Boat Outfitting - Trolling Motor Accessories

MKA-58 Boat Deck Reinforcement KitProvides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.Features: Provides additional strength and stability for mounting Minn Kota Quest series trolling motors Helps to distribute torque loads associated with higher thrust motors Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket Multiple mounting hole patterns allow for flexible installation Includes stainless steel hardware Designed for use in saltwater Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors

Read more less

Force™ Round Nose Cone with Transducer Mount - BlackReplace the standard part of your compatible trolling motor or use the nose cone when mounting equipment with traditional clamps.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Gesture Remote for Spy™ PoleThe low-profile handheld remote control offers total control of your Spy pole, along with unique gesture steering capabilities and user-programmable buttons. Attach the remote to your favorite rod for intuitive control of your Spy pole.In The Box: Gesture remote (includes four different mounting options) - 1 hat, 1 lanyard, 2 poles/blanks, 2 poles/bands - for Spy pole CR2032 lithium coin cell battery Hardware

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Riptide® Saltwater Composite Quick Release BracketRTA-19 Allows for easy removal of any Riptide® SM or Riptide SE bow-mount trolling motor High-yield composite construction is super strong and impervious to corrosion Low-profile design leaves deck clear when motor is removed Locking handle with stainless steel pins can be secured with padlock (not included).WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Large Offset Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18.5" x 15.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Small Offset Trolling Motor Plate - BlackThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder-coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Small 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate (18.5" x 13.5" x 1/2").Suggested Hardware: 1/4" - 20 Phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

16" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Quick Release Mounting Bracket for Axis & Shallow Water Anchors - WhiteRemoving your Lewmar shallow water anchor is a breeze with our compatible quick-release mounting bracket. Available in black or white, this dovetail-style bracket mounts directly to your boat’s transom or our other available mounting brackets, allowing for slide-out removal of your shallow water anchor for trailering, storage, or switching between boats.The motor mounting bracket for shallow water anchors attaches directly between the outboard motor and the transom, eliminating the need to drill into your boat's hull. Its powder-coated aluminum finish offers long-lasting durability in marine environments. Designed for use with Lewmar shallow-water anchors, this bracket provides a secure and reliable fit. Professional installation is recommended, as specialized equipment is required to support the motor properly during the installation process. Using basic tools, the motor mounting bracket is compatible with the Quick Release bracket for easy anchor removal. Features: For use with the Axis™ and Vector™ shallow water anchors DIY installation with included hardware Dovetail style mounting bracket securely holds the anchor in place Compatible with other Lewmar shallow water anchor mounting brackets Allows the anchor to be easily removed with simple hand tools for transport, storage, or use on other vessels Durable powder-coated aluminum finish withstands harsh marine conditions Designed for port or starboard mounting Measures 8" x 6" x 1.5" Specifications: Color: White Anchor Style: Shallow Water Hardware Type: Mounting Hardware Item Length: 8" Item Width: 6.5" Item Height: 1.5" What's Included? Mounting hardware Installation instructions

Read more less

Pinpoint GPSMotorGuide's proprietary Pinpoint GPS technology - available either integrated with select models or as an easy upgrade. Pinpoint uses an ultra-precise GPS receiver and precision control algorithms for incredibly accurate performance.A compact, easy-to-use remote controls these Pinpoint features:Anchor Holds boat position on a fixed GPS coordinate Stores and recalls up to eight positions While in Anchor mode, the directional controls can be used to move the boat in 5-foot increments in any direction Heading LockNavigates the boat to a specific compass headingRouteRecord and playback up to eight routes of up to four miles eachCruise ControlHold a GPS speed while navigating a heading or routeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Talon 6" Setback Bracket Riser Just like Talon locks you to your spot in the water, Minn Kota's mounting and adapter brackets keep Talon locked on your boat in any condition. Unparalleled strength combined with an innovative modular design, so it's easy to select the right mount and get Talon rigged up on any boat. Features: Provides 6" of additional setback For direct transom mount application only Provides precise boat positioning Quickly and quietly stops boat Easy to install

Read more less

Force® Kraken Transducer Replacement KitEasily remove, replace, or upgrade the built-in Garmin transducer on a compatible trolling motor with this kit. It’s recommended to replace all O-rings and compression seals so the motor returns to its original factory waterproof sealing. The nose cone is not included.Specifications: Color: Black Includes Transducer Replacement Part: Force® Kraken Compatible Devices:Force® Kraken trolling motor

Read more less