Marine Safety - Fume Detectors

45-Series Combo Carbon Monoxide Propane Alarm Surface Mount - BlackHave a safe TRIP!Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms.Replace all Propane and CO alarms that are 5 years old or older.Install alarms listed for RV use.Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm.Features: Double-duty alarm - Detects both gas leaks and CO gas simultaneously Reliable - 12V power means no missing or dead batteries to replace Durable - Built for the extreme RV environment Approved - Meets RVIA/NFPA requirements End of Life Signal Specifications: Voltage - Input Range (Volts): 12v Generator Shutdown: No Fume Type: Carbon Monoxide Box Dimensions: 2"H x 8"W x 10"L WT: 0.4 lbs UPC: 715456457437

Read more less

CO Alarm 12/24V DC - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 4"L WT: 1 lbs UPC: 619749208822 Owner's Manual (pdf)Brochure (pdf)

Read more less

62 Series Carbon Monoxide Alarm - 12V - RV Surface Mount - BlackFeatures: White Mini Carbon Monoxide Alarm Surface Mount Space Saving - Compact design for RVs Designed for the Rugged RV Environment. Ideal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, and Truck & Folding Campers. Advanced Technology. The alarm Mute button silences the alarm while the RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain. Memory Scan™. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level is unless your detector has memory. Reliable - 12 Volt power means no missing or dead batteries to replace Micro Current Technology - Saves battery power Durable - Built for the extreme RV environment Approved - Meets RVIA/NFPA requirements Specifications: Conforms To ANSI / UL STD 2034* * Testing Laboratory: ETL/Intertek Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7 Volts Power Supply and Current Draw: 37 mA @ 12.0 VDC Operational Range: 12.0 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40°F to +158°F Case Size: 3.5″W x 2.5″H x 1.25″D – Mounting Bracket .25″D Owner's Manual (pdf)

Read more less

CO Alarm Internal Battery - BlackA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): N/A Box Dimensions: 2"H x 4"W x 5"L WT: 0.36 lbs UPC: 619749208563 Owner's Manual (pdf)Brochure (pdf)

Read more less

62 Series Carbon Monoxide Alarm - 12V - 62-542-Marine - Flush Mount - BlackMini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old!Features: Space Saving Compact design for boats Designed for the harsh marine environment No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Advanced Technology - Alarm Mute button silences alarm while boat is ventilated Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain Reliable - 12 Volt power means no missing or dead batteries to replace Memory Scan™ - Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory Micro Current Technology - Saves precious battery power in a boat 62-541-R-Marine and 62-542-R-Marine include normally closed relay Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems Listed to UL 2034 Marine Use and CSA 6.19-01 Specifications: Voltage - Input Range (Volts): 12v Generator Shutdown: No Fume Type: Carbon Monoxide Box Dimensions: 3"H x 8"W x 10"L WT: 0.4 lbs UPC: 715456625461 Owner's Manual (pdf)

Read more less

62 Series Carbon Monoxide Alarm w/Relay - 12V - 62-541-R-Marine - Surface Mount - BlackMini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old! The 62-542-R-Marine includes a normally closed relay. Used to turn on exhaust fans, remotes, horns, lights, signals or connect to alarm systems.Features: Space Saving Compact design for boats Surface Mount Designed for the harsh marine environment No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Advanced Technology - Alarm Mute button silences alarm while boat is ventilated Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain Reliable - 12 Volt power means no missing or dead batteries to replace Memory Scan™- Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory Micro Current Technology - Saves precious battery power in a boat62-541-R-Marine and 62-542-R-Marine include normally closed relay Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems Listed to UL 2034 Marine Use and CSA 6.19-01 Specifications: Fume Type: Carbon Monoxide Generator Shutdown: No Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 8"W x 10"L WT: 0.39 lbs UPC: 715456625485 Owner's Manual (pdf)

Read more less

Combo Carbon Monoxide Propane Alarm Surface Mount - WhiteHave a safe TRIP!Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms.Replace all Propane and CO alarms that are 5 years old or older.Install alarms listed for RV use.Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm.Features: Double-duty alarm - Detects both gas leaks and CO gas simultaneously Reliable - 12V power means no missing or dead batteries to replace Durable - Built for the extreme RV environment Approved - Meets RVIA/NFPA requirements End of Life Signal Specifications: Generator Shutdown: No Fume Type: Carbon Monoxide Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 8"W x 10"L WT: 0.45 lbs UPC: 715456357416

