Marine Plumbing & Ventilation

1700 Series Water Heater120v20 GallonW/O Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 20 Heat Exchanger: No Volts: 120v Box Dimensions: 22"H x 22"W x 28"L WT: 65 lbs UPC: 085462001598 Owner's Manual (pdf)Brochure (pdf)

Read more less

18A Float SwitchThe 02-Series Automatic Float Switch transforms any manual bilge pump into an efficient and reliable automatic system. Designed with a unique ball-bearing activation mechanism, this float switch provides superior reliability and longevity compared to traditional reed switches. Built to handle bilge pumps with a maximum current draw of 18A, the switch is compatible with 12V, 24V, and 32V DC systems, making it versatile for a variety of marine applications.Fully submersible and made with high-quality ABS material, the switch is sealed using ultrasonic welding to ensure leak-proof operation. With a compact design and straightforward installation, it seamlessly integrates into any marine system. The ignition-protected construction and mercury-free design guarantee safe and eco-friendly performance, while its long lifespan ensures consistent operation through millions of cycles.Features: Converts Manual Bilge Pumps to Automatic: This float switch transforms any compatible bilge pump into an automatic system, activating the pump when water levels reach 2.36 inches and deactivating it at 1.18 inches. Unique Ball Bearing Design: Features an internal weighted ball bearing activation mechanism for superior reliability and smoother operation compared to traditional reed switch designs. Fully Submersible and Leak-Proof: Constructed with high-quality ABS material and sealed using ultrasonic welding, the switch is both durable and fully submersible for tough marine environments. Mercury-Free and Eco-Friendly: Designed without mercury, ensuring safe operation for the environment while complying with international marine safety standards. High Current Capacity: Handles up to 18A at 12V, making it compatible with a wide range of bilge pumps and ideal for demanding marine applications. Easy Installation: The compact and user-friendly design allows for straightforward installation, reducing setup time and effort. Long-Life and High Switching Frequency: Built to withstand up to 10 million cycles, this switch ensures dependable performance for years of use. Ignition-Protected Construction: Meets ISO 8846 Marine standards, making it safe for installation in engine compartments or confined spaces. Specifications: Wire Load: 3 ft. Dimensions: 7.68" x 5.71" Weight: 0.29 lbs Specifications: Operation: Automatic Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 817683022942 Brochure (pdf)

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 40 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs UPC: 671880841894 Brochure (pdf)

Read more less

LoPro 900GPH Bilge Pump - AutomaticThe Rule LoPro™ 900 Automatic is a fully automatic low profile Bilge Pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4".It features a threaded discharge nozzle to which you can attach either a straight or a 90° fitting (included). In addition, you may use the tricuspid check valve (included) on the straight fitting to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose attached can also swivel 360° to route the hose perfectly. The pump features a sensing switch to control the pump. Unique to this pump are two settings, a high setting where the pump turns on when the water reaches 1-3/4" and a low setting where the pump turns on when the water reaches 1".Features: 900 GPH Low Profile Bilge Pump Fits into hard to reach places Fully Autuomatic- two settings available, high and low Threaded discharge ports with mulitiple fittings available Features a tricuspid check valve to minimize back flow of water 3 Year WarrantyWARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Automatic Gallons Per Minute: 15 GPM Gallons Per Hour: 900 GPH Type: Electric Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 042237114372 Brochure (pdf)

