STRIKER™ 4 Portable Fishfinder Bundle with 77/200kHz Transducer3.5-inch CHIRP Fishfinder with GPS and Portable KitFeatures:
Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
Portable carrying case is perfect for kayak, canoe or ice fishing
Find fish; mark and return to hot spots, docks and ramps
Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak)
Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately)
STRIKER 4 fishfinder with portable carrying case is perfect for fishing from a kayak or canoe and is especially handy for ice fishing. Mark and return to your hot spots, boat ramps and docks. You also can share your favorite waypoints and routes with other STRIKER and echoMAP™ chartplotter combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Includes carrying case, rechargeable battery, CHIRP (77/200 kHz) transducer, tilt/swivel mount and transom and trolling motor mounting kit. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).Experience the Clarity of CHIRPSTRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below.Mark Spots with High-Sensitivity GPSUnlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.Navigate Easily with Waypoint MapSince the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp.Check Your Speed on ScreenYou can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.Fish Vertically with Built-in FlasherSTRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.Take Your Fishfinder AnywhereThe portable kit protects and carries your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.In The Box
STRIKER 4
Dual-beam transducer
Tilt/swivel mount
Portable bag
Base/handle
Suction cup mount
Foam float
Kayak In-hull Transducer Mount
Power cable
Rechargeable battery
AC charger
Documentation
ConnectionsTransducer pin numbers: 4 PinWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Screen Size: 3.5"
Transducer Type: Portable
Transducer Included: Yes
Box Dimensions: 4"H x 13"W x 20"L WT: 10.86 lbs
UPC: 753759147044
VHF Removable Fist Mic for RS40Simrad RS40 Remote Mountable Fist Mic. Can be connected to the front or rear of the radio, and an optional extension cable allows the radio and mic to be mounted in separate locations. Specifications:
Type: Microphones
Box Dimensions: 3"H x 4"W x 7"L WT: 0.6 lbs
UPC: 9420024177983
STRIKER™ 4 FishFinder with 4-Pin, 77/200kHz TM Transducer3.5-inch CHIRP Fishfinder with GPSFeatures:
Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
Find fish; mark and return to hot spots, docks and ramps
Convenient keypad operation
Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak)
Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately)
Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP™ combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).Experience the Clarity of CHIRPSTRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below.Mark Spots with High-Sensitivity GPSUnlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.Navigate Easily with Waypoint MapSince the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp.Check Your Speed on ScreenYou can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.Fish Vertically with Built-in FlasherSTRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.Take Your Fishfinder AnywhereA portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.In The Box
STRIKER 4
Dual-beam transducer
Transom and trolling motor mounts
Tilt/swivel mount
Power cable
Documentation
ConnectionsTransducer pin numbers: 4 PinWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Included Transducer: 010-10249-20
Screen Size: 3.5"
Transducer Type: Transom Mount
Transducer Included: Yes
Box Dimensions: 5"H x 7"W x 9"L WT: 2.36 lbs
UPC: 753759147013
SR200 InfoLINK SiriusXM Receiver for MFDsThe Raymarine SR200 InfoLINK receiver brings subscription-based SiriusXM Marine weather and satellite radio to your Raymarine LightHouse 3 multifunction displays. SiriusXM Marine is graphical weather and fishing information for boaters. Essential information like weather radar, NEXRAD storm cell tracking, tropical storm tracks, and localized forecasts are all easily viewable inside the LightHouse 3 chart application. Fishermen can enjoy expanded information including high-resolution coastal and offshore sea surface temperature overlays, also displayed on the live navigation chart. The SR200 InfoLINK receiver can also provide access to over 150 channels of SiriusXM Satellite Radio programming including commercial-free music, sports, talk, entertainment, politics, comedy, religion, news, and much more. The SR200 features an analog line output connection that you can easily connect to the auxiliary input on most marine stereo systems. SiriusXM channel selection presets and controls are accessed from Raymarine’s LightHouse 3 SiriusXM app.Super-compact and simple to install, the SR200 connects to the RayNet high-speed Ethernet network and seamlessly delivers content to all your multifunction displays. A low-profile Shakespeare SRA-50 SiriusXM Marine antenna kit is included. The antenna can be mounted on any horizontal surface with a clear view of the sky or pole mounted with the included threaded adapter. SiriusXM Marine service is available in the continental United States, southern Canada, and coastal waters. The SR200 InfoLINK receiver requires a valid activation and subscription to SiriusXM Marine Weather and/or SiriusXM Satellite radio, sold separately. Please visit www.siriusxm.com/marine for full details on features, packages, pricing, and the most up-to-date satellite coverage map.Features:
Delivers SiriusXM weather and audio content to Raymarine LightHouse 3 Multifunction Display Systems
Receive up-to-the-minute weather forecasts, alerts, weather radar, sea surface temperature charts, and more
Access 150+ channels of SiriusXM Satellite Radio
Compatible With:
Axiom
Axiom Pro
Axiom XL
**Requires LightHouse 3.9 or newer software**
Weather Subscription Options:SiriusXM Marine Weather - Marine Offshore and Coastal PackagesAudio Subscription Options:SiriusXM Channel Line-UpWhat’s in the Box?
