Marine Plumbing & Ventilation

Shrimp Shak Bait Holder - 4.25 Gallons with AeratorSpecifically designed and tested to keep saltwater baitfish healthy and active, these pumps can convert any size cooler or livewell into an oxygen-rich aquarium.Features: Cling-on bait screen allows shrimp to climb up and cling to interior walls increasing the volume of bait that can be maintained Durable insulated liner is removable Accessory lid with molded slots holds bait net, aerator, etc. Large, self-standing bait door for easy access Includes a 14331 aerator 4.25" gallon capacity 14.5"x 12.5"x 12.5" Specifications: Width: 13" Length (Inches): 13" Height: 15" Box Dimensions: 12"H x 12"W x 15"L WT: 3.55 lbs UPC: 082271114266

Read more less

Whisper Quiet Deluxe AeratorFeatures: Powerful and quiet rotary pump Water-Resistant gasket design Anti-back-flow check valve Operates on 2 D batteries Universal hang-on clip with stability posts Dual-speed motor with 3-position switch Includes deluxe air stone USB cable with 110V adapter

Read more less

DC 250 CFM Flexmount Continuous Duty 4" BlowersFeatures: Extended Life 5,000 Hour Motor Tough Reinforced Thermoset Plastic Housing Mounts To Any Flat Surface Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Electrical Regulations of Title 33 Chapter I, Part 183 Subpart I and IS0 8846 for Ignition Protection Complies with ISO 9097 Marine CE Conforms with EN 5008-1 for Supression of Electro-magnetic interference WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 250 CFM Volts: 24v Box Dimensions: 11"H x 12"W x 14"L WT: 7.2 lbs UPC: 671880523738 Owner's Manual (pdf)

Read more less

Sliding Vane Self-Priming Diesel Transfer Pump - 9 GPM & 24vDesigned for refueling small sizes diesel powered vehicles [typical tank sizes up to 200 litres (50 U.S. gallons)] from drums.Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity. .Features: Faster refueling - 35 litres/minute (9.5 U.S.GPM). High head capability - 6 meters (19 feet). Self priming up to 2.8 meters (9 feet). Vibration tested. • IP55 protected motor  Specifications: Temperature Range : -30°C to +40°C (-22°F to +104°F)  Pump Body : Aluminium  Rotor : Vectra  Vanes : PTFE Filled Ryton  Shaft : Steel  Seal : Nitrile  Lip Seal Ports : Vertical ½¨ BSP or 19mm hose adaptors (¾¨)  Motor : 24V permanent magnet, corrosion resistant IP55 protected  Duty : 25 mins @ +40°C (104°F) Current Draw: 7 Amps @ 3m head Maximum Current: 10 Amps Brochure (pdf)

Read more less

Fish Box Evacuation Pump - 24VDC 5GPM Diaphragm w/1.5" FittingsThe fish box evacuation pump is perfect for emptying a fishbox after a day's fishing. Typically the fish box is not only used for storing the days catch but very often is used for a cooler for supplies. This means that there can be all manner of debris left in the bottom of the fish box at the end of the day. This self-priming pump is designed for passing typical debris, such as bait residue, particles of ice, fish scales, etc. Its dry-running capabilities and the 360° rotatable head allow this pump to be mounted in almost any position in the boat, allowing for total flexibility.Features: Flexible installation No filter required Compact and simple design 24V Dry running capapbility Connections for 38mm (1-1/2") Ports Up to 19 Liters per Minute (5 US Gallons) flow Relevant standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Minute: 5 GPM Volts: 24v Box Dimensions: 6"H x 8"W x 14"L WT: 6.95 lbs UPC: 671880575928

Read more less

Drain Valve Lubricant - 24ozFeatures: Prevents sticky valves Restores operation Coats plumbing lines for smooth tank outflow Works in both grey and black water tanks Lubricating additive This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Heavy Duty Flexmount BlowerDC 250 CFM Flexmount 4" Blower Tough Reinforced Plastic Housing Universal Flexmount Bracket permits outlet to face any direction Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A Type Accepted Meets USCG Regulations 183.410 and ISO 8846 MARINE for ignition protection Complies with ISO 9097 MARINE VARIATIONS WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 250 CFM Volts: 12v Box Dimensions: 9"H x 11"W x 13"L WT: 6.25 lbs UPC: 671880030250 Owner's Manual (pdf)

Read more less

BS-24 Stainless Steel Basket for SS-1250 & BVS-1250This is a direct replacement basket for the BVS series strainer. The redesign fixes a few design issues concerning past model complications. The BS-24 basket is constructed of stainless steel.Features:Stainless Steel Basket Fits:SS-1250 & BVS-1250 Specifications: Material: Stainless Steel Box Dimensions: 3"H x 3"W x 10"L WT: 0.4 lbs UPC: 742985190757

Read more less

BS-25 Stainless Steel Basket for BVS-1500This is a direct replacement basket for the BVS series strainer. The redesign fixes a few design issues concerning past model complications. The BS-25 basket is constructed of stainless steel.Features:Stainless Steel Basket Fits:BVS-1500 Specifications: Material: Stainless Steel Box Dimensions: 4"H x 4"W x 9"L WT: 0.55 lbs UPC: 742985191181

Read more less

Bronze Pipe Nipple - 1" NPT Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.35 lbs UPC: 742985143654

Read more less

Bronze Vented Loop - 1" Hose Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard. Overboard venting is required if PVL or HVL series is used in an exhaust system. HVL and PVL series vented loops assure clog-free anti-siphon protection for sanitation or engine exhaust systems. The oversized vent valve can easily be removed for inspection or cleaning without tools. Mount Hardware is included. Specifications: Type: Vented Loops Box Dimensions: 3"H x 7"W x 8"L WT: 2 lbs UPC: 742985003071

Read more less

ARG-500 Series 1/2" Raw Water Strainer with Stainless Steel BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D Specifications: Material: Stainless Steel Box Dimensions: 5"H x 5"W x 10"L WT: 4.15 lbs UPC: 742985060616

Read more less