Search results for "dometic sealand t series waste discharge pump"

Talulah Ballast Pump - 13.5 GPM - 12VFeatures: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO 10133) Recommend fresh batteries and engine running (alternator running) to ensure power supply *Dry Run

Read more less

Single Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device-enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device-enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  A choice of four pump configurations in 12vdc or 24vdc for optimal water removal.  Pump diaphragm design can run dry for extended periods of time without damage.  A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch. An environmentally friendly, low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity.  Newly designed, ruggedized, single pump, which includes: An anodized aluminum enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. Four hard points for mounting in extreme conditions. Reduced size for easy installation in tight compartments. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Single Pump 12VDC: One motor/diaphragm pump 10 feet of input tubing provided (for pickup) 6 feet of output tubing provided (for discharge) Input tubing diameter (PVC or PU) - 1/4” OD  Output tubing diameter (PVC or PU)-3/8” OD Included with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup.  BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 0.35 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.25 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 2.25 H x 4 W x 5.25 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 57.15 H x 101.6 W x 133.35 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 1.6 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higherThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Talulah High Flow Ballast Pump - 30 GPM - 12VWith an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.Features: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO 10133) Recommend fresh batteries and engine running (alternator running) to ensure power supply *Dry Run

Read more less

High Flow Livewell 2000 Pump - 12 VDC, 2000 GPHHeavy duty and built to last. SHURFLO 2000 GPH livewell pump is built to withstand the harsh marine environment. Submersible and rated for continuous duty, SHURFLO's bilge pump is equipped with an anti-airlock feature to ensure optimal performance and is constructed with a high density nylon housing. Engineered with the finest components that continue to improve SHURFLO's high quality standard, the SHURFLO bilge pumps' performance and product reliability are unmatched.Features: Tough Nylon Construction Patented Water Cooled Motor Extended Motor Life 6' Tinned Wire Washdown Port Submersible Anti-Airlock ISO 8846/8849 2 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Hour: 2000 GPH Box Dimensions: 6"H x 7"W x 10"L WT: 5.6 lbs UPC: 752324010646

Read more less

Low Pressure Cyclone Centrifugal Pump - 24VSilent running. Single tool servicing. 2m (6 foot) suction lift when wet.A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 4.5 Amp Fuse Size: 7 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 29.7 GPM Max PSI: 8.7 Volts: 24v Box Dimensions: 5"H x 6"W x 12"L WT: 7.2 lbs UPC: 671880579384 Owner's Manual (pdf)

Read more less

Bronze AC Motor Pump UnitFlow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 7.8ftFeatures: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance - seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow. APPLICATIONSMARINE:Bait tank circulation, transfer oil, wash down, and utility dock pumps.INDUSTRIAL:Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.FOOD, BEVERAGE, & DAIRY:Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.HOME:Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.PLUMBING:Empty clogged sumps, drains, sinks and tubs, and pump out water closets.FARM:Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.CONTRACTORS:Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9.6 GPM Max PSI: 17.3 Volts: 115v Box Dimensions: 10"H x 11"W x 11"L WT: 22.45 lbs UPC: 671880007573 Owner's Manual (pdf)

Read more less

Deluxe Flush Electric Toilet with Solenoid Valve - Fresh Water PumpFeatures: Inlet 3/4" Hose Barb Soft close seat safety and quiet High-capacity bowl discharge pump makes toilet flushing quieter Outlet 1-1/2" Hose Barb Easy-to-clean ceramic bowl All plumbing and wiring are easily concealed Specifications: Voltage: 12V Max Draw: 20A Port: Inlet 3/4" Hose Barb, Outlet 1-1/2" Hose Barb Materials: Ceramic bowl, Soft close seat Features: Built-in macerator Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: Fresh Type: Toilet Volts: 12 Box Dimensions: 18"H x 20"W x 23"L WT: 63.85 lbs UPC: 817683023468

Read more less

Gulper Service Kit - Diaphragm & ValvesDiaphragm and valves for pump designed to manage unmacerated toilet waste.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 6"W x 9"L WT: 0.28 lbs UPC: 766478155702

Read more less

Drill Pump - 200 GPHIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.Features: 1/4" [6mm] Drill Shaft Flexible BUNA Impeller 8' [2.4m] Prime Uses: Oil Change and Liquid Transfers/LI> This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Par-Max HD6 Heavy Duty Water Pressure Pump - 12V - 6 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 9 lbs UPC: 671880841979 Brochure (pdf)

Read more less

4 Gallon Salt Feed Tank with 12V PumpThe Four Gallon Salt Feed System with Pump is designed for boats that operate in fresh or brackish water and can only be used with the Lectra/San® MC™ or electro-scan™ Type I MSDs. The unit’s Control Panel monitors salinity and salt solution will automatically be added to the MSD when needed. Pressurized freshwater is required—a minimum of 15 psi (103 kPa) working pressure.The simple and basic operation of the system is as follows: the system needs salt water to operate properly and salt can be added when not in full seawater conditions. When the system is activated the electrical charge applied to the patented plates generates the disinfectant to kill viruses and bacteria. As that disinfectant is generated the high-speed macerator breaks apart the waste allowing greater contact between waste and disinfectant.  If your toilet uses freshwater we recommend considering the Purasan. Specifications: Type: Holding Tanks Box Dimensions: 11"H x 11"W x 18"L WT: 6.3 lbs UPC: 085462044687

Read more less

Proline Bilge Pump500 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):33 L/M - 525 GPH Capacity Straight (13.6V): 40 L/M - 630 GPHAmperage:2.5AFuze Size:5AConnection:3/4" Specifications: Gallons Per Hour: 500 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 7"L WT: 0.85 lbs UPC: 729321225021

Read more less