GA 38 GPS/GLONASS AntennaBuilt to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile waterproof housing and provides 3 easy mounting solutions: pole, surface or under-deck (for the underside of fiberglass decks).External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.In the Box
GA 38
Surface mounting bracket
Pole mounting bracket
Under-deck mounting bracket
Mounting hardware
Antenna cable (32 ft/10 m)
Installation instructions
General Specifications
Dimensions (DxH): 3 19/32" x 1 15/18" (91.6 mm x 49.5 mm)
Weight: 7.1 oz (201 g)
Temperature range: -22° F to 176° F (-30° C to 80° C)
Case material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Antennas
Box Dimensions: 7"H x 7"W x 7"L WT: 1.85 lbs
UPC: 753759008482
5' White VHF Antenna 3dB Lift & Lay Mount with 5M RG-58Premium quality, easy set up and quick lay down. The lift and lay mount makes it possible with an easy release. Indicated for fishing, trailering, coverage, and storage. The special paint with an anti-UV filter avoids the deterioration of the colouring and keeps the whip shining white.The vinyl plastic cap, navy blue, provides a quality, finished appearance to the antenna, and it’s extremely resistant to high temperatures. Now 100% WATERPROOF.Features:
Lift and lay mount supplied with the antenna
Anti–UV high gloss finish
100% WATERPROOF Antenna
Base Lift and Lay inclusa con nell’antenna
5 m coaxial cable RG 58 CU MIL
Specifications:
Frequency: 156-162 MHz
Impedance: 50 ohms
Electrical length: 1/2 λ
V.S.W.R.: < 1,5:1
Polarization: Vertical
Gain: 3 dB
Max power input: 50 W
DC ground: Yes
Whip material: Fiberglass
Coaxial cable: 5 m (16′) RG 58 CU MIL
Mounting: Lift and lay mount
Length: 1,5 (5′) m
Weight: 0,55 kilo
MLS-410 Fixed Mount Speaker - White Redesigned for clear, crisp, and audible reception, the Standard Horizon MLS-410 is setting the bar on external VHF speakers. Compact in size, this high-performance communications speaker matches the impedance and output requirements of most Standard Horizon transceivers. Compatible With:Standard Horizon fixed mount VHF radios/Transceiver Features:
Flush or bracket mounted
Compact size
Weather-resistant
Technical Specifications:
Speaker Cable Length - 6.5' (2 M)
Dimensions (Diameter) - 5"
Maximum Power - 10 Watts
Speaker Impedance - 4 Ohm
In the Box:
Speaker w/speaker wire
Mounting bracket
Instruction manual
*Sold as an Individual Specifications:
Type: Speakers
Box Dimensions: 5"H x 6"W x 6"L WT: 1.5 lbs
UPC: 788026177820
Owner's Manual (pdf)
532-VW-RS 16' White VHF f/RUPP Mounts10dB Gain** Designed to be used with RUPP Antenna Mounts **A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antenna's 16' VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations.Customers and installers love the 500 GOLD Series' easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable.16' VHF antennas require a side support 3' to 4' from the base of the antennaFeatures:
Pre-installed RUPP collar
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
10dB gain
Cable: Includes 20’ of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
Mount: Standard 1"–14 threaded base (RUPP support arm required)
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Antenna Band: VHF
Color: White
Construction: Fiberglass
Ferrule Type: Stainless Steel
Length (Inches): 190"
Box Dimensions: 3"H x 3"W x 95"L WT: 13.6 lbs
UPC: 839494004696
Brochure (pdf)
Shakespeare Style 5250 Skinny Mini3 ft. (0.91 M) VHF Marine Band 3dBEnd-fed 1/2-wave stainless steel whipThis compact, lightweight antenna is ideal for vessels where space is limited - bass boats and fishing vessels, for example. Its chrome plated brass canister minimizes de-tuning. Cable and PL-259 connector included.
Stainless steel whip
Sealed, tin-plated copper wire coil
Requires mount with center hole for passage of the supplied 15' RG-58 cable.
One section
Specifications:
Antenna Band: VHF
Color: Stainless
Construction: Stainless Steel
Ferrule Type: Stainless Steel
Length (Inches): 36"
Box Dimensions: 3"H x 3"W x 39"L WT: 2 lbs
UPC: 719441100797
Quick Guide (pdf)
Shakespeare Style 5206-N VHF Marine - Reduced Length Version8' LENGTH 6dBEND-FED WITH MATCHING STUBSame as the Style 5206-C, but the 5206-N has a nylon ferrule.An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor.
Quality copper cable elements for good range and efficiency
Nylon ferrule with standard 1"-14 thread
Includes 15' RG-58 cable and a PL-259 connector
Suggested mount: Shakespeare Style 495 Lift-n-Lay Mount or Style 4186 Ratchet Mount
Twin to: Shakespeare Styles 5205 and 5207 CB Marine antennas
One section
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
3 MHz
SWR:
1.5:1 @156.8 MHz
Impedance:
(Ohms): 50
Gain:
6 dB
Max Input (Watts):
50
DC Ground:
NO - the antenna will read "open circuit" when checked with an ohm meter or continuity tester.
