Marine Plumbing & Ventilation

Amazon Warrior Manual Bilge PumpFeatures: Connections: - for 38mm (1½”) bore hose Dimensions: - 365mm long, 200mm wide, 260mm high, with 450mm handle Output: - up to 135 litres/minute (30 gallons/minute) Double diaphragm design for maximum efficiency and added safety: each side of the pump can work independently Stainless steel handle with bulkhead clips Self-priming up to 6m. Delivery head up to 6m. Mounts on deck, or through deck (optional kit & bracket) Packaged Dimensions: L:39.00 x H:31.00 x W:22.00cm Actual Weight: 4.82 Kg  (Approx. 5.32 Kg packed)

Read more less

Through Deck Kit for Manual Bilge PumpsFeatures:Actual Weight: 0.16 Kg  (Approx. 0.36 Kg packed)

Read more less

Discharge Port - 1-1/4"Features: 1-1/4" Discharge Port

Read more less

2-Way Waste Manifold 6' Cable 3/4" PortsThe 2-way manifold with Whale Intelligent Control built-in. The IC manifold can be used with a Whale Gulper pump to create a grey water disposal system. The manifold accepts two waste inputs and senses water through the wall. This relays information to the Gulper IC pump to turn on and pump the wastewater.

Read more less

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.Tank levels can be read out locally in the system, see screenshot, as well remotely through our VRM Portal.The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires are required.Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is power in the terminal together with fused outputs to facilitate that.Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example, 0 to 5 V.To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

0590 Angled Water Fill/VentFeatures: Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required Specifications: For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Paragon Senior 24V Water Pressure SystemFeatures: Made in the USA Max 11 GPM Operating pressure range 30-50 PSI For yachts over 50' in length Complies with NSF-61 low-lead standard Powerful 2-stage rotary pump DC and AC models are available Pressure gauge and inlet strainer included Patented NOFLOTM dry-run protection Use with PST-2, 3, 4, or 5 pressure storage tank (order separately)

Read more less

Clamping Ring Kit for Gulper 220Features: Includes both halves of the clamping ring and 2 screws Specifically for Whale Gulper 220 Shower/Waste Pump

Read more less

EnviroComfort 16,000 BTU Install Kit - 115VThe Installation Kit includes all air distribution and plumbing components that, when combined with the EDC16K-HV Retrofit Kit, comprise a completely new air conditioning system installation for treating one interior space.Legacy # 218000116Features: Small, compact, space-saving design Designed for New Installations of ECD6K Retrofit Kits In the Box: Speed scoop - 1/2" Ball valve - 1/2" NPT Seawater pump - PML 500 Seawater strainer w/bracket - 1/2" FPT 25" Seawater hose - 5/8" White Overboard discharge -5/8" 12.5' 6" R4.2 flexible insulated duct Supply air grille - 10" x 8" Return air grille - 14" x 10" Fittings/Hardware *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Service Kits Box Dimensions: 16"H x 17"W x 20"L WT: 25.4 lbs UPC: 713814198503

Read more less

Gusher 10 MK2/3 Service Kit NitrileFeatures: High-quality replacement Nitrile parts for popular Gusher 10 pumps Includes the pump’s diaphragm, valves, and circlips Production parts, so they will install and fit properly Replacement parts deliver the same outstanding performance as the original components For oil and diesel applications Durable, reliable direct replacements

Read more less

Garboard Drain Plug Cast BronzeAttwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.

Read more less

Mounting Bracket for Series 970 Portable Toilets Stainless Steel hold-down brackets/fasteners for Series 970 portable toilets.  Secures toilet to the floor.Mounting screws not included.*Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 7"W x 8"L WT: 0.3 lbs UPC: 713814067885

Read more less