Marine Plumbing & Ventilation

12 GPM Macerator Pump - 24VThe Macerator Pump is engineered to tackle the toughest marine and RV waste management challenges. Featuring a powerful quad-blade chopping system and a triple-sealed motor, this pump is built to easily handle the emptying of holding tanks, fish boxes, and livewells. Its robust design includes anti-clog technology, ensuring consistent operation even with challenging debris.This pump delivers an impressive 12 GPM flow rate, allowing you to empty a 30-gallon tank in less than three minutes. With a self-priming suction up to 4 feet, the Macerator Pump guarantees reliable performance every time. Designed for durability, the pump's sealed motor is o-ring protected, thermally shielded, and powder-coated to resist both internal and external corrosion. The quick-connect wiring system simplifies installation and replacement, making this pump a dependable choice for marine and RV applications.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows the user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Quad-Blade Chopping Design: The advanced quad-blade system efficiently grinds waste, minimizing the risk of clogs and ensuring consistent operation even with demanding tasks. High Flow Rate: Delivers a powerful 12 GPM (45 LPM), making it ideal for quickly emptying holding tanks, livewells, and fish boxes in less than three minutes. Triple-Sealed Motor for Durability: Features o-ring sealed end bells, sealed bearings, and a powder-coated shell, protecting the motor from internal and external corrosion in harsh marine environments. Self-Priming to 4 Feet: The pump’s self-priming capability ensures reliable suction, making it suitable for varied installation heights and conditions. Anti-Clog Technology: Includes a rear anti-clog system and an easy-access knob for clearing blockages, ensuring smooth operation during waste disposal. Ignition Protected: Designed to meet ISO 8846 Marine standards, making it safe for use in engine compartments and other confined spaces. Quick-Connect Wiring: Simplifies installation and replacement, saving time and effort for users during maintenance or upgrades. Run-Dry Protection: Built-in thermal sensors allow the pump to run dry for short periods, preventing damage during priming or unexpected interruptions. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Voltage: 24V Open Flow Rate: 12 GPM (45 LPM) Ports: 1-1/2” MNPT Inlet, 1” Hose Barb Outlet Impeller Material: Rubber & Copper Max Draw: 12.0A (12V) / 6.0A (24V) Dimensions (L x W x H): 13.78" x 5.12" x 4.33" (35.0 x 13.0 x 11.0 cm) Included Components: Commodore DC Macerator Pump (24V) 1-1/2” MNPT Inlet Adapter 1” Hose Barb Outlet Adapter Quick-Connect Wiring System Specifications: Color: Black/White Gallons Per Minute: 12 Inlet Size: 1-1/2" Operation Method: Electric Outlet Size: 1" Type: Macerator Pumps Volts: 24 Box Dimensions: 5"H x 6"W x 13"L WT: 5.8 lbs UPC: 817683023277

Read more less

Triple Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Triple Pump 12VDC:Three motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications:Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.0 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.75 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L  Weight 2.2 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

Deluxe Flush Electric Toilet - Raw Water PumpFeatures: Inlet 3/4" Hose Barb Soft close seat safety and quiet High-capacity bowl discharge pump makes toilet flushing quieter Outlet 1-1/2" Hose Barb Easy-to-clean ceramic bowl All plumbing and wiring are easily concealed Specifications: Voltage: 12V Max Draw: 20A Port: Inlet 3/4" Hose Barb, Outlet 1-1/2" Hose Barb Materials: Ceramic bowl, Soft close seat Features: Built-in macerator Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: RAW Type: Toilet Volts: 12 Box Dimensions: 18"H x 20"W x 23"L WT: 70 lbs UPC: 817683023475

Read more less

Deluxe Flush Electric Toilet with Solenoid Valve - Fresh Water PumpFeatures: Inlet 3/4" Hose Barb Soft close seat safety and quiet High-capacity bowl discharge pump makes toilet flushing quieter Outlet 1-1/2" Hose Barb Easy-to-clean ceramic bowl All plumbing and wiring are easily concealed Specifications: Voltage: 12V Max Draw: 20A Port: Inlet 3/4" Hose Barb, Outlet 1-1/2" Hose Barb Materials: Ceramic bowl, Soft close seat Features: Built-in macerator Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: Fresh Type: Toilet Volts: 12 Box Dimensions: 18"H x 20"W x 23"L WT: 63.85 lbs UPC: 817683023468