Read more less

1100 GPH Automatic AMP Sensor Bilge Pump - 12VThe B31-Series Automatic Bilge Pump offers unparalleled efficiency and reliability for marine applications. Designed with a compact, automatic operation, this high-performance pump eliminates the need for a separate float switch. With a flow rate of 1100 GPH and compatibility with both 12V and 24V systems, it is perfect for a wide range of vessels. Durable, marine-grade materials and advanced features ensure a long service life, while the quick-connect components make installation and maintenance a breeze. Whether you're upgrading or replacing a bilge pump, the B31-Series delivers powerful performance and unmatched convenience.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Automatic Operation: No float switch is required. The pump checks for water every 2.5 minutes and activates only when needed, conserving energy and ensuring optimal performance. High Flow Capacity: Capable of pumping 1100 GPH, this pump is ideal for quickly removing bilge water, even in challenging marine conditions. Durable Marine-Grade Materials: Built with a stainless-steel motor shaft, moisture-tight seals, and marine-grade, silicon-blocked wiring, it is designed to withstand harsh marine environments. Submersible and Ignition Protected: Fully submersible and meets or exceeds ISO 8846 and ISO 8849 standards for safe operation in explosive atmospheres. Built-In Check Valve: Prevents water backflow, ensuring that your bilge remains dry and efficient between pump cycles. Dual Outlet Compatibility: Includes fittings for 3/4 inch and 1-1/8 inch hoses, offering flexible compatibility with existing plumbing. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Weight: 1.03 lbs Flow Rate: 1100 GPH Volts: 12V Current: 4.0A Head: 12.0' (4.0m) Included Components: Dual-size straight fitting (3/4 inch and 1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 1100 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 3"H x 5"W x 5"L WT: 1.3 lbs UPC: 817683023017

Read more less

2000 GPH Automatic AMP Sensor Bilge Pump - 12VThe 2000 GPH Automatic Bilge Pump is designed for superior performance, durability, and convenience. With a high flow rate of 2000 GPH and innovative electronic sensing technology, this pump operates without the need for an external float switch. The advanced design checks for water every 2.5 minutes and activates only when necessary, ensuring efficient water removal. Its quick-connect system allows for easy maintenance and replacement, while robust construction ensures reliability in harsh marine environments. Whether you’re replacing or upgrading your bilge pump, the 2000 GPH model offers unmatched performance and ease of use.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Advanced Automatic Operation: Innovative electronic sensing technology activates the pump only when water is detected. The pump checks for water every 2.5 minutes, running for just 0.5 seconds to conserve energy. High-Performance Flow Rate: Capable of pumping up to 2000 GPH, this pump quickly clears bilge water, even in demanding marine conditions. Anti-Airlock Protection: Features a vented impeller housing that prevents airlock, ensuring consistent and reliable performance at all times. Durable Marine-Grade Construction: Built with a stainless-steel motor shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting performance in harsh environments. Dual Outlet Options: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, ensuring flexible compatibility with various installations. Built-In Check Valve: Prevents water backflow into the bilge, maintaining a dry environment and enhancing overall efficiency. Specifications: Weight: 1.71 lbs Flow rate: 2000 GPH (Gallons Per Hour) Volts: 12V Current: 7.5A Head: 18.04' (5.5m) Outlet Diameter: 1-1/8 inch (29mm) Included Components: Standard straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect plumbing and wiring Specifications: Gallons Per Hour: 2000 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 4"H x 6"W x 6"L WT: 2 lbs UPC: 817683023024 Brochure (pdf)

Read more less

12 GPM Macerator Pump - 12VThe Macerator Pump is engineered to tackle the toughest marine and RV waste management challenges. Featuring a powerful quad-blade chopping system and a triple-sealed motor, this pump is built to easily handle the emptying of holding tanks, fish boxes, and livewells. Its robust design includes anti-clog technology, ensuring consistent operation even with challenging debris.This pump delivers an impressive 12 GPM flow rate, allowing you to empty a 30-gallon tank in less than three minutes. With a self-priming suction up to 4 feet, the Macerator Pump guarantees reliable performance every time. Designed for durability, the pump's sealed motor is o-ring protected, thermally shielded, and powder-coated to resist both internal and external corrosion. The quick-connect wiring system simplifies installation and replacement, making this pump a dependable choice for marine and RV applications.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows the user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Quad-Blade Chopping Design: The advanced quad-blade system efficiently grinds waste, minimizing the risk of clogs and ensuring consistent operation even with demanding tasks. High Flow Rate: Delivers a powerful 12 GPM (45 LPM), making it ideal for quickly emptying holding tanks, livewells, and fish boxes in less than three minutes. Triple-Sealed Motor for Durability: Features o-ring sealed end bells, sealed bearings, and a powder-coated shell, protecting the motor from internal and external corrosion in harsh marine environments. Self-Priming to 4 Feet: The pump’s self-priming capability ensures reliable suction, making it suitable for varied installation heights and conditions. Anti-Clog Technology: Includes a rear anti-clog system and an easy-access knob for clearing blockages, ensuring smooth operation during waste disposal. Ignition Protected: Designed to meet ISO 8846 Marine standards, making it safe for use in engine compartments and other confined spaces. Quick-Connect Wiring: Simplifies installation and replacement, saving time and effort for users during maintenance or upgrades. Run-Dry Protection: Built-in thermal sensors allow the pump to run dry for short periods, preventing damage during priming or unexpected interruptions. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Voltage: 12V Open Flow Rate: 12 GPM (45 LPM) Ports: 1-1/2” MNPT Inlet, 1” Hose Barb Outlet Impeller Material: Rubber & Copper Max Draw: 12.0A (12V) / 6.0A (24V) Dimensions (L x W x H): 13.78" x 5.12" x 4.33" (35.0 x 13.0 x 11.0 cm) Included Components: Commodore DC Macerator Pump (12V) 1-1/2” MNPT Inlet Adapter 1” Hose Barb Outlet Adapter Quick-Connect Wiring System Specifications: Color: Black/White Gallons Per Minute: 12 Inlet Size: 1-1/2" Operation Method: Electric Outlet Size: 1" Type: Macerator Pumps Volts: 12 Box Dimensions: 4"H x 6"W x 13"L WT: 5.6 lbs UPC: 817683023116 Brochure (pdf)