SR200 InfoLINK SiriusXM Receiver
Shakespeare SRA-50 SiriusXM Antenna with pole and surface mounting kits
SRA-50 interconnect cable (25 feet)
SR200 InfoLINK to RayNet Interface cable (2 meters)
Analog stereo (L/R) line output cable (2 meters)
Power Cable (2 meters)
Mounting hardware
Installation guide and documentation kit
BlueChart® g3 Vision® HD - VUS010R - Southeast Florida - microSD™/SD™Coverage:Featuring data from Explorer Charts for the Bahamas. Vero Beach south to include Lake Okeechobee, Florida Keys, Dry Tortugas, and covering the west coast of Florida north to Naples. Also covered all the Bahamas, Andros Island, Eleuthera Island, Cat Island, Great Exuma Island, Little Exuma Island, and Hog Cay.Premier Coastal Navigation Charts
Provides industry-leading coverage, clarity and detail with updated coastal charts that feature integrated Garmin and Navionics® data
Auto Guidance¹ technology uses your desired depth and overhead clearance to calculate routes and show a suggested path to follow
High-resolution relief shading combines color and shadow to give you an easy-to-interpret, clearer view of bottom structure than contour lines alone
Depth Range Shading provides up to 10 depth ranges, enabling you to view your target depth at a glance
Up to 1’ contours provide a more accurate depiction of the bottom structure for improved fishing charts and navigation in swamps, canals and marinas
Experience unparalleled coverage and brilliant detail on the water. BlueChart g3 Vision coastal charts provide industry-leading coverage, clarity and detail with integrated Garmin and Navionics data, Auto Guidance technology and high-resolution relief shading..Auto Guidance TechnologyThe Auto Guidance feature¹ uses your desired depth and overhead clearance to calculate a route and a suggested path to follow.High-resolution Relief Shading FeatureHigh-resolution relief shading combines color and shadow to give you an easy-to-interpret, clearer view of bottom structure than contour lines alone.Up to 1’ ContoursThe closer the contour lines, the more accurate the depiction of the bottom structure for improved fishing charts and navigation in swamps, canals and marinas.NOAA Raster CartographyIf you prefer your display to have the look of paper charts, NOAA raster cartography2 is available as a free downloadable feature via the ActiveCaptain® app.Depth Range ShadingThis feature provides up to 10 depth ranges, enabling you to view your target depth at a glance.Shallow Water ShadingThis feature allows you to use shading to designate the shallow water depths you need to avoid.High-resolution Satellite ImageryThese detailed images of ports, marinas, bridges and navigational landmarks help provide you with superior situational awareness.Unique 3-D ViewsMarinerEye and FishEye views provide additional perspective both above and below the water line.¹Auto Guidance is for planning purposes only and does not replace safe navigation operations²Raster cartography cannot be viewed on echoMAP CHIRP and ECHOMAP Plus combos but can be viewed on mobile devices via the ActiveCaptain mobile appWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)
MSC 10 Marine Satellite CompassKNOW EXACTLY WHERE YOU'RE HEADEDGet reliable, accurate heading information with the easy-to-install GPS-based MSC 10 marine satellite compass.Features:
Accuracy comes easy when you’ve got a multi-band GNSS receiver on board.
Faster updates. More detailed tracking.
Rough waters got you worried? MSC 10 delivers pitch, roll, and heave info, too.
If other onboard systems need a heading sensor, we’ve got you covered.
