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.13m/min)
Certifications: CE, ISO8846, RCM
Ingress Protection: IPX6
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12v
Max PSI: 40
Gallons Per Minute: 4 GPM
Box Dimensions: 5"H x 6"W x 15"L WT: 7.85 lbs
UPC: 671880841863
Brochure (pdf)
Spare Motor for CartridgeUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications:
Type: Replacement Motors
Box Dimensions: 4"H x 6"W x 8"L WT: 0.7 lbs
UPC: 729321285728
Stainless Steel Quick-Release Hose Deck Mount Fitting & Hose AdapterStainless Steel Deck Mount Fitting, 1/2" NPT Female Inlet, 3/4" GHT Male Hose Adapter.The Quick Release Connector provides the perfect installation solution for your HoseCoil washdown or garden style hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again! This clever design will allow you to flush mount the Quick Release into your cockpit or bulkhead.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Tools & Accessories
Box Dimensions: 4"H x 8"W x 8"L WT: 1.4 lbs
UPC: 671880550239
Brochure (pdf)
Nano Eco Compact Toilet Raw Water Kit (No Inlet Pump) - 24VFrom the experts in macerating toilets, Nano toilet utilizes Turbine Technology to produce a powerful, clog-resistant flush. This model is the ultimate combination of a highly efficient marine toilet and the smallest design capable of offering the same comfort as bigger units. It’s the result of a strong relationship with the market and fulfills new requirements for vessels below 50′ (45m). The Thetford Marine product development team has created an extremely elegant design, but also very flexible to install, thanks to its compact size.The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing, and wiring are easy and fast, with virtually no maintenance.Features:
Uses 2 check valves, and this, combined with a water trap, ensures there are no odor issues
Incredibly quiet operation
Can use both raw water and pressure water flush
Leaves a clean, dry bowl after every powerful flush
User-friendly Eco rocker switch (to reduce energy and water consumption) or a smart flush controller with high-end flush and tank control features
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.