Boat Outfitting

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" ODThese Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”. Features: Investment Cast 316 Stainless Steel  30° Rectangular Base 1" Tube OD Base: 1-7/8" x 3-3/16" Fastener: 1/4" FH WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Prop Master Prop Stop Propeller StopFeatures: Simple to use Securely holds prop during changing Makes prop-changing safer Brightly colored for greater visibility (Remember to remove propeller stop before using your boat) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): N/A Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs UPC: 733572201109

Read more less

Sealing Kit for Water Capacitive SensorSealing Kit for Fresh Water Level Sensor.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Engine Oil Temperature Sensor - Single Pole, Common Ground - 50-150°C/120-300°F - 6/24V - M14 x 1.5 ThreadFeatures: Single Pole, Common Ground 50-150°C/120-300°F 6/24V M14 x 1.5 Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Liquid Polish - 1.7oz. BottleA diluted version of our original paste formula, this product is a high-performance cleaner and polish in a liquid form. Specially formulated to clean and polish with the ease and economy of a liquid, this concentrated formula goes three times farther than other liquids and leaves a brilliant shine in half the time.Cleans & Polishes:Brass, Copper, Silverplate, Sterling Silver, Chrome, Stainless Steel, Nickel, Bronze, Solid Gold, Aluminum, Anodized Aluminum, Pewter and Factory Hot Gun Bluing.Removes: Tarnish, rust, water stains, heat discoloration, oxidation & fingerprints. Not suitable for: Electroplated Finishes. How To Use:1. Apply Flitz Liquid Polish with a dry cloth2. DO NOT let dry3. Buff with Flitz microfiber cloth, BüffBall, or dry towelTarnished Brass, Copper, Bronze, etc: Apply Flitz with paper towel. Rub briskly, polish with soft cloth.Tarnished Silver & Gold: Apply light coat of Flitz with soft cloth. Polish with clean dry cloth until brilliant.Firearms: Apply light coat of Flitz with a soft cloth and polish with a clean dry cloth. Flitz will not harm factory gun bluing.Rust & Corrosion: Apply Flitz with #0000 Steel wool. If necessary, apply pressure when rubbing. Polish with soft cloth.Marine Corrosion: Apply Flitz using Bronze wool applying pressure while rubbing if necessary. Polish with a soft cloth.Aluminum, Mag Alloys, & Stainless: Apply Flitz and clean with paper towel. Polish with soft cloth.Heat Discoloration: Apply moderate coat of Flitz. Allow to penetrate 3 minutes. Rub with paper towel. Polish with soft cloth. Repeat if necessary.Lime Deposits: Apply Flitz with stiff brush. Rub until lime is removed. Polish with soft cloth.Fiberglass & Painted Surfaces: Apply Flitz with damp cloth. Polish with soft, dry cloth. Specifications: Type: All Purpose Box Dimensions: 1"H x 2"W x 5"L WT: 0.15 lbs UPC: 065925045024

Read more less

Bracket Assembly Mounting Set - Viewline GaugesFor omitting the fastening nut.  This is recommended if the installation location is subject to vibratory loads.  Screw the stud bolts into the provided drill holes in the enclosureFeatures:Designed for 52mm, 85mm and 110mm GaugesFor Panel Installation *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bus Cable - 10M for AcquaLink® GaugesVDO Marine Bus Cable - 10M.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

32-Pin Power Cable Single Engine Set-Up - .5M32-pin power cable for single engine.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deep-Pipe Level Sender - 160mm - 240 to 33 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 160 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 240 to 33 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 2"H x 4"W x 9"L WT: 1 lbs UPC: 7640178725799

Read more less

52 MM (2-1/16") AcquaLink Transmission Oil Pressure 30 Bar/440 PSI - Black Dial & BezelAcquaLink realizes state-of-the-art solutions to provide customers with instantaneous and accurate nautical information.  The instruments are designed for performance, with ease of use remaining an important attribute. The use of premium material - such as mineral glass lenses - guarantees the highest level of reliability and readability, as well as low energy consumption.Features: Maximum precision and the deployment of pioneering technologies are equally important as ease of use and stylish design. AcquaLink components are made of high class materials, like mineral glass, stainless steel and aluminum. All products are manufactured below ISO 9001 certified environment. Our plug and play solution design concept offers a high level of installation flexibility. A cross-platform standard offers maximum freedom in respect of cockpit customization. We ensure seamless integration and optimum utilization of AcquaLink devices for extreme conditions at sea. Harmonized dashboard look. Technical Specifications: Operating Range - +0 to +30 Bar /+0 to 400 PSI Input Signal -  EasyLink Nominal Voltage -12 / 24 V Color - Black/Aluminum  Installation Diameter - 52 mm (2-1/16") Installation Depth - 50 mm  Lens - Mineral Glass - Anti-fog IP Class - IPX6 Connector Type - AMP Superseal IP65 3-Pole  In the Box: Gauge Install/Safety Manual *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: AcquaLink Gauge Size: 2-1/16" Box Set: No Gauge Type: Oil Pressure Box Dimensions: 3"H x 3"W x 4"L WT: 0.32 lbs UPC: 7640178720565 Owner's Manual (pdf)

Read more less

NavControl TFT Controller for AcquaLink® & OceanLink® - BlackFeatures: Color: Black NavControl TFT Controller Specifically for AcquaLink® and OceanLink® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom Trim Control Push Button Trim SwitchTransom Trim Control Switch/Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less