Marine Plumbing & Ventilation

Valve Kit EPDMThe Jabsco's Valve Kit EPDM is a check valve kit, EPDM for a Jabsco diaphragm pump.

Read more less

HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 8"W x 18"L WT: 10 lbs UPC: 671880842006 Brochure (pdf)

Read more less

Mastercraft Ballast Pump - 12VThe Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together and your surfing and wakeboarding again.Features: Same electrical connection as original OEM Same mounting as the OEM unit, no need to drill more holes The leader for flexible Impeller Ballast Pumps WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 5"H x 6"W x 10"L WT: 6.8 lbs UPC: 671880629003

Read more less

Rule-Mate® 500 Fully Automated Bilge Pump - 12VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 500 GPH/1893LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Operation: Automatic Gallons Per Hour: 500 GPH Volts: 12v Box Dimensions: 4"H x 7"W x 9"L WT: 1.1 lbs UPC: 042237106230

Read more less

11850 - 11 Gallon Water Heater - 240V Kuuma's Premium 11 Gallon Water Heater is perfect for a new installation or as a replacement to an existing water heater.   Constructed of corrosion-resistant, marine-quality aluminum and heats water with the use of an electrical power or integrated heat exchanger.Features: Ignition protected controls Mounting tabs Manual reset Technical Specifications:  Capacity - 11 Gallon Electrical Input - 240V Orientation - Horizontal Mounting Brackets - Side to Side Heating Source - Front heat exchange Maximum Water Temperature - 210°F T & P Valve Type - 100psi and 210° F Wiring Configuration - L1 and N Dimensions (W x H x D) - 18-7/8" x 16-1/4" x 21-5/8" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 11 Heat Exchanger: Yes Volts: 240 Box Dimensions: 19"H x 19"W x 26"L WT: 29.25 lbs UPC: 014717118507 Owner's Manual (pdf)Brochure (pdf)

Read more less

Pontoon PumpThe float pump, designed originally for pumping out seaplane pontoons, offers the standard features of a "Thirsty-Mate_" pump with the addition of a flexible foot and tapered collar that fits standard funnels in most pontoons. The foot is threaded to accept 1 1/4" (FH 1-1/4) wire-reinforced hose for those who want to extend the reach of their pump.Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the foot onto the pump body, providing high visibility as well as flotation.

Read more less

Shower Drain Box with 1100 GPH Pump - 12VThis compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer. Specifications: Type: Shower Drains Gallons Per Hour: 1100 GPH Volts: 12v Box Dimensions: 6"H x 10"W x 12"L WT: 4.1 lbs UPC: 042237106575

Read more less

3700 GPH General Purpose End Suction Centrifugal Pump - 24VThe Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 24 volts DC. Features: 3700-GPH 24-Volt White/Red 3-Year Warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Hi-Water Bilge AlarmThe High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned com part ment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires a visual and audible alarm in each unmanned space on commercial vessels at least 26' (7.9m) in length.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Alarms Box Dimensions: 4"H x 6"W x 10"L WT: 0.7 lbs UPC: 042237095770 Owner's Manual (pdf)

Read more less

Light Duty Vane PumpDiesel Transfer PumpFlow rate: 6 USgallons/minSelf-priming from dry up to 3ftThe Jabsco Reversible Rotary Vane Pump is ideal for transferring diesel fuel. It is self-priming to about three feet and can pump against a discharge head up to twenty feet. Features: The pump head may be mounted at 90° increments on the motor to allow mounting as needed Meets USCG 183.410 & ISO8846 Marine (Ignition Protection) MotorIntermittant duty permanent magnet typePort Type1/2" NPT Female or 1" (25mm) Hose barb WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 6 GPM Reversible: No Volts: 12v Box Dimensions: 5"H x 6"W x 9"L WT: 0.7 lbs UPC: 671880532198 Owner's Manual (pdf)

Read more less

Talulah Ballast Pump - 13.5 GPM - 12VFeatures: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO 10133) Recommend fresh batteries and engine running (alternator running) to ensure power supply *Dry Run

Read more less

Heavy Duty Bilge Pump 2200 series 12vThe best choice when you are looking for high performance, heavy duty pumpsdesigned to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.CE-ApprovedFeatures: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 120 l/min - 1900 GPH Capacity straight (13.6 V/27 V): 130 l/min - 2060 GPH Amperage: 7.5 A Fuse Size: 12 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 177 mm - 7" Weight 2.7 kg - 6 lbs Specifications: Gallons Per Hour: 2200 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 6"H x 7"W x 7"L WT: 5.6 lbs UPC: 729321220040

Read more less