Marine Safety - Fume Detectors

45-Series Combo Carbon Monoxide Propane Alarm Surface Mount - BlackHave a safe TRIP!Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms.Replace all Propane and CO alarms that are 5 years old or older.Install alarms listed for RV use.Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm.Features: Double-duty alarm - Detects both gas leaks and CO gas simultaneously Reliable - 12V power means no missing or dead batteries to replace Durable - Built for the extreme RV environment Approved - Meets RVIA/NFPA requirements End of Life Signal Specifications: Voltage - Input Range (Volts): 12v Generator Shutdown: No Fume Type: Carbon Monoxide Box Dimensions: 2"H x 8"W x 10"L WT: 0.4 lbs UPC: 715456457437

Read more less

30 Series 12V RV Propane Alarm - BlackMeets requirements set by RVIA for LP Gas Alarms on RVs. Test/Reset Button - Mute alarm during ventilation. Tests all detector functions with 1 touch. No dangerous gas is required. The alarm is fully operational during the mute cycle and will re-alarm if hazardous conditions recur. Built for the extreme RV environment. UL listed for RVs and Unconditioned Areas.Specifications: Size: 6-3/8 in. W x 2-7/8 in. H x 1 in. D 1-year limited warranty Flush mount 12-Volt Color: Black Specifications: Voltage - Input Range (Volts): 12V Box Dimensions: 2"H x 8"W x 10"L WT: 0.45 lbs UPC: 715456404332

Read more less

Fixed Heat Detector with BaseThe Fireboy-Xintex Heat Detector uses a single thermistor to sense the air temperature around the detector. This heat detector was designed to detect how fast the temperature is increasing.Features: 163°F Fixed Heat Detector Housing: White flame-retardant polycarbonate Terminals: Nickel-plated stainless steel Ideal in environments that are dirty or smoky Unaffected by wind or atmospheric pressure Remote test feature Specifications: Detection Principle: Measurement of heat using a thermistor Sampling Frequency: Once every four seconds Supply Voltage: 8.5 V dc to 33 V dc Supply Wiring: Two wire supply, polarity sensitive Power-up Time: < 20 seconds Minimum: ‘detector active’ voltage: 6 V Holding Voltage: 5 V - 33 V Minimum Holding Current: 8 mA  Minimum Voltage to Light Alarm LED: 5 V  Alarm Reset Voltage: < 1 V  Alarm Reset Time: One second  Alarm Indicator: Integral indicator with 360º visibility Operating & Storage Temperature: -40ºC to +70ºC Operation: Open-web casing that enables air to flow freely across a thermistor which measures the air temperature every two seconds  A microprocessor stores the temperatures and compares them with pre-set values to determine whether a fixed upper limit - the alarm level - has been reached Detectors the microprocessor uses algorithms to determine how fast the temperature is increasing

Read more less

Two Zone Detection & Alarm Panel - 2-5/8" Display - 12/24V DCEach system consists of a monitor panel and up to 14 smoke or heat detectors and/or rate of rise heat detectors connected to each zone (sold separately.)Features: Visual and audible indications of a fire or fault Water resistant display Voltage and EMI protected Reverse polarity protected Specifications: Supply Voltage: 9-32V DC Zone Loop Voltage: 24V DC (regardless of input voltage) Minimum Alarm Current: 15mA Maximum Current Per Zone: 400mA Maximum Sensors Per Zone: 8 EOL Resistor: 5.6kΩ Potential Free Transistor Output (Fault, Alarm): 50V max Relay Output (Buzzer): 2A Owner's Manual (pdf)

Read more less

CO Alarm Internal Battery - BlackA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): N/A Box Dimensions: 2"H x 4"W x 5"L WT: 0.35 lbs UPC: 619749208563 Owner's Manual (pdf)Brochure (pdf)

Read more less

Combo Carbon Monoxide Propane Alarm Surface Mount - WhiteHave a safe TRIP!Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms.Replace all Propane and CO alarms that are 5 years old or older.Install alarms listed for RV use.Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm.Features: Double-duty alarm - Detects both gas leaks and CO gas simultaneously Reliable - 12V power means no missing or dead batteries to replace Durable - Built for the extreme RV environment Approved - Meets RVIA/NFPA requirements End of Life Signal Specifications: Generator Shutdown: No Fume Type: Carbon Monoxide Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 8"W x 10"L WT: 0.45 lbs UPC: 715456357416

Read more less

SMI100RV Smoke Detector 9V Battery PoweredAn ideal pocket-sized reference book for comprehending maritime flags. This guide is both comprehensive and concise, encompassing: Early detection of smoke and fire emissions to avert personal injury with the SMI100RV Boat and RV Approved Battery-Operated Smoke Alarm, which is sanctioned for use in boats and recreational vehicles, adhering to the latest industry standards. The detector has a hinged cover for effortless battery replacements, while the tamper-resistant locking pin prevents premature battery removal.Features: Detect Smoke and Fire Emissions Early to Prevent Personal Injury With Model SMI100RV Compact Design: 5.58" Diameter x 1.99" Height Fast & Easy Installation 9V Battery Powered, No Wiring Required Low Battery Indicator Silence Feature Test Button Easily Accessible on the Cover of the Alarm Alarm Horn: 85 dB @ 10 ft Smoke Sensor: Ionization Listed to UL217 for RV Use Eighth Edition Complies with U.S. Coast Guard Sect. 28.325(b) Package Contents:  Smoke Alarm  9-Volt Battery Specifications: Blower Relay: No Fume Type: Smoke Generator Shutdown: No Voltage - Input Range (Volts): 9 Box Dimensions: 2"H x 6"W x 6"L WT: 0.6 lbs UPC: 619749321538

Read more less

CO Alarm Internal Battery - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): N/A Box Dimensions: 2"H x 4"W x 4"L WT: 1 lbs UPC: 619749208662 Owner's Manual (pdf)Brochure (pdf)

Read more less

CO Alarm 12/24V DC - BlackA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 619749208723 Owner's Manual (pdf)Brochure (pdf)

Read more less

CO Alarm 12/24V DC with Interconnect - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 619749208853 Owner's Manual (pdf)Brochure (pdf)

Read more less

Propane Fume Detector w/Automatic Shut-Off & Plastic Sensor - No Solenoid Valve - Black Bezel DisplayDetect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.Features/Specifications: 2-3/16" Round Black Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA Specifications: Blower Relay: No Fume Type: Propane Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 9-30v Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs UPC: 619749207443

Read more less

62 Series Carbon Monoxide Alarm w/Relay - 12V - 62-542-R-Marine - Flush Mount - BlackMini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old! The 62-542-R-Marine includes a normally closed relay. Used to turn on exhaust fans, remotes, horns, lights, signals or connect to alarm systems.Features: Space Saving Compact design for boats Flush Mount Designed for the harsh marine environment No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Advanced Technology - Alarm Mute button silences alarm while boat is ventilated Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain Reliable - 12 Volt power means no missing or dead batteries to replace Memory Scan™- Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory Micro Current Technology - Saves precious battery power in a boat62-541-R-Marine and 62-542-R-Marine include normally closed relay Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems Listed to UL 2034 Marine Use and CSA 6.19-01 Specifications: Fume Type: Carbon Monoxide Generator Shutdown: No Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 8"W x 10"L WT: 0.5 lbs UPC: 715456625492

Read more less