Search results for "dometic sealand t series waste discharge pump"

Heavy Duty Positive Displacement Vane Pump - 24V GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft.Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: None Max GPM: 6.5 Breaker DC: 15 Amp Specifications: Volts: 24v Reversible: No Gallons Per Minute: 6.5 GPM Box Dimensions: 5"H x 5"W x 10"L WT: 6.39 lbs UPC: 742985063662

Read more less

Quad Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Quad Pump 12VDC:Four motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases. Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.4 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 1.0 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 2.4 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higherThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Motor Group 12V for Silent Electric ToiletsJohnson Pump's 12V motor group (silent electric).

Read more less

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.Features Use for diesel, oil, water Length: 11-1/2" (28.4cm) Diameter: 1-1/4" (32mm) Lifts: 4 oz (.12 L) per stroke WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 2"H x 9"W x 14"L WT: 1 lbs UPC: 021083000299

Read more less

Deluxe Flush 17" Angled Back 12V Raw Water Electric Marine Toilet with Remote Rinse Pump & Soft Close LidYou can experience all the comforts of home at sea with Jabsco Deluxe Flush electric marine toilet. Designed for the discerning owner looking for luxury and comfort, the Deluxe Flush portfolio features a space-saving, stylish design with minimal water usage and virtually silent operation.Features: 17" Angled back Space-saving stylish design Household size soft closing seat Virtually silent operation Sea, river, or lake water rinse model Powerful non-clogging large bore flush pump macerates waste Specifications: Bowl Size: Domestic Lid: Soft close Rinse Type: Raw water Rinse Pump/Solenoid Valve: Remote Rinse Pump Voltage DC: 12V DC Recommended fuse Size (AMP): 25 Flush control Switch: 4-Button Touch Panel Height: (inch) 17.5” / (mm) 445 Width: (inch) 14.8” / (mm) 375 Depth: (inch) 17.7" / (mm) 450 Weight: (LBS) 66.1" / (kg) 30 One-Touch Control Pad:All Deluxe Flush marine toilets come complete with a multi-function, one-touch control pad. The control pad is supplied with a standard surface mount unit with a clean white bezel. The control pad offers four options: fill, quick flush, flush, or empty. In addition, the owner can set the control at any time so that the bowl is always left either dry or wet after flushing. The recommended dry setting minimizes total water usage. If water usage is not a concern, the wet setting automatically fills the bowl after flushing, ready for the next user. Simultaneously holding down both the quick flush and flush buttons for 5 seconds switches between bowl always left dry and bowl always left wet modes.Control Pad Options: Fill may be touched when the bowl is dry add 1 quart (1 liter) of water before use, if necessary Quick Flush first rinses and then empties the bowl after light use. On the dry setting, this uses less than 1 quart (1 liter) of water Flush rinses and empties the bowl twice after heavy use. If the bowl is dry, touching the fill before use is recommended. This uses just 2.5 quarts (2.5 liters) of water Empty does exactly what it says without adding any water, whenever desired. Even when the bowl appears to be dry, there is an anti-odor water lock in the pump housing Rinse Options: Supplied with a remote-mounted, self-priming pump to bring in sea, river, or lake rinse water  Complete with a Jabsco Pumpgard strainer Specifications: Color: White Operation Method: Electric Rinse Water: RAW Volts: 12 Box Dimensions: 23"H x 23"W x 25"L WT: 46 lbs UPC: 671880639972 Owner's Manual (pdf)

Read more less

WaterBuster® Portable PumpPart #: 4140-4This patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electrical system.Features: 6-3/8" high x 5-1/4" Pumps up to 200 gallons per hour Includes 42" hose with garden-hose adapter for adding longer hose Lifts water to height of 40 Note: Not to be used as a permanent bilge pump. Specifications: Gallons Per Hour: 200 GPH Type: Electric Box Dimensions: 5"H x 5"W x 7"L WT: 2.25 lbs UPC: 022697414045 Quick Guide (pdf)

Read more less

Ballast King Bronze DC Pump with Reversing Switch - 15 GPMWakeboard and Ski Boat Ballast PumpFeatures: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). Applications:The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. Specifications: Body Materials: Bronze Impeller: Jabsco Neoprene compound Seal: Lip Type Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb  Voltage: 12 (Vdc) Amp Draw: 19 (amp) Fuse Size: 25 (amp) Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible  Duty Cycle: 30 Minutes Max Dimensions: 3 5/8 x 8 x 4 3/4 (inches) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 15 GPM Volts: 12v Box Dimensions: 6"H x 6"W x 12"L WT: 8.6 lbs UPC: 671880628846 Brochure (pdf)

Read more less

Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features: Replaces worn out flapper scuppers 70% more drainage than competitive models Twist off for easy cleaning Retrofits all hole patterns The seal is slotted to fit over 1-1/4" motor well tubes 3” Diameter x 2-1/2” H The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it.  They will be different for every boat depending on the hull thickness but you will need a flat head screw.  Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.

Read more less

Supersub 12V 650GPH Low Profile Automatic Bilge PumpThe narrow low profile compact bilge pump range.Supersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features Low narrow design for confined bilge spaces Easy installation - outlet and pump body rotate to suit your installation High performance - Flow up to 1100 US gals per hour Efficient operation - Very low power consumption Easy to clean- snap fit assembly Low profile strainer - Leaves the bilge almost dry WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 650 GPH Operation: Automatic Outlet Size: 3/4" or 1" Volts: 12v Type: Electric Box Dimensions: 3"H x 7"W x 12"L WT: 1 lbs UPC: 766478943255

Read more less

Dual Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina! Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical).  Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.   An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.BBD Dual Pump 12VDC:Two motors/diaphragm pumps10 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup.  BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 0.73 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.50 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L  Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 2.0 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

500GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 500GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104717 Brochure (pdf)

Read more less

1000 Bilge Pump - 12 VDC, 1000 GPHQuality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.Features: 3' Tinned Wire Assembly Anti-Airlock Tough Nylon Housing Ignition Protected Water Cooled Motors - Extended Life 3 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Hour: 1000 GPH Type: Electric Box Dimensions: 4"H x 6"W x 9"L WT: 1.06 lbs UPC: 752324010103

Read more less