Read more less

Electric Marine Toilet - Rear Macerator - Regular SizeThe Electric Marine Toilet – Regular Size brings comfort, durability, and efficiency to marine sanitation systems. Featuring a convenient push-button flush and a high-capacity macerator pump, this electric toilet delivers hassle-free operation for both above and below-waterline installations. The easy-to-clean ceramic bowl with crevice-free contours ensures superior hygiene, while the soft-close seat adds a touch of luxury and prevents slamming.Built for long-lasting performance in harsh marine environments, the CM1RMT toilet includes a flexible impeller flush pump and a permanent magnet motor with a stainless steel shaft, ensuring durability and reliability. It's corrosion-resistant construction and built-in backflow preventer protect your system, keeping it efficient and clean. Whether for a yacht, boat, or other marine applications, this toilet offers seamless operation and is designed to withstand the toughest conditions.Features: Convenient Push-Button Flush: Designed for simplicity, the electric flush system provides powerful and efficient operation at the touch of a button, eliminating manual pumping. High-Performance Macerator Pump: Equipped with a self-priming macerator pump that grinds waste efficiently and pumps it out, ensuring reliable operation without clogging. Soft-Close Seat and Hygienic Design: Features a soft-close seat to prevent slamming and an easy-to-clean ceramic bowl with smooth, crevice-free contours for added hygiene. Corrosion-Resistant Build: Constructed with marine-grade materials, including a stainless steel shaft and enamel-coated components, to withstand harsh marine conditions. Built-In Backflow Preventer: Integrated backflow prevention ensures waste and water do not flow back into the bowl, keeping your system clean and functional. Flexible Installation: Suitable for both above and below-waterline installations, offering flexibility for various marine sanitation setups. Reliable Permanent Magnet Motor: Features a fully enclosed motor with a stainless-steel shaft, ensuring durability, low noise, and consistent performance in marine environments. Compact, Space-Saving Design: With dimensions optimized for marine applications, this toilet provides comfort without compromising space on yachts, boats, or other marine vessels. Specifications: Type: Electric Control Type: Switch Panel Max Draw: 24A @12V 13A @24V Size: Regular Diameter: 3/4" Inlet 1" Diameter Material: Ceramic bowl, soft closed seat Dimensions: 18.99'' x 18.24" x 13.18'' Weight: 35.05 lbs Included Components: Commodore CM1RMT Electric Marine Toilet Heavy-Duty Push-Button Switch Panel 3/4" Inlet and 1" Discharge Hose Adapter (Includes 1"-1/2" Option) Specifications: Color: White Gallons Per Minute: 5 Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" Type: Toilet Volts: 12v Box Dimensions: 16"H x 17"W x 21"L WT: 36.45 lbs UPC: 817683023413