Termination:
RG-58
Height (feet):
8
Polarization:
Vertical
Radiation pattern:
Omni-directional
Specifications:
Antenna Band: VHF
Color: White
Construction: Fiberglass
Ferrule Type: Nylon
Length (Inches): 96"
Box Dimensions: 3"H x 3"W x 95"L WT: 2.4 lbs
UPC: 719441100186
Quick Guide (pdf)
GT15M-IH Plastic, In-Hull, Mid-Band CHIRP Transducer - 85-165kHz, 600W, 8-PinGT15M-IH transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds.For installation, follow the included instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Temperature: No
Speed Included: No
Pins: 8
Mounting Style: In-Hull
Cable Length (Feet): 20'
Chirp: Medium
Imaging: Standard
Box Dimensions: 7"H x 7"W x 7"L WT: 1.77 lbs
UPC: 753759148577
GT24UHD-TM Ultra High-Definition Scanning Sonar All-In-One TransducerAll-In-One Transducer
One transducer provides the highest resolution ClearVü scanning sonar images available and amazingly clear high wide CHIRP traditional sonar
High wide CHIRP traditional sonar provides remarkably clear target separation and definition
See incredibly detailed images of fish and structure up to 200’ below your boat with 800 kHz ClearVü sonar
Easy-to-install, compact, all-in-one design includes transom and trolling motor mounts
Ultra-clear View of What’s BelowThe GT24 Ultra High-Definition all-in-one transducer provides image details so clear and precise, you can actually see fish hanging just off branches of submerged trees, brush and rocks. You can see the difference between bigger and smaller fish and even see individual fish swimming in bait balls. You get the highest resolution ClearVü scanning sonar images available plus amazingly clear high wide CHIRP traditional sonar1 — all in one transducer.Ultra PerformanceUltra High-Definition scanning sonar shows you incredibly detailed images of fish and structure up to 200’ below your boat with 800 kHz ClearVü scanning sonar. It’s easy to install with included transom and trolling motor mounts so you can start fishing faster.¹For use with GPSMAP® 8400xsv/8600xsv chartplotter/sonar combosWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Temperature: Yes
Speed Included: No
Pins: 8
Mounting Style: Transom
Imaging: Standard/Down
Cable Length (Feet): 20'
Box Dimensions: 2"H x 9"W x 9"L WT: 0.4 lbs
UPC: 753759225360
TD 50 Touchscreen DisplayAdd more access to a boat's systems’ monitoring and control. The TD 50 lets you easily connect with your boat's systems, sensors, and media for supplementary control, switching, and data monitoring from virtually any suitable mounting location on board.Features:
Sleek 5" edge-to-edge glass touchscreen display
Compatible with NMEA 2000®, EmpirBus™ and Garmin Marine networks
Minimal footprint (installs almost anywhere)
Matches the look of GPSMAP® series chartplotters
Easy plug-and-play network installation
Flat- or flush-mounting options
Control at Your FingertipsWherever you need some extra system access on board, the 5" TD 50 touchscreen fits the need. View engine and system data or adjust settings for lights, climate control, entertainment, security sensors, autopilots, and more.Scalable TechnologyThe easy-to-use and easy-to-install TD 50 touchscreen can work as an extra display at the helm station or for below-deck networked access to switching functions and data monitoring throughout your vessel.Easy System IntergrationFor integrated digital control on board, the TD 50 touchscreen display is compatible with NMEA 2000, third-party OneHelm™ systems, EmpirBus, and the Garmin Marine Network. System connectivity couldn't be simpler.Intuitive Interface Touchscreen control through an easy graphical interface lets you access multiple switching and monitoring functions for electrical components throughout your boat.Versatile Mounting OptionsThe TD 50 unit’s slimline design, minimal footprint, and flat- or flush-mounting options enable installation in virtually any onboard location where auxiliary system access is needed.Rugged, Durable Design Water-rated to IPX7 standards, the TD 50 touchscreen is built for harsh marine environments. The bright LCD screen offers crisp, clear daylight visibility, adjustable backlighting, and a wide viewing angle for excellent readability wherever it’s used on board.Specifications:
Dimensions Without Sun Vover (HxWxD): 4.1 x 4.5 x 2.0 in. / 10.5 x 14.0 x 5.1 cm
Dimensions With Sun Cover (HxWxD): 4.5 x 5.7 x 2.2 in. / 11.3 x 14.4 x 5.6 cm
Weight Without Sun Cover: 11.6 oz. (328 g)
Weight With Sun Cover: 13.2 oz. (375 g)
Temperature Range: 5° to 131° F (from -15° to 55° C)
Compass-Safe Distance: 7.9" (20 cm)
Case Material: Fully gasketed polycarbonate
Lens Material: Glass with an anti-glare and anti-fingerprint finish
Water Rating: IPX7
Brightness: 1200 cd/m2 (NIT)
Power Usage: 5.9 W max.