Read more less

3.0 GPM Water Pump - 12VThe 3.0 GPM 12V Fresh & Raw Water Washdown Pump combines versatility, quiet operation, and robust performance for a wide range of water applications. With its 3-chamber diaphragm design, this positive displacement pump delivers up to 3.0 GPM of consistent flow and 45 PSI shut-off pressure, making it ideal for freshwater supply, washdowns, and other transfer needs. Capable of supplying up to 3 fixtures simultaneously, it self-primes up to 6 vertical feet and runs dry without damage, ensuring maximum durability in both freshwater and saltwater environments.Commodore’s ultra-quiet motor, paired with a completely rubber mounting base, absorbs vibration and reduces noise to levels no louder than a home air conditioner. This pump is easy to install, service, and winterize, thanks to its industry-standard mounting pattern and threaded connections. Backed by a 4-year warranty, it’s a dependable and quiet solution for boats, RVs, and water transfer systems.Features: Ultra-Quiet Operation: Designed with a low-noise motor and a rubber mounting base, this pump operates extremely quietly, reducing vibration and noise to near-silent levels – perfect for enclosed spaces. Self-Priming and Run-Dry Safe: The pump self-primes up to 6 feet vertically and can run dry without damage, ensuring durability and reliability during demanding tasks. Adjustable Pressure Switch: The built-in pressure switch allows for automatic operation, starting and stopping the pump when fixtures are opened and closed, with adjustable settings up to 45 PSI. Versatile Multi-Use Design: Perfect for freshwater supply, raw water washdown, livewell circulation, and water transfer applications, this pump can supply up to 3 fixtures simultaneously. Built-In Thermal Overload Protection: The motor features a thermal overload protection that automatically shuts off to prevent overheating, with an automatic restart feature. Durable and Saltwater Safe: Made with EPDM valves and a Santoprene diaphragm, this pump handles fresh and saltwater applications while ensuring long-lasting performance. Easy Installation and Maintenance: Includes industry-standard 1/2"-14 MNPT ports, a compact mounting base, and threaded connections for simple setup, servicing, and winterization. 4-Year Warranty: Backed by COMMODORE’s industry-leading 4-year warranty, offering reliable performance and peace of mind for years to come. Specifications: Voltage: 12V Open Flow Rate: 3.0 GPM (11.3 LPM) Shut-Off Pressure: 45 PSI (3.1 BAR) Priming Capabilities: 6 feet (1.8 meters) suction lift Max Draw: 6.74A Max Temperature: 140°F (60°C) Ports: 1/2"-14 MNPT Unit Weight: 4.23 lbs (1.92 kg) Included Components: Dual-size straight fitting and filter Quick-connect wiring for hassle-free setup Specifications: Gallons Per Minute: 3 Volts: 12 Box Dimensions: 5"H x 6"W x 10"L WT: 4.8 lbs UPC: 817683023093 Brochure (pdf)

