Boat Outfitting

Economy Multi-Color Folding Seat - Grey/CharcoalFeatures: A Comfortable Cushioned Seat To Support Your Backside Durable Upholstery, Folds Easily, Strap With Snap To Keep Seat Secure Rigid Injection Molded Frame Heavy-Duty Aluminum Powder Coated Hinges WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Trolling Motor Foot TrayFish in comfort and streamline your deck! Reduce back and foot pain and fish all day with the Panther Recessed Foot-Control Tray. The tray mounts flush to your boat and levels out the foot pedal while you fish. This unit adds a clean look to your deck and easily fits all Minn Kota and MotorGuide foot-control trolling motors. Easy installation and maintenance free. Features: Forward taper design makes the foot pedal level and drains water faster; Water flows through a 3/8" ID x 8' flexible vinyl tube Constructed of high-impact, UV-resistant, high-density polyethylene Color-molded throughout, no paint to chip or fade Installs easily in any brand boat, and includes installation instructions, cutting template, drain tube, and hardware Fits all Minn Kota and MotorGuide foot-control trolling motors

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 5.91 Box Dimensions: 5"H x 16"W x 21"L WT: 3.4 lbs UPC: 5060114797680 Quick Guide (pdf)

Read more less

Adjustable Motor SupportThe adjustable motor support has a universal design and comes with both the bolt on bracket and the over the roller bracket. It is adjustable from 34 in. to 46 in. and comes with 2 rubber straps a 20 in. motor strap (including hooks) and a 5 in. trailer strap. Owner's Manual (pdf)

Read more less

Johnson Evenrude Suzuki 9.9, 15 (2003-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Mercury 5 & 6 (All Years) & Nissan/Tohatsu 5 & 6 (1995 - Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

10" Atlas Series Hot Shot™ Jack Plate Hole Shot PlateREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

4" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

14" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

Camera Plate 3 Fits FLIR M300 Series Thermal Cameras for Dual Mount SystemsThe modular Dual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation.Specifically for Camera plate 2 (FLIR M300 Thermal Imaging Cameras for Dual Mount Systems) Specifications: Type: Adapters Box Dimensions: 2"H x 10"W x 12"L WT: 2.7 lbs UPC: 5060114797673

Read more less

SikaBiresin® AP077 + BPO Cream Hardener - White - QuartFeatures: Gelcoat repair system Easy to apply – Easy to sand High heat-resistance of 400°F (209°C) Accepts virtually all types of finishes Low moisture absorption for above or below the waterline applications Minimal shrink or sink upon cure Bonds to epoxy, vinyl ester, polyester, and many substrates Quick-set cure and finishing time WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

WLN30 Smart Wireless NMEA Multiplexer“The WLN30 is a smart NMEA to WiFi Multiplexer designed to connect your smart phone and other wireless devices to your boat’s navigation systems. It features three NMEA0183 inputs and easy web interface configuration.” Digital Yacht’s WLN30 Smart Wireless NMEA Mutiplexer takes iPad and tablet integration afloat even further with the ability to connect to existing on board GPS, AIS and instrument systems and transfer data wirelessly to an iPad or tablet – allowing compatible apps to display and compute with real time information. The WLN30 creates a secure, password protected wifi network on board to footprint the boat with data.When connected to, for example, an AIS system, real time AIS target positions and identity data will be displayed on detailed electronic charting through compatible apps including Weather4D, TimeZero, iAIS, iSailor, SailGrib, Seapilot and hundreds more. The tablet becomes a full function navigation display.The WLN30 has three NMEA0183 Inputs and one NMEA0183 Output, which can be programmed through its simple browser interface to operate at 4800 or 38400 baud rates. Data received on the three inputs is multiplexed together and transmitted to any wireless devices connected to the WLN30’s wireless network. The same multiplexed data is also available on the NMEA 0183 Output or in an alternative mode the NMEA 0183 Output can be configured to forward data from the wireless application, such as next waypoint or autopilot data, to other NMEA 0183 equipment.All configuration of the WLN30 can be done through its own simple web interface, just open your web browser, enter the WLN30’s IP address and you can set baud rates, multiplexing mode, network name, password and select AP mode.  No complicated programming software or app required and you can even view the received NMEA data in the web browser, for easy fault finding of issues.The WLN30 supports TCP and UDP network protocols for maximum compatibility with apps. If you want to have full bi-directional control of an autopilot, with guaranteed data integrity or you want to be the only person receiving the data, then select TCP. If however, you want to receive the same data on multiple devices, for instance a PC at the chart table and an iPad on deck, then select the UDP broadcast protocol.With its three NMEA0183 inputs, you can also utilise our SeaTalk to NMEA adaptor to allow SeaTalk instrument data to be interfaced directly to the WLN30 or our iKonvert gateway to connect NMEA 2000 data. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.Features: Three input NMEA 0183 to WiFi Multiplexer (4800 baud or 38400 baud) Multiplexed data transmitted over Wi-Fi and NMEA 0183 Output Web interface for setup and initial programming Set baud rates, SSID and password through web interface Supports both TCP and UDP (for multiple connections) protocols View received NMEA data in web browser for easy fault finding of issues Supports a bi directional Wi-Fi interface for autopilot control Fully compatible with popular navigation apps and software Easy to install IPX4 black box solution

Read more less