Universal Safety Kill Switch The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Re-Arm Kit K 17gThis Re-Arm Kit K contains everything necessary to re-arm the MIT 70 (MD4041 and MD4042) after deployment.The Re-Arm Kit K Contains:
One 17-gram CO2 cylinder
One automatic inflator bobbin (use only with MIT 70 MD4042 automatic only)
Re-arming instruction manual
Re-Arm Kit for Manual Inflatable PFD'sThis re-arm kit fits Onyx manual inflatable life jackets and personal flotation devices including the M24 belt pack (3001) and M24 (3100). Kit Includes:
24 gram CO2 cylinder with 1/2" thread
Green indicator tab
CO Alarm Relay Control ModuleThe RCM5 is a Relay Control Module. It allows you to automatically deactivate devices based on the status of the connected Xintex detection device. The RCM5 uses a signal provided by the connected Xintex device to activate the internal relay. This allows you to shutdown generators or other devices automatically.Compatible With:Interconnect models onlyTechnical Specifications:
Material - Flame retardant ABS plastic
Dimensions (L x W x H) - 3.1" x 2.1" x 1.83" (7.6 x 5.2 x 4.6 cm)
Operating Voltage - 9 - 32V DC
*Sold as an Individual Owner's Manual (pdf)
MOB+ xBAND - BlueThe MOB+ xBAND is a highly durable marine-grade silicone wristband. This enables you to use the xFOB at your wrist, so it's always on and never intrusive. The xFOB fits perfectly inside the wristband.*xBAND™ works with the MOB+ xHUB and xFOB (both required and sold separately)Features:
xFOB fits inside the wristband
Comfortable fit and adjustable size
Unique and patented locking mechanism
Highly durable silicone rubber
Size - 5.3" to 8.5" (circumference)
Weight - 0.35 oz. (10 g)
*Sold as an Individual Specifications:
Type: Parts
Box Dimensions: 2"H x 4"W x 5"L WT: 0.2 lbs
UPC: 850022007422
Owner's Manual (pdf)
MOB+ xBAND - BlackThe MOB+ xBAND is a highly durable marine-grade silicone wristband. This enables you to use the xFOB at your wrist, so it's always on and never intrusive. The xFOB fits perfectly inside the wristband.*xBAND™ works with the MOB+ xHUB and xFOB (both required and sold separately)Features:
xFOB fits inside the wristband
Comfortable fit and adjustable size
Unique and patented locking mechanism
Highly durable silicone rubber
Size - 5.3" to 8.5" (circumference)
Weight - 0.35 oz. (10 g)
*Sold as an Individual Specifications:
Type: Parts
Box Dimensions: 2"H x 4"W x 5"L WT: 0.2 lbs
UPC: 850022007415
Owner's Manual (pdf)
Belt Pack Re-Arm Kit ZS 16GUnlike traditional life jackets, inflatable belt packs are worn around the waist and deployed when needed, making them a practical option for those who prioritize both safety and mobility on the water. Whether paddling on a serene lake or navigating ocean waves, having the right safety equipment is essential for a fun and enjoyable experience. Brochure (pdf)
Belt Pack Re-Arm Kit ZR 16G Manual 3/8" ThreadUnlike traditional life jackets, inflatable belt packs are worn around the waist and deployed when needed, making them a practical option for those who prioritize both safety and mobility on the water. Whether paddling on a serene lake or navigating ocean waves, having the right safety equipment is essential for a fun and enjoyable experience. Brochure (pdf)
Re-Arm Kit K 24G Auto 1/2" ThreadsRe-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with 1/2" threads, a Green Indicator Clip, a Yellow Bobbin/Water Sensing Element, and Instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.Features:
For re-arming inflatable life vests
Use with Auto/Manual Pull PFD devices
Includes one 24-gram CO2 cylinder with 1/2" threads, Green Indicator Clip, Yellow Bobbin/Water Sensing Element, and Instructions
UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Accessory Pocket - BlackThe MA6000 Accessory Pocket is designed to attach to the waist belt of all Mustang Survival Inflatable PFDs. It is ergonomically designed to provide you with easy access to your personal survival equipment or other items. All seams are finished with additional reinforcement and a 400-denier nylon outer shell. Wearing the Accessory Pocket voids the Canadian ULC approval for the PFD and in the United States, wearing the Accessory Pocket voids the US Coast Guard approval. Features:
Attaches to all inflatable PFD waist belts
Ergonomically designed stowage provides easy access to personal survival equipment
All seams are finished with additional reinforcement
Front pocket for quick access to items
Technical Specifications:
Material - 400 D Nylon
Color - Black
Dimensions (L x W x H) - 10" x 1" x 6"
Weight - .2 lb
*Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 1"H x 6"W x 9"L WT: 0.2 lbs
UPC: 062533072015
Re-Arm Kit D 24g - Automatic/Manual The Automatic/Manual 24G Bayonet Inflatable Re-Arm Kit contains everything necessary to re-arm your Mustang Survival MIT 100 manual and automatic inflatable PFDs after deployment. The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis. Use only Mustang Survival re-arm kits. Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.Compatible With:Mustang MIT 100, MD2014, MD2015, MD2016, MD201 and versions CM and T1. Technical Specifications:
Inflation - Automatic Manual
Grams - 24
In the Box:
One (1) 24 gram CO2 cylinders and bayonet assembly
One (1) bobbin (used for automatic PFD models only)
Re-arming instruction manual
*Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 1"H x 6"W x 8"L WT: 0.35 lbs
UPC: 062533083417
Brochure (pdf)
Sailing Leg Strap This leg strap set provides extra safety by preventing PFDs from riding up while in the water. Constructed with 1" / 1.5" webbing and compatible with most Mustang Survival inflatable PFDs, the Sailing Leg Strap snaps around your waist to provide a more secure fit.*PFD not included.Features:
This strap attaches to inflatable PFDs to create a more secure fit
Fits Mustang Survival PFDs with 1" or 1.5" webbing
Attaches to PFD waist belt webbing
Prevents the PFD from riding up
*Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs
UPC: 062533217331