Read more less

1100 GPH Vertical Livewell Pump - Short - 12VThe Short Vertical Livewell/Baitwell Pump is designed for professional and recreational anglers who demand high performance and reliability. With an impressive 1100 GPH flow rate, this pump delivers clean, oxygenated water to your livewell tank, keeping your catch fresh and healthy. Its 360° rotatable housing and discharge nozzle make installation flexible and customizable, while the quick-connect motor cartridge system ensures maintenance is quick and effortless.The innovative dual-port fitting allows for optional washdown pump integration, giving you added versatility for marine applications. Built with anti-airlock technology and advanced seals, this pump is designed to perform in challenging environments. The split quick-connect joint design eliminates the need to disconnect the base or plumbing during motor replacement, simplifying your workflow on the water.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. 360° Rotatable Pump Housing and Discharge Nozzle: Allows for precise positioning of the outlet, ensuring easy installation and optimal performance. Quick Motor Cartridge Removal: The push-button system lets you remove and replace the motor cartridge in seconds without disrupting the base or plumbing. Dual-Port Fitting for Washdown Pump: Designed with a dual-port fitting to integrate an optional washdown pump, providing added versatility for cleaning or rinsing. Anti-Airlock Technology: Hidden air vents prevent airlocks during operation, ensuring consistent and reliable water flow even in challenging plumbing setups. Durable and Long-Lasting Construction: Built with advanced seals and a long-life motor, the pump is designed to withstand harsh marine environments and heavy use. Threaded Discharge Fittings: Includes both straight and 90-degree elbow fittings for flexible installation options, catering to various system setups. Innovative Split Quick-Connect Design: Simplifies motor replacement by eliminating the need to disconnect plumbing or the pump base, saving time and effort. Certified and Safe: Meets CE, RoHS, ISO 8846, and ISO 8849 standards, ensuring compliance with global marine safety regulations. Specifications: Weight: 1.00 lbs Voltage: 12V Flow Rate: 1100 GPH Current: 4.0A Specifications: Gallons Per Hour: 1100 Inlet Style: Straight Outlet Size: 1-1/8" Volts: 12 Box Dimensions: 2"H x 8"W x 9"L WT: 1.2 lbs UPC: 817683023048 Brochure (pdf)

Read more less

1100 GPH Angled Livewell Pump - 12VThe Angled Livewell Pump delivers exceptional performance and reliability, making it an essential tool for serious anglers. With a powerful 1100 GPH flow rate, this pump ensures your livewell tank remains filled with clean, oxygenated water to keep your catch fresh. Its 360° rotatable housing and discharge nozzle provides unparalleled flexibility, making installation straightforward and adaptable to your unique setup.Designed with anti-airlock technology, the pump prevents air locking during operation, ensuring consistent performance. Maintenance is effortless thanks to the quick-connect motor cartridge removal system, which allows for motor replacement without disconnecting the base or plumbing. Built to meet CE, RoHS, ISO 8846, and ISO 8849 standards, this pump guarantees durability, reliability, and safety in any marine environment.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. 360° Rotatable Housing and Nozzle: The pump housing and discharge nozzle can rotate a full 360 degrees, allowing precise positioning for optimal installation. Quick Motor Cartridge Removal: Features a push-button mechanism for effortless motor replacement without disrupting plumbing or the pump base. Anti-Airlock Technology: Built with hidden air vents to prevent air locking in complex plumbing setups, ensuring continuous water flow. Dual-Port Fitting for Washdown Integration: Includes a dual-port fitting to support an optional washdown pump, adding versatility to your marine setup. Multiple Discharge Options: Comes with removable straight and elbow fittings, making it easy to adapt to different installation requirements. Certified and Safe: Complies with CE, RoHS, ISO 8846, and ISO 8849 standards, ensuring reliable performance and safety in marine environments. Long-Lasting and Durable: Built with advanced seals and a robust motor, this pump is designed for extended use in demanding conditions. Specifications: Weight: 1.21 lbs Voltage: 12V Current: 4.0A Flow Rate: 1100 GPH Specifications: Gallons Per Hour: 1100 Inlet Style: Straight Volts: 12 Box Dimensions: 2"H x 9"W x 9"L WT: 1.4 lbs UPC: 817683023055 Brochure (pdf)

