Control Kit for Deluxe Flush & Lite Flush ToiletsFeatures:
Packaged Dimensions: L:10.00 x H:10.00 x W:10.00cm
Specifically for the Deluxe Flush and Lite Flush Toilets
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Filterless Waste Pump with Single Diaphragm - 24VFeatures:
Connections: - for 38mm (1½”) bore hose
Dimensions: - 278mm long, 161mm wide, 132mm high
Fuse Size: - 5 (amp)
Maximum Current: - 2.5(amps)
Output: - up to 19 liters/minute (4.2 gallons/minute). Max 4m discharge head
Handles sink, shower and black waste
1½” ports for good solids handling ability
Self-priming up to 3m (9.5ft) vertical lift
Multi-positional ports for easy mounting
Rated for up to 30 minutes continuous running
Mechanical parts shrouded for safety
Actual Weight: 3.02 kg (Approx. 3.52 kg packed)
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Waste Pumps
Box Dimensions: 6"H x 8"W x 14"L WT: 6.9 lbs
UPC: 671880581592
1100GPH Electronic Sensing Bilge Pump - 12VIn the next generation sensing bilge pumps, the 1100GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump:
Check valve included with hidden air vent to prevent airlocking
True electromagnetic suppression (EMC)
A built-in thermal cell that protects the pump and the vessel when things get too hot
These are the smallest automatic pumps available on the market!!!Features:
Completely automatic with manual override - No Float Switch Needed!
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Electric
Gallons Per Hour: 100 GPH
Operation: Automatic
Volts: 12v
Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs
UPC: 042237104809
1500 G.P.H. Automatic Bilge PumpHigh pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:
Computerized operation - no float switch required
3 wire version allows manual override or indicator light capability
Fully Submersible
Easy clean snap lock strainer
Silent and vibrationless operation
Anti-airlock protection
Compact, efficient long life motor
Ignition protected
No burn-out when run dry
Rust and Corrosion protection
Used by leading boatbuilders worldwide
marine grade blocked wiring
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1500 GPH
Operation: Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 7"H x 8"W x 11"L WT: 4.45 lbs
UPC: 042237084965
Owner's Manual (pdf)
Water Puppy (US)Features:
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps
Simple design means fewer wearing parts
ISO 8846 MARINE (Ignition protection)
ISO 8849 MARINE (Bilge pump standard)
Flow rate: 23.8 Litres/min (6.3 USgallons/min) Self-priming from dry up to 1.2m (4ft)
Body: Bronze
Impeller: Neoprene
Seal: Lip type
Voltage: 12 Vdc
Amp Draw: 8 amp
Fuse Size: 15 amp
Motor: Permanent magnet type, fully enclosed, stainless steel shaft. Adapter for 3/4" External Garden Hose Thread included
Weight: 4-1/2 lb WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 378 GPH
Gallons Per Minute: 6.3 GPM
Outlet Size: 1"
Volts: 12v
Type: Electric
Box Dimensions: 5"H x 6"W x 10"L WT: 5.85 lbs
UPC: 671880532112
Owner's Manual (pdf)
17820 Oil Changer SystemThe Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12v
Box Dimensions: 8"H x 12"W x 12"L WT: 10.95 lbs
UPC: 671880529624
Owner's Manual (pdf)
3/4" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - BlackTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.Features:149 series of hoses is extra flexible Application:Bilge and live well hoseSpecifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 3/4" / (mm) 19.1
Outer Diameter: (inch) .986" / (mm) 25
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 4.99
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure Specifications:
Length (Feet): 50'
ID Diameter (inches): 3/4"
Box Dimensions: 5"H x 18"W x 18"L WT: 9.4 lbs
UPC: 704917017822
Quick Guide (pdf)
0541 Vented Fill f/1-1/2" Hose - Straight Neck - Gas
Straight Neck
Chrome Plated Bronze Cap
Black Polymer Body
Stainless Steel Bead Chain
Integral Tank Vent with Flame Arrestor and Anti Surge Valve
Deck Plate Key and O-Ring Included
Technical Information
For Hose Size: 1-1/2"
For Vent Hose: 5/8"
O.D. Flange: 3-3/8"
Mounting Hole Dia.: 2-1/8"
Neck Length: 2-7/16"
Screw Size: #8
TastePURE Drinking Water Freshener - 16oz BottleCamco TastePURE Drinking Water Freshener helps to eliminate algae and slime from your drinking water tank. Just 1 ounce for every 20 gallons of water helps remove bad smells and tastes. Features:
Prevents algae and slime buildup from RV drinking water tanks
Just 1 oz. helps remove bad smells and taste from 20 gallons of water
Keeps stored fresh water tasting and odor free
16 oz. bottle
Easy to use
58541-1000 Pulley & Belt Kit Kit contains small and Large pulley, belt and clip.Compatible With:58500 Series Lite Flush Toilets*Sold as an Individual Specifications:
Type: Service Kits
Box Dimensions: 1"H x 4"W x 6"L WT: 0.5 lbs
UPC: 671880616874
Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:Diameter:2-1/4"Shaft Width:5/8"Shaft Diameter:2Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.