Marine Plumbing & Ventilation

58541-1000 Pulley & Belt Kit Kit contains small and Large pulley, belt and clip.Compatible With:58500 Series Lite Flush Toilets*Sold as an Individual  Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 6"L WT: 0.5 lbs UPC: 671880616874

Read more less

Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:Diameter:2-1/4"Shaft Width:5/8"Shaft Diameter:2Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Backing Block for 1-1/4" & 1-1/2" SeacocksFeatures: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure installation but is flexible enough to conform to minor hull curvature Will not swell or absorb moisture Made from an environmentally friendly PVC foam specially formulated for marine applications Specifications: Construction: Bronze Box Dimensions: 1"H x 7"W x 9"L WT: 0.25 lbs UPC: 742985170148

Read more less

Par-Max 2 Water Pressure Pump - 24V - 2 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 35 Gallons Per Minute: 2 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 4.5 lbs UPC: 671880841771 Brochure (pdf)

Read more less

Tsunami Mk2 T500 Aerator KitThis aerator kit is recommended for fishing boats with built-in livewells that are not equipped with a thru-hull recirculation system. The pump is sealed and can be occasionally submerged; however, the electrical wires must never be submerged.Kit Includes: Aerator spray head SS wire mesh strainer  Pump Straight outlet fitting  Hose  Two hose clamps Specifications: Pump Model: T500 Flow Gal/HR: 500 Amp Fuse: 3 Outlet Hose Inner Diameter: 3/4” (19mm) Two hose clamps Specifications: Gallons Per Hour: 500 Outlet Size: 3/4" Volts: 13.6v Box Dimensions: 5"H x 7"W x 9"L WT: 1.15 lbs UPC: 022697026019

Read more less

Amazon Universal Manual Bilge PumpFeatures: Connections: – for 38 mm (1½ “) bore hose Dimensions: – 240mm long, 210mm wide, 150mm high, with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 100 litres/minute (22 gallons/minute) Flow direction reversible by exchanging inlet and outlet ports Quick-release clamp ring for rapid disassembly Optional through-deck kit permits operation from inside or outside the cabin Push-fit inlet and outlet elbows (1 supplied with pump) increase flexibility of installation Stainless steel handle with bulkhead clips Self-priming up to 4m Packaged Dimensions: L:24.00 x H:16.00 x W:24.00cm Actual Weight: 1.36 Kg  (Approx. 1.86 Kg packed)

Read more less

1" Electro-Magnetic Clutch PumpFlow rate: Nominal 23 US Gallons/min at 1750 RPMSelf-priming from dry up to 7.8ftFeatures: Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear (this may affect performance - seek advice from your distributor). Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. APPLICATIONS MARINE:Engine cooling, Pumping bilges, Wash downs, Circulating water in bait tanks, Utility dockside pump.INDUSTRIAL:Circulating and transferring, Velocity mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc.FARMING:Pumping water for stock, Pumping water from shallow wells and cisterns.PUBLIC UTILITIES AND MUNICIPALITIES:Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations, and truck installation under hood for emergency pumping.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 23 GPM Volts: 12v Box Dimensions: 8"H x 9"W x 14"L WT: 16.15 lbs UPC: 671880007962 Owner's Manual (pdf)

Read more less

PH & PHII Universal Repair KitThese universal repair kits service all PH/PHII Raritan heads manufactured between 1960 and the present. It replaces kits PHRK, PHRKII, and PHRKIIC.In the Box: (2) 1201  (2) 1202 (1) 1203B1  (2) 1203B2  (1) 1203B3  (1) 1213A  (1) 1213B  (1) 1213C  (1) 1213D  (1) 1214 (1) 1214A  (1) 1214B  (4) 1226C (1) 1226CA  (1) 1232MS  (1) 1234 (1) 25103 (1) 25105  (1) C253  (4) RNI (3) SLICC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

WP008 Water Pump Repair Kit for Honda Outboard EnginesThis water pump repair kit is designed for specific Honda outboard engines.Fits:Honda BF175/200/225 Outboard EnginesReplaces: Honda Water Pump Repair Kit 06192-ZY3-000 SIERRA Water Pump Repair Kit 18-3285 EMP Water Pump Repair Kit 46-46620 Warranty InformationWhen properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

WP007 Water Pump Repair Kit for Suzuki Outboard EnginesThis water pump repair kit is designed for specific Suzuki outboard engines.Fits:Suzuki DF 60/70 (1998-07), DT90/100 (1989-01) Outboard EnginesReplaces: SUZUKI Water Pump Repair Kit 17400-87E04 SUZUKI Water Pump Repair Kit 17400-87E03 SUZUKI Water Pump Repair Kit 17400-87E02 SUZUKI Water Pump Repair Kit 17400-87E01 SUZUKI Water Pump Repair Kit 17400-87E00 SIERRA Water Pump Repair Kit 18-3254 EMP Water Pump Repair Kit 46-46418  Warranty InformationWhen properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

WP006 Water Pump Repair Kit for Suzuki Outboard EnginesThis water pump repair kit is designed for specific Suzuki outboard engines.Fits:Suzuki DF 90/115/140 (2001-06) Outboard EnginesReplaces: SUZUKI Water Pump Repair Kit 17400-90J20 SUZUKI Water Pump Repair Kit 17400-90J11 SUZUKI Water Pump Repair Kit 17400-90J10 SUZUKI Water Pump Repair Kit 17400-90J01 SUZUKI Water Pump Repair Kit 17400-90J00 JOHNSON / EVINRUDE OMC Water Pump Repair Kit 5033541 JOHNSON / EVINRUDE OMC Water Pump Repair Kit 0778241 JOHNSON / EVINRUDE OMC Water Pump Repair Kit 5033541 SIERRA Water Pump Repair Kit 18-3258 Warranty InformationWhen properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Brass Baitwell Plug - 3/4" Cam action nitrile rubber plug snaps shut to form a leak-proof seal for livewells and baitwells. Clockwise turn of the handle tightens the plug, brass lever snaps down to lock. Snap lock handle is adjustable to tighten plug size to fit most bait wells currently available.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less