Products

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M CableAirmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Available in fixed 0°, 12°, or 20° tilt, the DT800 is perfect for power and sailboat applications. It is sold with a choice of rugged housings— plastic, bronze, or stainless steel—to accommodate any vessel type or hull material. These low-profile housings do not affect hull performance and will provide accurate readings at high speeds.Airmar's Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning.Smart™ Sensor Features Broadband ceramic available with 0°, 12° and 20° tilt options Enhanced depth performance Maximum Depth Range: 180M (594’) Minimum range 0.5M (1.6’) Urethane face provides better sensitivity Excellent high-speed performance Fixed 12° tilt for 8° to 15° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25”) 6M(19.8”) NMEA 2000® devicenet cable and connector 51mm (2”) housing Blanking plug included Accommodates maximum hull thicknesses 54 mm (2 1/8”) Accommodates minimum hull thicknesses 6.3 mm (0.25”) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: 10-Pin For Furuno 10-Pin equipment Specifications: Type: Adapters Box Dimensions: 2"H x 7"W x 7"L WT: 1.2 lbs UPC: 801769003611

Read more less

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 6"L WT: 0.23 lbs UPC: 801769002720

Read more less

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 801769003239

Read more less

Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs UPC: 801769003215

Read more less

Humminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 14-Pin Specifically for Humminbird This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 5"W x 5"L WT: 0.2 lbs UPC: 801769003284

Read more less

Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Humminbird.Features: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 801769003277

Read more less

Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers - 9mMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: 600W For Raymarine 600W equipment Specifications: Type: Adapters Box Dimensions: 2"H x 8"W x 8"L WT: 1.31 lbs UPC: 801769003734

Read more less

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.Note that 600W Mix and Match cables cannot be used with 1kw transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 8"W x 8"L WT: 1.25 lbs UPC: 801769003048

Read more less