NMEA 2000® Input Voltage: 9 to 16 Vdc
NMEA 2000 LEN @ 9 Vdc: 13 (650 mA)
VMH 70 7" Sunlight Readable IPS TFT Touchscreen DisplayThe best-in-class VMH 70 display is designed to manage large amounts of complex data, and thanks to its real-time operating system it ensures full control of vital engine information immediately after power up.Easily configured to display information from up to four engines when connected to NMEA2000 or two engines via J1939 or analog inputs simultaneously, it has a large possible setting. This allows users to group similar items such as single or dual engines, battery performance, fuel, water, waste, tank level, rudder and trim, onboard systems, navigation, and weather if desired.The device has an integrated light sensor that adjusts for easy reading without eye strain, no matter how bright or dark the conditions and two camera inputs allow one to control the engine compartment during navigation and keep an eye on the main deck while maneuvering.The embedded NMEA 2000 gateway brings all the sensor readings and alarms to your external multi-functional display, saving the cost of an additional converter.Features:
Veratron VMH premium instruments series
7" sun-readable IPS TFT touchscreen display
Slim panel installation profile
Mineral glass front lens
Reliably operating in high-temperature environments
IPX7 protection rating (exposed device)
NMEA 2000 certified
Fully configurable analog inputs for direct sensor connections with NMEA 2000 gateway
Customizable startup screen
Dual SAE J1939 CAN ports
Easily customizable GUI screens
Technical Specifications:
Nominal Voltage - 12/24v
Operating Voltage - 9-32v
Housing - Aluminum case, mineral glass front lens
Mounting - Front panel mount via mounting kit
Connectors - 2x Molex MX-150, 12 pins, 1x DeviceNet M12, 5 pins (NMEA 2000), 2x TE SuperSeal 1.5, 3 pins (EasyLink), 1x M12, 4 pins (Video)
Compliance - CE, UKCA, Reach, RoHS
In the Box:
VMH 70 Display
Sun Cover
Panel mounting kit
Engine 1 power and data cable
Engine 2 data cable
EasyLink extension cable
*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Size: 7"
Gauge Type: Multifunction
Series: VMH
Voltage - Input Range (Volts): 12/24v
Box Dimensions: 4"H x 8"W x 12"L WT: 3 lbs
UPC: 7640190290084
Owner's Manual (pdf)Brochure (pdf)
Dual-Mode AM/FM CB RadioThe Uniden PC68LTXFM is a professional CB radio with dual-mode AM/FM capability for clearer, more versatile communication. It offers 40 FCC-authorized channels, an Active Noise Limiter, a HI-CUT filter, and adjustable RF/Mic Gain for crisp audio and reliable performance. A bright LED channel display and analog RF meter make operation simple, while the long microphone with gain control ensures easy, efficient use on the road. Built for truckers and CB enthusiasts, the PC68LTXFM combines trusted durability with modern upgrades.Features:
Dual Mode AM/FM - Switch between AM and FM modes for clearer, more versatile communication on all 40 CB channels.
40 Channel Operation - Enjoy the complete range of 40 CB radio channels to stay connected with those around you.
High-Cut Audio - Reduces high-frequency interference for cleaner reception.
RF Gain & Mic Gain - Fine-tune receiver sensitivity for better reception and adjust microphone sensitivity for full, clear modulation.
Analog Signal/RF Meter - Quickly monitor signal strength and transmission performance at a glance.
What's In The Box?
PC68LTXFM CB Radio
Microphone
DC Power Cord
Mounting Bracket
Mounting Hardware
MGV520B Marine Stereo w/AM/FM/BT/USB/Rear CameraThe Boss MGV520B marine stereo gives you impressive sound and marine-rated reliability. This all-weather digital media receiver features built-in Bluetooth, so you can stream your favorite tunes without taking your phone out of your pocket.This rugged receiver packs a lot of features into a compact design that fits into a standard gauge opening. Enjoy your favorite AM/FM radio stations, or plug a compatible device into the rear USB or AUX inputs. The 3-band EQ lets you optimize the sound for your tunes, the preamp outputs will come in handy when you add marine amps and subs to your system. Also included, a rear camera input.The color LED display with its IPX6-rated water-resistant face panel and big, easy-to-use controls are made to resist sun, salt, and moisture.Features:
Gauge-style digital media receiver
3" Multicolor screen
IPX6 water-resistance rating
Waterproof conformal-coated circuit boards
Rear Camera Input
Technical Specifications:
240 Watts peak power
Dimensions (H/W/D) - 3.55" x 3.55" x 3.25"
Chassis type - Gauge style
Presets - 18 FM/12 AM
In the Box:
MGV520B Stereo head unit
Mounting hardware
Owner's manual
*Sold as an Individual Specifications:
Auxiliary Input: Yes
Bluetooth: Yes
Color: Black
Cover Included: No
NMEA 2000: No
Power - Output (Watts): 240
RCA Input: Yes
RCA Output: Yes
SiriusXM Ready: No
Wired Remote Capable: No
Wireless Remote Capable: No
Box Dimensions: 5"H x 6"W x 10"L WT: 2.55 lbs
UPC: 791489130974
Owner's Manual (pdf)Brochure (pdf)