Read more less

1100 GPH Vertical Livewell Pump - Long - 12VThe Vertical Livewell/Baitwell Pump is engineered to meet the needs of professional anglers, ensuring optimal water flow to keep your catch fresh and oxygenated. With an impressive 1100 GPH flow rate, this pump features a 360° rotatable housing and discharge nozzle, allowing for easy and customizable installation. Designed for durability and convenience, the pump includes anti-airlock technology and a dual-port fitting for optional washdown pump integration.Built with advanced seals and a long-life motor, the Livewell/Baitwell Pump offers reliability for extended use. The innovative split quick-connect joint design allows for seamless replacement of the motor cartridge without the need to disconnect the base or plumbing. Whether you’re a recreational angler or a professional, this pump provides the performance and versatility needed for marine applications.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. 360° Rotatable Pump Housing and Discharge Nozzle: Allows for precise positioning of the outlet, ensuring easy installation and optimal performance. Quick Motor Cartridge Removal: The push-button system lets you remove and replace the motor cartridge in seconds without disrupting the base or plumbing. Dual-Port Fitting for Washdown Pump: Designed with a dual-port fitting to integrate an optional washdown pump, providing added versatility for cleaning or rinsing. Anti-Airlock Technology: Hidden air vents prevent airlocks during operation, ensuring consistent and reliable water flow even in challenging plumbing setups. Durable and Long-Lasting Construction: Built with advanced seals and a long-life motor, the pump is designed to withstand harsh marine environments and heavy use. Threaded Discharge Fittings: Includes both straight and 90-degree elbow fittings for flexible installation options, catering to various system setups. Innovative Split Quick-Connect Design: Simplifies motor replacement by eliminating the need to disconnect plumbing or the pump base, saving time and effort. Certified and Safe: Meets CE, RoHS, ISO 8846, and ISO 8849 standards, ensuring compliance with global marine safety regulations. Specifications: Weight: 1.21 lbs Voltage: 12V Flow Rate: 1100 GPH Current: 4.0A

Read more less

2000 GPH Non-Automatic Bilge Pump - 24VThe 2000 GPH Non-Automatic Bilge Pump is engineered for superior performance, durability, and ease of maintenance. Designed for marine applications, this high-capacity pump operates via a separate float or panel switch, providing complete user control. Its advanced anti-airlock technology, moisture-tight seals, and stainless-steel motor shaft ensure consistent operation even in the harshest marine conditions.Featuring a quick-connect design, the pump, base, and wiring can be replaced in seconds without disrupting plumbing connections. The robust impeller design, combined with its high-efficiency motor, delivers exceptional water evacuation while operating quietly with low energy draw. Dual-size straight and 90-degree outlet fittings provide flexibility for a variety of installation setups.Whether you’re upgrading or maintaining your bilge system, the CM-A31-2000B ensures reliable and hassle-free performance, meeting the highest safety and marine standards.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Powerful Water Evacuation: Delivers a high flow rate of 2000 GPH, efficiently clearing large volumes of water to keep your bilge dry and safe in critical conditions. Non-Automatic Operation: Requires a separate float switch or manual panel switch, giving boat owners full control over when the pump activates. Anti-Airlock Technology: The advanced impeller design prevents airlocks, ensuring smooth and uninterrupted operation in any marine environment. Dual Outlet Compatibility: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, offering flexibility for various plumbing configurations. Marine-Grade Durability: Features a high-efficiency motor with a stainless-steel shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting reliability. Meets Safety Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safe marine operation. Quiet and Energy-Efficient Operation: The high-efficiency motor operates quietly with a low amp draw, minimizing power consumption without sacrificing performance. 4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring dependable operation and peace of mind for marine enthusiasts. Specifications: Voltage: 24V Flow Rate: 2000 GPH (Gallons Per Hour) Outlet Diameter: 1-1/8 inch (29mm) Current: 7.5A (12V) / 4.0A (24V) Head: 18.04 ft (5.5m) Unit Weight: 1.71 lbs (0.78 kg) Included Components: Dual-size straight fitting (1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 2000 Operation: Non-Automatic Outlet Size: 3/4" & 1-1/8" Volts: 24 Box Dimensions: 4"H x 6"W x 6"L WT: 1.9 lbs UPC: 817683023239 Brochure (pdf)

Read more less