Products

Humminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 14-Pin Specifically for Humminbird This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 5"W x 5"L WT: 0.2 lbs UPC: 801769003284

Read more less

Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Humminbird.Features: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 801769003277

Read more less

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: 600W For Raymarine 600W equipment Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 1.35 lbs UPC: 801769003734

Read more less

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.Note that 600W Mix and Match cables cannot be used with 1kw transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 7"L WT: 1 lbs UPC: 801769003048

Read more less

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: Connector: 9-pin, Depth only Fits: HDS Carbon, evo 3 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 8"W x 8"L WT: 1.3 lbs UPC: 801769003321

Read more less

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications: Sensor Connector: MM Display Connector: HB Mix and Match Series: 5-Pin 600 Watt Country of Origin: USA Cable-Length: 9 m (30') Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 8"L WT: 0.4 lbs UPC: 801769003772

Read more less

MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 9-pin male connector. The adapter cables have a matching Airmar 9-pin female connector at one end and the correct connector for a specific brand of electronics at the other end.Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.Note: 1kW Mix and Match cables cannot be used with 600W transducers or CHIRP transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 9"L WT: 0.35 lbs UPC: 801769003352

Read more less

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Single Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 8"L WT: 0.1 lbs UPC: 801769003345

Read more less

P319 Plastic Thru Hull Depth & Temperature Transducer - 600W- 50/200kHz - Requires Mix & Match™ CableAirmar’s entry-level P319 features a single, 50/200 kHz, dual-frequency, ceramic element in a low-profile, plastic housing. The nearly flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.Features: Requires Mix & Match™ Cable for the Fishfinder Unit Cable Length 2M Deadrise Range: Best performance through 7°. Can accommodate up to 12°. Hole Size: 51 mm (2") Usable Shaft Length: 63.5 mm (2.50") Depth only or depth and fast-response water-temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 366 m (1200') 200 kHz with a 12° beamwidth for depth performance to 213 m (700') Right-angle cable exit saves space and protects the transducer if stepped on An included rubber washer allows tightening of the hull nut to irregular hull surfaces Low-profile housing has minimum drag Plastic housing is ABYC H-27 compliant Specifications: Cable Length (Feet): 3' Chirp: No Imaging: Standard Mounting Style: Thru-Hull Pins: 5 Speed Included: No Temperature: Yes Box Dimensions: 4"H x 6"W x 8"L WT: 1.8 lbs

Read more less