EvoFlex Drinking Water Hose - 10'Camco’s Evo Flex 10-Foot Drinking Water Hose with 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. Features nickel-plated machined fittings. Drinking water safe with a lead-free, BPA-free and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV-stabilized for a long life. Made in the USA.Features:
Extra Flexible Design: Holds no memory, making it easier to position and store
The Perfect Size Hose: 10-foot hose with 5/8-inch ID
Drinking Water Safe: Contains a BPA-free, lead-free and phthalate-free formulation
Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water
Durable Construction: Features nickel-plated machined fittings; UV-Stabilized: For a long life
Made in the USA: Product is proudly made in the USA
Supersub 24V 1100GPH Low Profile Automatic Bilge PumpThe narrow low profile compact bilge pump range.Supersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features
Low narrow design for confined bilge spaces
Easy installation - outlet and pump body rotate to suit your installation
High performance - Flow up to 1100 US gals per hour
Efficient operation - Very low power consumption
Easy to clean- snap fit assembly
Low profile strainer - Leaves the bilge almost dry
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1100 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Volts: 24v
Type: Electric
Box Dimensions: 3"H x 6"W x 11"L WT: 1.25 lbs
UPC: 766478945112
Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:9Dimensions:
Diameter:3-3/4"
Shaft Width:1"
Shaft Diameter:2-1/2"
Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Bora II 12 - 24V - 3-Speed - 6" Marine Fan - BlackOutlasts and outperforms the competition. Superior airflow can provide any area with cool comfort. 3-speed touch control.The quietest and most powerful marine fan in its class! The model 748 Bora II 12 - 24V fan is ideal for sleeping areas, main salons, cockpits, or the galley. The Bora II features a long-life motor with center push control, as well as grills on the front and back and a built-in handle for easy up/down or side-to-side positioning.Features:
3-speed touch control
Long-life 5000+ motor
Compact design
Newly designed high-efficiency blade
Fully guarded on front and back
Locking cam mount
Low power draw
Benefits:
Maximum airflow with minimum noise
Match the fan speed to the application
Greater boater safety
Easy to install
Matches any boat interior
The fan stays in place in rough seas
Battery friendly
Mounts sideways, upright, or downwards
Brochure (pdf)
Bora II 12 - 24V - 3-Speed - 6" Marine Fan - WhiteOutlasts and outperforms the competition. Superior airflow can provide any area with cool comfort. 3-speed touch control.The quietest and most powerful marine fan in its class! The model 748 Bora II 12 - 24V fan is ideal for sleeping areas, main salons, cockpits, or the galley. The Bora II features a long-life motor with center push control, as well as grills on the front and back and a built-in handle for easy up/down or side-to-side positioning.Features:
3-speed touch control
Long-life 5000+ motor
Compact design
Newly designed high-efficiency blade
Fully guarded on front and back
Locking cam mount
Low power draw
Benefits:
Maximum airflow with minimum noise
Match the fan speed to the application
Greater boater safety
Easy to install
Matches any boat interior
The fan stays in place in rough seas
Battery friendly
Mounts sideways, upright, or downwards
Brochure (pdf)
Regular Toilet Seat with Soft Close LidFeatures:
For regular-size bowl toilets from 2018 only (flat edge at the back and Jabsco logo)
Composite plastic seat
Lid dimensions - 423mm x 365mm/155mm between fitting holes
Hinges included
Packaged Dimensions: L:50.00 x H:40.00 x W:40.00cm
Actual Weight: 2.88kg (Approx. 3.38kg packed)
Ballast King Bronze DC Pump with Deutsch Connector - No Reversing Switch - 15 GPM Wakeboard and Ski Boat Ballast PumpFeatures:
Flow rate: 15 US gallons/min (57 Litres/min)
Self-priming from dry up to 1.2m (4ft)
Adds approx 125lbs (56kgs) of ballast per minute
Reversible to both fill and empty tanks
Simple design means fewer wearing parts
ISO 8846 MARINE (Ignition protection)
Applications:The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. Specifications:
Body Materials: Bronze
Impeller: Jabsco Neoprene compound
Seal: Lip Type
Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb
Voltage: 12 (Vdc)
Amp Draw: 19 (amp)
Fuse Size: 25 (amp)
Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible
Duty Cycle: 30 Minutes Max
Dimensions: 3 5/8 x 8 x 4 3/4 (inches)
Brochure (pdf)
In-Line Non-Return Check Valve - 1"In-line non-return valve. Connections for 25mm (1”) bore hose.Features:
Connections: - for 25mm (1”) bore hose
Dimensions: - 108mm long, 55mm wide, 50mm high (in-line configuration)
Aids pump priming, prevents backflow from pump into bilge
Fits into pump suction line
Robust plastic construction with nitrile rubber valve
Adjustable port configuration for convenient hose angle
Actual Weight: 0.11 Kg (Approx. 0.31 Kg packed)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Ballast King ImpellerFeatures:
Replacement Impeller
Fits Ballast King
Jabsco is a worldwide leading manufacture of products for the leisure marine market including water system, engine cooling pumps, searchlights and marine waste systems. Jabsco also offers industrial pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
Manual Marine Toilet - Regular BowlFrom best-selling manual toilets to household-style luxury models, Jabsco marine toilets are both simple and reliable. Popular worldwide for more than two decades, Jabsco‘s sturdy manual toilet ensures peace of mind thanks to the intuitive, simple to use Twist ‘n‘ Lock feature. It provides protection against siphonic flooding and waste backflow with one easy, 90° turn of a handle. Features:
A powerful self-priming pump allows installation above or below the waterline
A reversible mounting gives the option to install the pump on the right or left
A flexible design makes it suitable for either overboard or holding tank discharge
Corrosion-resistant materials throughout permit salt and fresh water service
Fastenings face front or top for ease of maintenance
For use with sea, river or lake water only
Raw water
Wood - Standard Close lid
Regular bowl size
Specifications:
Size: Household Size
Color: White
Operation Method: Manual
Rinse Water: RAW
Type: Toilet
Box Dimensions: 17"H x 21"W x 21"L WT: 28.35 lbs
UPC: 671880628280
Motor/Pump Assembly f/37010 Series Electric ToiletsJabsco's spare motor/pump assembly is for the 37010 Series Electric Toilets. Includes:
Maceratior housing
12V motor
Centrifugal impeller
Flexible impeller slinger
Gaskets
Seals
Screws
O-rings
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 6"H x 8"W x 10"L WT: 4.95 lbs
UPC: 671880032834