Type A - White Metal Base Bulb - 24V - 4-PackFeatures:
Voltage - 24V
Watts - 3W
Size - 9/32" (7mm)
Color - White/Clear
*Sold as a 4 PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: White
Box Dimensions: 1"H x 2"W x 2"L WT: 0.15 lbs
UPC: 754059005812
Dual Station Floating Ground - 400 PSI 1/8-27NPTFeatures:Ground - Floating
Connection - Knurled Nut
Voltage - 6 - 24V
Thread - 1/8-27 NPTF
Max. Pressure Range - 400 PSI / 25.58 Bar
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Silver
Box Dimensions: 2"H x 2"W x 5"L WT: 0.35 lbs
UPC: 754059005065
Heavy Duty Normally Open–Single Circuit 4 PSI Pressure Switch Features:
Ground - Floating
Connection - # 8-32
Voltage - 6-24V
Circuit - Normally Open - Single
Contacts - Silver Alloy
Max. Pressure Range - 4 PSI
Terminals - 2
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Silver
Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs
UPC: 754059008110
Temp Sender 3/8" NPTF America Single StandardFeatures:
3/8 NPT
100/250 oF - 460/29.5 ohms
Single wire
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Deep-Pipe Level Sender - 300mm - 90 to 4 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 300 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 90–4 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Color: Silver
Box Dimensions: 4"H x 4"W x 17"L WT: 1.2 lbs
UPC: 7640178726437
Type E Plastic Bulb SocketFeatures:
Material - Plastic
Class - Type E
Connection - Spade
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Black
Box Dimensions: 1"H x 5"W x 7"L WT: 0.5 lbs
UPC: 754059017082
Reed Switch Fuel Sender - 450 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh. The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 17.7" (450mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Silver
Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs
UPC: 754059064451
Reed Switch Fuel Sender - 350 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh. The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 13.8" (350mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Silver
Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs
UPC: 754059064437
Pressure Sender 150 PSI - 1/8-27 NPT Features:
Ground - Standard
Connection - Knurled Nut
Voltage - 6-24V
Thread - 1/8-27 NPTF
Component Reference No. - 29/12
Max. Pressure - 150 PSI / 10 bar (10-180Ohm)
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Pressure Sender 80 PSI Features:
Ground - Standard
Connection - 10-32 Stud
Voltage - 6-24V
Thread - 1/8-27 NPTF
Component Reference No. - AT84200
Max. Pressure Range - 80PSI / 5 bar (240-33Ohm)
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Silver
Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs
UPC: 754059005003
Pressure Sender 150 PSI Floating Ground - 1/8-27 NPT Features:
Ground - Floating
Connection - Knurled Nut
Voltage - 6-24V
Thread - 1/8-27 NPTF
Component Reference No. - 32/14
Max. Pressure Range - 150PSI / 10 bar (10-180Ohm)
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Silver
Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs
UPC: 754059004945
EasyLink Connecting Cable for AcquaLink® & OceanLink® GaugesEasyLink connecting cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.