MULTI-BAND GNSS AND MULTI-CONSTELLATIONThe multi-band GNSS (L1 and L5 GPS) and multi-constellation (GPS, Galileo1, GLONASS, and BeiDou1) receiver deliver precise positioning2.BOAT HEAVE AND MOREGet reliable, accurate boat heave, pitch, and roll information — even in rough waters.BUILT-IN ATTITUDE HEADING REFERENCE SYSTEM (AHRS)With a fully integrated attitude and heading reference system for better GPS heading at all speeds, including pitching in rough seas, taking sharp turns, or standing still.ACCURATE HEADING DATAMultiple receivers deliver heading accuracy within 2 degrees. Because it uses satellite signals, you don’t have to worry about magnetic interference.PRIMARY SENSOR ACROSS MULTIPLE SYSTEMSYou can use MSC 10 as the primary sensor for autopilots and other onboard systems that need accurate heading information.NMEA 2000® NETWORK COMPATIBLEGet heading, pitch, roll, and heave information delivered straight to your compatible Garmin chartplotter via the NMEA 2000 network.EASY TO INSTALLThis compact device is simple to install and easily integrates into your Garmin marine ecosystem.10 HZ UPDATE RATEGet better, more detailed tracking information, thanks to the 10 Hz position update rate.BACKUP HEADING SENSORIn the extremely rare case that you lose a satellite signal, MSC 10 will seamlessly transition from GPS-based to magnetometer-based heading3.What's In The Box?
MSC-10 Marine Satellite Compass
Pole mount
Mounting hardware
NMEA 2000® backbone/drop cable (6 meters)
NMEA 2000 T-connector
Documentation
1 Supported when available2 < 1 meter CEP, < 3 meters 95%3 Magnetometer calibration required for backup magnetic heading support
GRID™ 20 - VerticalSit Back and Take Control
Provides intuitive, easy-to-use remote access and control of your entire Garmin marine system
360-degree, all-in-one joystick with a rotary knob and push-to-select button
Enables easy chartplotter menu/setting navigation and fine control, even in the worst conditions
4 favorite keys can be designated to restore your system to a previously saved configuration
Allows wired (NMEA 2000) or wireless installation options
You don’t have to stand for hours at the helm. The easy-to-use GRID 20 remote input device provides intuitive remote access and control of your entire Garmin marine system. It features a 360-degree joystick with a rotary knob and push-to-select button for easy chartplotter menu/setting navigation and fine control, even in the worst conditions. You can designate 4 favorite keys to restore your system to a previously saved configuration. There are also a variety of hard keys for quick access to important functions, including left and right screen switches, autopilot standby/engage and more. For peace of mind, there’s also a dedicated SOS key. Wired or wireless installation and vertical or horizontal options allow for a plug-and-play solution that is tailored to your marine system. Its small footprint makes it convenient to integrate into a busy helm between displays — or even into the arm of the captain’s chair.In The Box:
GRID 20
Mounting hardware
Power cable
Documentation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
GC™ 245 Surface Mount Camera - BlackBRING VISION TO YOUR HELMNow there’s a high-resolution marine camera that takes the stress out of docking your boat. Enhance proximity awareness and confidence in close quarters with the GC 245 surface-mount camera.
Distance markers specific to your boat1 and user defined guidance lines
1080p high-resolution output2
See camera feeds in fisheye or standard view; birdseye view also available1
Full integration on the Garmin marine network or Garmin Bluenet™ network
Guidance LinesSet up your own guidance lines for more confidence avoiding obstacles in the marina.Distance MarkersUse distance markers calibrated to your vessel by the boatbuilder so you know how far away you are from objectsTwo Mounting OptionsInstallation is simple, and the camera can be mounted with the dome up or down.Three Camera ViewsGet the right perspective with FishEye and standard views with impressive low-light performance; GC 255 is also available with BirdsEye camera view1.Multiple Camera FeedsSee up to four camera feeds simultaneously on your compatible MFD; watch the video on networked chartplotters, or set it up on a custom combo page.See What You WantTake a closer look with digital zoom, or get a different perspective with digital pan.In The Box:
GC 245 surface mount camera
GVA 10 with integrated power and network cables
Network adapter cable (500 mm)
Video coaxial cable (8 m)
Mounting hardware
Documentation
Specifications:
Unit dimensions: 2.4” x 2.4” x 2.2” (6.1 x 6.1 x 5.1 cm)
Weight: 3.25 oz (92 g)
Hardwire power: 12V/24V
Operating current: 300 mA at 12VDC; 200 mA at 24VDC
Power consumption: 4.5 W
Connection to chartplotter: IP
Versatile mounting options: yes (ball-up or ball-down)
Rugged housing: yes
Setup: plug-and-play
Water rating: IPX7
Video resolution: 1920 x 1080 pixels2
Video output: H.264 over GMN and BlueNet™
Images: Standard and reverse
Selectable views: FishEye, standard, BirdsEye (OEM calibrated)
Augmented reality features: Distance markers (OEM calibrated) and guidance lines (user setup)
Viewing angle (H/V): 160°H/90°V
Operating temperature: -20°C to +60°C
Scanning system: progressive scan
Day/night operation: RGB mode full-time
1Professional calibration required21080p resolution available on select chartplotters onlyEngineering enhancements are ongoing and may not be reflected in the pictures, videos and specifications.
