Marine Plumbing & Ventilation

Tsunami Mk2 T1200 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 3-1/2" x 1-1/8" thru-hull Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications:Flow Gallon/Hour: 1200 Specifications: Gallons Per Hour: 1200 Inlet Style: Angled Volts: 12v Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs UPC: 022697025456

Read more less

2-Way Waste Manifold - 12' Cable - 3/4" PortsThis manifold manages waste from multiple drains with intelligent control built in. A compact automatic system handles waste drainage from the two outlets. Must be used with Gulper® IC.The two-way manifold IC is connected to a Gulper® IC. When the manifold senses water, it sends an electrical signal to the Gulper® IC, which evacuates the system. As the water level decreases, the electrical signal transmitted by the manifold will cease, and the Gulper® IC will continue to operate for a further 15 seconds before turning off. IC – Intelligent Control TechnologyAt the heart of every Whale IC product lies innovative electronic control circuitry built in. This enables the IC sensor accessories to communicate directly with the IC pumps to control the performance. These accessories send signals to built-in intelligent software, which then controls the pumps to react as required.Specifications: Cable Length: 4m (12ft) Inlet Hose Connections: 3/4" (19mm) Outlet Hose Connections: 3/4" (19mm) Control Voltage: 5V dc via Gulper® IC Current Draw: Low power 0.01 Amps supply Connectors: Deutsch® Connectors: Quick Connect Series 7 ways (directly onto Gulper® IC) Specifications: Inlet Size: 3/4" Operation Method: Electric Outlet Size: 3/4" Box Dimensions: 6"H x 6"W x 6"L WT: 1.4 lbs UPC: 766478944931

Read more less

Tsunami Mk2 T800 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 3-1/2" x 3/4" thru-hull Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications:Flow Gallon/Hour: 800 Specifications: Gallons Per Hour: 800 Inlet Style: Angled Volts: 12v Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs UPC: 022697025449

Read more less

Crank Shaft Engine Cooling PumpThis crank shaft engine cooling pump is interchangeable with F6B-9, Johnson Pump 10-24930-01 replaces Johnson 10-24915-01, Johnson 10-24805-01, Johnson 10-24232-01, and Indmar 685001, which converts pulley-driven to crank shaft-driven mounts for Ford or GM V6/V8 marine engine blocks. Other applicable engine blocks include PCM, Crusader, Mercruiser, and more.

Read more less

Quiet Flush E2 Fresh Water Toilet Regular Bowl - 12V - Soft Close LidFrom crowded charter boats to racing yachts and everything in between, the award-winning Jabsco Quiet Flush E2 marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its simplified installation, ease of serviceability, and sleek touch sensor control, the Quiet Flush E2 brings a whole new level of convenience and comfort to the water.Easy 2 InstallThe Quiet Flush E2 gives even the occasional boater the confidence to install this toilet. For maximum flexibility in tight spaces, the base can be rotated, allowing you to install the pump with the discharge to the left, right, or rear.Easy 2 ServiceDesigned for recreational craft but built to withstand the abuse of commercial use, the quick-release system provides easy access to the macerator pump and discharge hose with no tools needed.Easy 2 OperateMarine toilets bring the comfort of home with you, but there are additional considerations on a boat, which is why the Quiet Flush E2 puts you in complete control. With its sleek touch sensor panel, you can choose three settings — including a water-saving, eco-flush cycle.Installation: Base can be rotated to the left, right, or rear of the bowl to suit multiple installation options Discharge pump can be rotated 180° to suit the base orientation and ensure pipework is routed to the rear of the toilet Straight or 90° discharge port for easy install Quick Release for Easy Servicing: Quick release system allows for fast and easy removal of discharge pump and hose when servicing is necessary C-Clip design releases the pump assembly from the toilet base without the need for tools, resulting in fast service time Multi-Function Touch Panel: Stylish low-profile design Touch-sensitive operation Eco flush, full flush, or empty functions Only 1-litre (1-quart) per flush using eco mode Designed for wet room installations No spill ‘empty’ feature to leave bowl dry when the boat is in motion Specifications: Bowl Size: Regular Seat & Lid: Composite Slow-Close Lid: Yes Water: On-board fresh water Device: Solenoid valve Flush Control Switch: Touch Panel Voltage DC: 12 Recommended Fuse Size: 25 amp Dimensions: Height: 14.4 in. (365 mm) Width: 14.8 in. (375 mm) Depth: 18.9 in. (480 mm) Weight: 38.6 lbs (17.5 kg) Specifications: Rinse Water: Fresh Type: Toilet Volts: 12v Box Dimensions: 21"H x 24"W x 24"L WT: 45.9 lbs UPC: 671880640978 Quick Guide (pdf)

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve

Read more less

Straight Handle Pull Out Sprayer - White with 6' HoseThis straight-handled sprayer is as reliable as it is functional.Features: White sprayer with 6 ft. white nylon hose Included counter-top holder leaves the sprayer in a ready-for-action position Sprayer handle features a trigger sprayer for on/off control or a flip-up lock for continuous water flow Specifications: Water Connection: 3/8 in. BSP-F fitting Material: Glass reinforced plastic sprayer with nylon or chrome plated brass hose Mounting Hole: 1-1/16 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

Brushed Stainless Steel Oval Sink - 13.25" x 10.5"This oval basin is 10 x 13 in. and is brushed-finished with a large (1 in.) flange.Specifications: Material: 18/8 stainless steel  Flange Profile: A Flange Width: 1 in. Depth: 5 in. Drain Opening: 1-11/16 in. Shipping Weight: 5 lbs.

Read more less

Tap with Folding Spout - ChromeThis folding cold-water tap is ideal for installing in a sink, under a seat, or in a bait station. Vertical or horizontal installation.Specifications: Water Connection: 3/8 in. BSP-M threaded shaft, 1/2 in. NPS-M adapter included Material: Chrome-plated brass with a clear acrylic knob Mounting Hole: 5/8 in. Shipping Weight: 4 lbs.  *The "P" within the part number indicates retail packaging

Read more less

Stainless Steel Basin Sink - 11.5" x 5" - Brushed FinishThis is a brushed-finish 10 in. basin sink, and it's just the right size for smaller heads.Specifications:Material: 18/10 Stainless Steel Flange Profile: A Flange Width: 3/4 in. Depth: 5 in. Drain Opening: 2-1/16 in. Shipping Weight: 5 lbs

Read more less

Nordic Folding Stainless Steel J-Spout TapThis j-spout cold water tap is made of durable, low-maintenance Passivated 304 stainless steel This light-weight cold water tap is perfect for installation on the flybridge, bar, or aft cockpit locations.Specifications: Widest Point of the J-Spout: 6-1/4" Water Connection: 1/2 in. NPS-M Material: Passivated 304 stainless steel, brush finish Mounting Hole: 7/8 in. Shipping Weight: 5 Lbs.

Read more less

Stainless Steel Sink Basin - 9" x 4" - Mirror FinishThis is the smallest Scandvik basin sink.Specifications:Material: 18/10 Stainless Steel (mirror finish) Flange Profile: B Flange Width: 5/8 in. Depth: 4 in. Drain Opening: 2-1/16 in. Shipping Weight: 4 lbs.

Read more less