Read more less

Electric Marine Toilet - Twist Flush - Regular SizeThe Commodore Electric Marine Toilet – Regular Size offers the perfect combination of modern convenience, durability, and performance for any marine environment. Equipped with a powerful electric flush pump and a built-in macerator featuring a stainless steel chopper plate, this toilet ensures efficient waste grinding and evacuation. The soft-close seat adds comfort, while the easy-to-clean ceramic bowl with smooth contours enhances hygiene and prevents buildup.Designed for versatility, the CM2RMT marine toilet is suitable for above and below-waterline installations and supports both left- and right-handed configurations. Its permanent magnet motor with a stainless-steel shaft delivers reliable performance and long-lasting operation, even in the harshest marine conditions. Built with corrosion-resistant materials, this electric toilet is the ideal upgrade for boat owners looking to convert a manual head into a hassle-free electric solution.Features: Powerful Electric Flush Pump: The integrated flush pump provides an open flow rate of 18.9 LPM, delivering a reliable, powerful rinse that ensures a clean and efficient flush every time. Built-In Macerator with Stainless Steel Chopper Plate: The self-priming macerator pump grinds waste efficiently, reducing the risk of clogging and enabling smooth discharge through the plumbing system. Soft-Close Seat for Comfort: The soft-close seat eliminates slamming, providing a quiet and luxurious experience while ensuring durability in high-use marine settings. Easy-to-Clean Ceramic Bowl: Featuring a smooth, crevice-free design, the high-quality ceramic bowl is simple to clean, improving hygiene and reducing maintenance time. Flexible Installation Options: Suitable for both above- and below-waterline installations with left- and right-handed compatibility, offering versatility for any marine setup. Corrosion-Resistant Marine-Grade Construction: Built with all corrosion-resistant materials and a stainless-steel motor shaft to withstand saltwater environments and ensure long-lasting durability. Converts Manual Heads to Electric Operation: Upgrade your existing manual toilet to an electric system without replacing the entire unit, saving time and costs while adding modern convenience. Permanent Magnet Motor: The enclosed, permanent magnet-type motor with stainless steel components ensures quiet operation, low power draw, and a long service life. Specifications: Type: Electric Control Type: Switch Panel Max Draw: 24A @12V 13A @24V Size: Regular Diameter: 3/4" Inlet 1" Discharge Material: Ceramic Bowl, Soft Close Seat Dimension: 19.29"L x 17.52"W x 16.93"H Included Components: Commodore CM2RMT Electric Marine Toilet – Regular Size Heavy-Duty Rotary Switch Panel 3/4" Inlet and 1" Discharge Hose Adapter Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" Type: Toilet Volts: 12 Box Dimensions: 15"H x 20"W x 21"L WT: 39.2 lbs UPC: 817683023420 Brochure (pdf)

Read more less

2000 GPH Non-Automatic Bilge Pump - 12VThe 2000 GPH Non-Automatic Bilge Pump is engineered for superior performance, durability, and ease of maintenance. Designed for marine applications, this high-capacity pump operates via a separate float or panel switch, providing complete user control. Its advanced anti-airlock technology, moisture-tight seals, and stainless-steel motor shaft ensure consistent operation even in the harshest marine conditions.Featuring a quick-connect design, the pump, base, and wiring can be replaced in seconds without disrupting plumbing connections. The robust impeller design, combined with its high-efficiency motor, delivers exceptional water evacuation while operating quietly with low energy draw. Dual-size straight and 90-degree outlet fittings provide flexibility for a variety of installation setups.Whether you’re upgrading or maintaining your bilge system, the CM-A31-2000B ensures reliable and hassle-free performance, meeting the highest safety and marine standards.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Powerful Water Evacuation: Delivers a high flow rate of 2000 GPH, efficiently clearing large volumes of water to keep your bilge dry and safe in critical conditions. Non-Automatic Operation: Requires a separate float switch or manual panel switch, giving boat owners full control over when the pump activates. Anti-Airlock Technology: The advanced impeller design prevents airlocks, ensuring smooth and uninterrupted operation in any marine environment. Dual Outlet Compatibility: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, offering flexibility for various plumbing configurations. Marine-Grade Durability: Features a high-efficiency motor with a stainless-steel shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting reliability. Meets Safety Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safe marine operation. Quiet and Energy-Efficient Operation: The high-efficiency motor operates quietly with a low amp draw, minimizing power consumption without sacrificing performance. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring dependable operation and peace of mind for marine enthusiasts. Specifications: Voltage: 12V Flow Rate: 2000 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 7.5A (12V) / 4.0A (24V) Head: 18.04 ft (5.5m) Unit Weight: 1.71 lbs (0.78 kg) Included Components: Dual-size straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 2000 Operation: Non-Automatic Volts: 12V Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683022980 Brochure (pdf)