Airmar P319 200/50kHz Plastic Thru-hull Transducer (8-pin)010-10194-21This plastic thru-hull mount transducer performs well at high speeds.An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Do not use on wood hulls.When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Temperature: Yes
Speed Included: No
Pins: 8
Mounting Style: Thru-Hull
Imaging: Standard
Chirp: No
Cable Length (Feet): 39'
Box Dimensions: 4"H x 8"W x 10"L WT: 2.7 lbs
UPC: 753759971809
Owner's Manual (pdf)Brochure (pdf)
Garmin STRIKER™ 4 Fishfinder Worldwide Version with 77/200kHz - 4-Pin Transducer with Transom & Trolling Motor Mounts3.5-inch CHIRP Fishfinder with GPS
Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
Find fish; mark and return to hot spots, docks and rampsConvenient keypad operation
Includes CHIRP (77/200kHz) sonar transducer; transmit power (200W RMS)/(1,600W peak-to-peak)
Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately)
Multi-language capability
Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP_ combos. Smooth Scaling_ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).Experience the Clarity of CHIRPSTRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below.Mark Spots with High-sensitivity GPSUnlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.Navigate Easily with Waypoint MapSince the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp. Check Your Speed on ScreenCheck Your Speed on ScreenYou can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.Fish Vertically with Built-In FlasherSTRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.Take Your Fishfinder AnywhereA portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Screen Size: 3.5"
Transducer Type: Transom Mount
Transducer Included: Yes
Box Dimensions: 4"H x 7"W x 9"L WT: 2.5 lbs
UPC: 753759147020
Owner's Manual (pdf)
Dual Beam-IF Ice TransducerGet crystal-clear images of fish from your spot on the ice with the Dual Beam IF ice fishing transducer1. It offers remarkable target separation, an operating frequency of 77/200 kHZ and a beamwidth of 15 or 45 degrees — making it easier to see more. It features a silicone-coated cable that remains flexible in harsh winter conditions. The kit includes a 4-pin transducer adapter cable, foam float and grommet.
4' VHF/AIS White Antenna with 15' CableThe 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies.Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range.Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed).Features:
Designed for Digital AIS/VHF signals
4.5dBi Omni-directional gain
Rugged fiberglass rod with UV stable finish
Secure soldered connections
316 stainless steel base
1”x14 female threaded base
15’ premium low-loss RG-8X cable
Factory-installed mini-UHF connector
5-year warranty
Specifications:
Radiation: Pattern Omni-Directional
Gain: 4.5dBi
Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz)
Cable: 15’ Digital Antenna exclusive low loss RG-8X
Impedance: 50 ohms
Max Input Power: 50 watts
Exterior Finish: White polyurethane high gloss UV stable
Dimensions: 4’ length x 1” OD taper
Weight: 1.7 lbs
RF Connector: Mini-UHF female with included PL259 adapter
Installation: 1”x14tpi female threaded base
Elements: Brass - Hand soldered
Polarization: Vertical
Wind Rating: >160KPH
Operating Temp: 30º F to +175º F
Warranty: 5 Years
Compliance: Automatic Identification System (AIS)
Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations.Applications:
Commercial
Recreational
Government vessels where AIS is required
Specifications:
Color: White
Length (Inches): 48"
Box Dimensions: 2"H x 2"W x 50"L WT: 2.5 lbs
UPC: 839494001923