Marine Plumbing & Ventilation

Heavy Duty RV Water Pump with Strainer - 12V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Inline Electric Galley Pump - 13LPM - 12VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse moulded parts and robust motors.We have developed our pump designs based on more than 60 years of expertise. Today we have used that experience to develop our most compact, quiet lightweight high performance electric impeller pumps. Fit in line to give your system a boost.Whale's high flow rate long life inine impeller pumps: Simple, compact and an economical solution Long life, very quiet with low power consumption An inexpensive way to enhance your water system on board Chose the pump to suit your freshwater needs on board from 2 flow options Lightweight design Ideal for pumping freshwater and saltwater Straight forward installation - fits unsupported into pipework Available in 12 and 24 V DC Models

Read more less

Replacement Cartridge for 500GPH - 12VAlbin Group's replacement cartridge for 500 GPH and 12V.

Read more less

Replacement Cartridge for 750 GPH - 12VAlbin Group's replacement cartridge for 750 GPH and 12V.

Read more less

Sahara MK2 S1200 Bilge Pump 1200 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market. Specifications: Volts: 24v Type: Pumps/Drives Gallons Per Hour: 1200 GPH Operation: Automatic Outlet Size: 1" or 1-1/8" Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs UPC: 022697023490 Owner's Manual (pdf)Brochure (pdf)

Read more less

Replacement Cartridge for 1100 GPH - 12VAlbin Group's replacement cartridge for 1100 GPH and 12V.

Read more less

Maxi Puppy 3000 12V Flexible Impeller PumpMaxi Puppy self-priming pump 12VDC. Ports ½” BSP threaded (use ¾” hose adapters), plus connections for 25mm (1”) bore hose.Features: Connections: - for 25mm (1”) bore hose or 1/2" BSP Dimensions: - 220mm long, 120mm wide, 85mm high Fuse Size: - 25(amp) Output: - up to 45 litres/minute (10 gallons/minute). High capacity, continuously rated bilge pump Self priming up to 2.4m vertical lift Simple, fully serviceable design with few wearing parts Can generate pressures up to 1 bar (15 psi) Bronze body, stainless steel shaft Packaged Dimensions: L:28.00 x H:13.00 x W:15.00cm Actual Weight: 3.85 Kg  (Approx. 4.35 Kg packed) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TastePURE Heated Drinking Water Hose - 25' - 5/8"IDThe core of the Camco TastePURE Heated Drinking Water Hose is made with an NSF 61 certified, drinking water safe hose that is BPA, phthalate and lead free. The TastsePURE Heated Drinking Water Hose won't leach harmful chemicals into your water or leave it tasting like plastic the way standard garden hoses do. It is ideal for RVs, livestock, agriculture, kennels and other industrial, commercial and residential uses. Its energy saving thermostat only heats as needed, saving you money on your electric bill. The fittings are heavy-duty machined and plated for maximum corrosion resistance and the durable exterior jacket protects water hose and electrical components from damage or exposure. CSA Low Lead Content Certified to NSF/ANSI 372. Compliant with all federal and state level Low Lead Laws. Includes female-to-male adapter to allow connection to the water supply on either end of hose, depending on the location of the electrical outlet. Durable exterior jacket protects water hose and electrical components from damage or exposure.Features: Heavy-duty machined and plated fittings for maximum corrosion resistance ID: 5/8 in. Length: 25 ft. Ideal for water line freeze protection down to minus 20°F (minus 28°C) with an energy saving thermostat Operates on 120VAC Made with NSF-61 certified drinking water safe hose

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 40 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs UPC: 671880841894 Brochure (pdf)

Read more less

Par-Max 1 Water Pressure Pump - 12V - 1 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 35 Gallons Per Minute: 1 GPM Box Dimensions: 2"H x 6"W x 6"L WT: 2.2 lbs UPC: 671880841757 Brochure (pdf)

Read more less

Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 25 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 25 Gallons Per Minute: 3 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.85 lbs UPC: 671880841788 Brochure (pdf)

Read more less

Par-Max HD3 Heavy Duty Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 3 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 6.95 lbs UPC: 671880841832 Brochure (pdf)

Read more less