Marine Safety - Accessories

Re-Arm Kit 24g - Automatic/Manual Inflatable life jackets can be reused after each inflation, but the CO2 cylinder needs to be replaced before using again.  Use an Onyx rearming kit to keep yours ready.  Compatible With: A/M 24 inflatable PFD's Onyx 24 gram inflatable PFD's In the Box: One (1) 24 gram CO2 cylinder - 1/2" thread One (1) Green indicator clip One (1) Yellow water soluble bobbin *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 1"H x 6"W x 8"L WT: 0.3 lbs UPC: 043311002295

Read more less

Conversion Plate for  CO Detectors - White Optional conversion plate for mounting CMD6-M Carbon Monoxide Alarms in places where larger CMD2-M, CMD3-M, CMD4-M or CMD5-M units were previously installed.  This cover plate covers up unsightly wear or openings from previous installations.Mounting hardware included.*Sold as an Individual  Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 7"L WT: 0.07 lbs UPC: 619749207641

Read more less

Signal Whistle - Orange *10-PackThe signal whistle's sound can travel further than a human voice and other noises even if the perceived level of volume is similar.  Using a whistle requires much less energy than yelling or other means of signaling for rescue in an emergency situation.Features: Same whistle that is included with many MTI models All-weather marine grade whistle Meets USCG requirements for a signal device No metal or moving parts to break or corrode Built-in clip and lanyard hole for tying cord to life jacket *Sold as a PackWARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 6"L WT: 0.5 lbs UPC: 762894036007

Read more less

Ring Buoy Throw Bag - 90' RopeThrowline to attach to ring buoy for safe deployment.Features: Includes storage bag with cinch strap Polypropylene floating rope Technical Specifications: Rope Material - Polypropylene Rope Length - 90' (27.4 M) Rope Size - .38" (.965 cm)  Tensile Strength - 1,900 lb (862 kg) Weight (including bag): 1.65lbs (750 g) *Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 7"W x 14"L WT: 1.7 lbs UPC: 062533025691

Read more less

Replacement Green Clips *6-PackReplacement Indicator Clips for Inflatable Life Jackets and Vests using Halkey-Roberts V90000 Inflators. Note: The clip does not constitute a complete rearming kit. Be sure to check your PFD components needed. Failure to properly rearm your PFD may result in malfunction. Features: For replacement Indicator Clips for Inflatable Life Jackets and Vests use Halkey-Roberts V87000 and V90000 Inflators Replacement component Includes 6 Indicator Clips CO2 Cartridges sold separately Color: Green

Read more less

HydroFix™ Hydrostatic Release Unit (HRU)The HydroFix™ Hydrostatic Release Unit (HRU) is a patented rod system that allows a beacon to be quickly and reliably released from a Category I bracket when submerged in water between  4.9' to 13.1' (1.5 to 4 M.)   Does not rely on a battery, blade or pyrotechnic device to release the beacon.  This advantage allows for a quick, seamless and reliable release in an emergency.*This is a date-stamped product and must be replaced every 2 years from the date of installation or 4 years from the date of manufacture.  Compatible With:ACR Sea Shelter,  Sea Shelter2 and Sea Shelter3 brackets Features: Easily replaceable 100% factory tested Technical Specifications: Dimensions -  2.5" x 3.4" x 2.0" (6.3 x 8.6 x 5.0 cm) Weight - 3.3oz (93.6 g) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 791659949016 Owner's Manual (pdf)Brochure (pdf)

Read more less

Manual Discharge Cable Kit - 10'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. Compatible With:MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systemsFeatures:  Easily routed with engine cables and electrical wiring  Various lengths for vessel specific installation  In the Box: Cable - 10' Mounting plate Pull handle Safety pin *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 2"H x 17"W x 18"L WT: 0.7 lbs UPC: 619749311164

Read more less

Re-Arm Kit L 24gThe Auto/Manual 24G Inflatable Re-Arm Kit contains everything necessary to re-arm the Mustang Survival MIT 100 Convertible A/M inflatable PFDs after deployment. The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis. Use only Mustang Survival re-arm kits. Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty. Re-Arm Kit Contains:  One 24-gram CO2 cylinder (threaded) One bobbin (used for automatic mode in A/M models only) One re-arming instruction manual *For model numbers: MD2030, MD2030CM, MD2040, MD2040CM

Read more less

Re-Arm Kit H 17g - Automatic/ManualThe only thing worse than premature inflation?  One that doesn’t inflate at all. Keep your inflatables ready to pop at any time with fresh cartridges on hand.  The Auto/Manual 16g Bayonet Inflatable Re-Arm Kit contains everything necessary to re-arm your Mustang Survival MIT 70 manual and automatic inflatable PFDs after deployment.  The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis. Use only Mustang Survival re-arm kits.  Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.  Compatible With: Mustang MIT 70 Manual Inflatable PFD Mustang MIT 70 Automatic Inflatable PFD Technical Specifications: Inflation - Automatic and Manual Grams - 17 In the Box: One (1) 17 gram CO2 cylinders and bayonet assembly  One (1) bobbin (used for automatic PFD models only)  Re-arming instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 10"L WT: 0.4 lbs UPC: 062533083301 Brochure (pdf)

Read more less

Re-Arm Kit E 33g - Automatic/Manual The 1F Automatic and 3F Manual Inflatable PFD Re-Arm Kit E, contains everything necessary to re-arm your inflatable after deployment.  The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.  Note - This re-arm kit replaces discontinued re-arm kits MA7202 and MA7203 Use only Mustang Survival re-arm kits.  Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.Compatible With:MD2051, MD2053, MD2981, MD2085, MD2087, MD2983, MD2951, MD2953, MD3051, MD3052, MD3053, MD3054, MD3071, MD3075, MD3081, MD3082, MD3083, MD3084, MD3085 and MD3087.Technical Specifications: Inflation - Automatic and Manual  Grams - 33 In the Box: One 33gram CO2 cylinder  One (1) bobbin (use only with automatic inflatables)  Re-arming instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 10"L WT: 0.6 lbs UPC: 062533122895 Brochure (pdf)

Read more less

30" Ring Buoy with Reflective Tape Mustang Survival's life ring buoys are designed for superior life expectancy in the harshest environments.Molded from high-impact linear, low-density polyethylene (LDPE), Mustang Survival's life rings are designed for superior life expectancy in the harshest environments.Mustang Survival's Ring Buoy is designed to be used onboard commercial vessels, offshore installations, and larger yachts.Certification: U.S.C.G. approved  Canadian Coast Guard approved BV/MED approved Technical Specifications: Size - 30" diameter  Weight - 5.5 lb (2.5 kg) *Sold as an IndividualWARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 30"W x 30"L WT: 7.4 lbs UPC: 062533141186

Read more less

Re-Arm Kit S2 38G Auto 1/2" ThreadsRe-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 1/2" threads, yellow Bobbin/Water Sensing Element, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.Features: For re-arming inflatable life vests Use with Auto/Manual Pull PFD devices Includes one 38-gram CO2 cylinder with 1/2" threads, Yellow Bobbin/Water Sensing Element, and Instructions UL Marine Classified CAUTION: This product can only be used one time.  Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to  and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

Read more less