Read more less

2000 GPH Automatic AMP Sensor Bilge Pump - 24VThe 2000 GPH Automatic Bilge Pump is designed for superior performance, durability, and convenience. With a high flow rate of 2000 GPH and innovative electronic sensing technology, this pump operates without the need for an external float switch. The advanced design checks for water every 2.5 minutes and activates only when necessary, ensuring efficient water removal. Its quick-connect system allows for easy maintenance and replacement, while robust construction ensures reliability in harsh marine environments. Whether you’re replacing or upgrading your bilge pump, the 2000 GPH model offers unmatched performance and ease of use.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Automatic Operation: Innovative electronic sensing technology activates the pump only when water is detected. The pump checks for water every 2.5 minutes, running for just 0.5 seconds to conserve energy. High-Performance Flow Rate: Capable of pumping up to 2000 GPH, this pump quickly clears bilge water, even in demanding marine conditions. Anti-Airlock Protection: Features a vented impeller housing that prevents airlock, ensuring consistent and reliable performance at all times. Durable Marine-Grade Construction: Built with a stainless-steel motor shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting performance in harsh environments. Dual Outlet Options: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, ensuring flexible compatibility with various installations. Built-In Check Valve: Prevents water backflow into the bilge, maintaining a dry environment and enhancing overall efficiency. Specifications: Weight: 1.71 lbs Flow rate: 2000 GPH (Gallons Per Hour) Volts: 24V Current: 7.5A Head: 18.04' (5.5m) Outlet Diameter: 1-1/8 inch (29mm) Included Components: Standard straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect plumbing and wiring Specifications: Gallons Per Hour: 2000 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 24 Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683023482

Read more less

Ballast SuperKing Pump with Deutsch Connector - 20 GPMWhen you’re having fun on a wakeboard, skis, or a tube, a bigger wake will create a more exhilarating ride. Xylem’s Jabsco ballast pumping systems, including the Ballast Puppy, Ballast King, and Ballast SuperKing, make taking on weight easy with tanks that rapidly fill at the touch of a button. Systems can be emptied quickly as well.Features: Run dry impellers Flow rates 9-25 gallons per minute (GPM) or 34-95 liters per minute (LPM) Adds approximately 80-200 pounds (36-91 kgs) of ballast water per minute Self-priming to 3 or 4 feet (0.9 or 1.2 meters) All comply with USCG 183.410 and ISO 8846 Marine (Ignition Protection) Reversing Polarity Switch available (Puppy and King products only) Specifications: Ports: 1-1/4" (32 mm) hose barb Deutsch connector No reversing switch Ballast SuperKing Impeller (2 needed) Quick Guide (pdf)

Read more less

Waste Water 43L (11.5 GPM) - 12VMacerator Pump 12V equipped with rotary cutter and impeller to discharge waste water with high capacity.Capacity 43 L/min (11,5 GMP) output at 4m total head. Self priming up to 3m vertical lift.Brass and stainless steel internal parts and pump body in thermo polymer with a long lasting impeller. Inlet port 38mm (1,5″) and outlet 25mm (1″). 12A fuse. Interchangeable with Jabsco 18590-2092, Johnson Pump 10-24453-04.Specifications: Weight: 1.98 kg/4 lbs Dimensions: 240/9.4L x 90/3.5H x 130/5W mm/in  Type: Black Water *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Color: Black Gallons Per Minute: 11.5 GPM Inlet Size: 1-1/2" Outlet Size: 1" Volts: 12v Type: Waste Pumps Box Dimensions: 4"H x 5"W x 11"L WT: 4.65 lbs UPC: 7340176600776

Read more less

Impeller Kit - 10 Blade - Neoprene - 2" Diameter x 7/8"W Pin Drive InsertMaterial: NeopreneInsert Material:BrassDrive Type: Slotted Shaft Pin Drive or Through Hole Pin DriveNumber of Blades: 10Dimensions:Diameter:2"Shaft Width:1/2"Shaft Diameter:7/8"Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Vented LoopVented loops are anti-siphon safety devices for use with both manual and electric marine toilets installed below the waterline (static or heeled)WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Vented Loops Box Dimensions: 2"H x 9"W x 10"L WT: 0.5 lbs UPC: 671880529495 Owner's Manual (pdf)

Read more less