Read more less

Gas Vapor Alarm Fume, Fire, Bilge Water - Black Surface MountFeatures: Cost effective technology. Smart sensor block for improved performance. Thermal Sensor. Monitors for high heat and heat from fire. Flood Sensor. Monitors bilge for high water. Specifications: Voltage - Input Range (Volts): 12v Generator Shutdown: No Fume Type: Gasoline & Propane Box Dimensions: 4"H x 8"W x 10"L WT: 1.05 lbs UPC: 715456810102 Quick Guide (pdf)Brochure (pdf)

Read more less

30 Series 12V RV Propane Alarm - WhiteMeets requirements set by RVIA for LP Gas Alarms on RVs. Test/Reset Button - Mute alarm during ventilation. Tests all detector functions with 1 touch. No dangerous gas is required. The alarm is fully operational during the mute cycle and will re-alarm if hazardous conditions recur. Built for the extreme RV environment. UL listed for RVs and Unconditioned Areas.Specifications: Size: 6-3/8 in. W x 2-7/8 in. H x 1 in. D 1-year limited warranty Flush mount 12-Volt Color: White Specifications: Voltage - Input Range (Volts): 12V Box Dimensions: 2"H x 8"W x 11"L WT: 0.45 lbs UPC: 715456404301

Read more less

Two Zone Detection & Alarm Panel - 2-5/8" Display - 12/24V DCEach system consists of a monitor panel and up to 14 smoke or heat detectors and/or rate of rise heat detectors connected to each zone (sold separately.)Features: Visual and audible indications of a fire or fault Water resistant display Voltage and EMI protected Reverse polarity protected Specifications: Supply Voltage: 9-32V DC Zone Loop Voltage: 24V DC (regardless of input voltage) Minimum Alarm Current: 15mA Maximum Current Per Zone: 400mA Maximum Sensors Per Zone: 8 EOL Resistor: 5.6kΩ Potential Free Transistor Output (Fault, Alarm): 50V max Relay Output (Buzzer): 2A Owner's Manual (pdf)

Read more less

Optical Smoke Detector with BaseOptical smoke detectors have consistently been recognized as suitable detectors for general use. They are regarded as particularly suitable for smoldering fires and escape routes. This smoke detector is also designed to significantly reduce the incidence of false alarms through over-sensitivity to transient phenomena.Features: Recommended for use as general-purpose smoke detectors for early warning of fires in most areas Works well in black as well as in white smoke Compensation for slow changes in sensitivity Extra confirmation of smoke before an alarm signal is given Specifications: Sampling Frequency: Once every four seconds  Operating Voltage: 8.5 V dc to 33 V dc  Supply Wiring: Two wire supply, polarity sensitive  Power-up Time: < 20 seconds  Minimum ‘Detector Active’ Voltage: 6 V Minimum Holding Current: 8 mA  Minimum Voltage to Light Alarm LED: 5 V  Alarm Reset Time: One second  Alarm Indicator: Integral indicator with 360º visibility  Operating & Storage Temperature: -40ºC to +70ºC Humidity (no condensation or icing): 0% to 98% RH Operation: Optical Smoke Detectors work on the well-established light scatter principle The remarkable optical design of this Smoke Detector enables it to respond to a wide spectrum of fires The sensing chamber contains an optical sensor that measures back-scattered light as well as the more usual forward-scattered light  The detector is calibrated so that it is highly reliable in detecting fires but is much less likely to generate false alarms The stability of the detector-high reliability, low false alarm rate is further increased by the use of algorithms to decide when the detector should change to the alarm state  Removes the likelihood of a detector producing an alarm as a result of smoke from smoking materials or another non-fire source Specifications: Fume Type: Smoke Box Dimensions: 2"H x 5"W x 7"L WT: 0.35 lbs UPC: 619749321095

Read more less

62 Series RV Carbon Monoxide - White - Flush Mount - 12V with Trim RingFeatures: This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. NMMA Listed Component. Space Saving design works in harsh marine environments. Works in extreme temperatures. Only CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor. No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available. Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater. Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO. End of Life Signal alerts boater to replace the alarm after 5 years of service. Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory. The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain. Specifications: Conforms To ANSI / UL STD 2034* * Testing Laboratory: ETL/Intertek Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7 Volts Power Supply and Current Draw: 37 mA @ 13.8 VDC Operational Range: 13.8 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40°F to +158°F Case Size: 4.5″W x 3.25″H x 1.25″D Owner's Manual (pdf)

Read more less