Electrical

Dual USB Power Plug with Voltage/Amp Meter LCD screen displays charging status in amps, battery voltage, and low voltage audio alarm. Stamped stainless steel and injection molded nylon construction this USB power plug adapter charges two devices simultaneously. Input 12-24V, Single output DC 5V/2.4A. Total output is a 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC Intelligent Pure Sine Wave Inverter 1200W, 20-40V In, 110V OutDigital Signal Processor controlled high power MosFet technology creates a low voltage Sine-Wave that is fed into a compact toroidal step-up transformer to create a very clean low EMI AC output.Using the free to download ‘Power Wizard’ software, the user can select output frequency, output voltage, output frequency and low voltage shutdown parameters from any laptop through the standard micro-usb interface.Safety features include current limiting, short circuit protection, inrush protection (during connection to the DC source), overtemperature de-rating and shutdown and low input voltage warning and shutdown.An Off-Line UPS options allows external AC to be routed through the inverter for high power UPS function if the external AC fails.Features: Programmable Low Voltage Shutdown Overload Protected Short Circuit Protected DSP Controlled Programmable Frequency Over Temperature Protected Hardwire AC Output Connection Programmable Output Voltage Three year parts and labour warranty

Read more less

Waterproof IP66 DC Battery Charger 10A, 24V Out, 30-80V In, RuggedizedThe BCH10 Step Down series of Battery Chargers supply up to 10 amps of charging current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments. The output voltage is configured to allow permanent connection to the battery.The standard BCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade BCH10MW features separate bayonet style MIL connectors for input and output.The all surface mount high frequency design offers higher reliability, higher efficiency (more than 91%), more power (up to 544 watts at 48 VDC Out) and minimum size.The BCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.The unit has reverse input protection, reverse battery connection protection, output over-voltage protection and features spark free connection to the battery. Smart Ideal Diode output circuitry prevents any reverse current flowing from the battery back into the converter.Features: Watertight O-ring sealed and EMC gasketed enclosure ‘Output ON’ and “Charging” LED indicators Up to 80V input Compact size and easy mounting Deutsch DT04-4P connector on pigtail or MIL connectors Heavy duty ruggedization with wide temperature range Custom output voltages available Custom connector arrangements Input and output EMC filters Two year warranty (parts and labor) Specifications: Charger Input - Voltage: 30-80v Charger Output - Amps: 10a Charger Output Voltage: 24v Portable: No Box Dimensions: 5"H x 8"W x 9"L WT: 2.1 lbs

Read more less

Waterproof IP66 DC Converter 10A, 12V Out 20-80V In, RuggedizedThe VCH10 Step Down series of Voltage Converters supply up to 10 amps of output current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in rugged environments.The standard VCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade VCH10MW features separate bayonet style MIL connectors for input and output.The all surface mount high frequency design offers higher reliability, higher efficiency (more than 92%), more power (up to 544 watts at 48 VDC Out) and minimum size.The VCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.The unit has reverse input protection, output current limiting and output over-voltage protection.Features: Watertight O-ring sealed and EMC gasketed enclosure MIL connectors ‘Output ON’ and ‘Overload’ LED indicators Compact size and easy mounting Up to 80V input Heavy duty ruggedization with wide temperature range Paralleling diodes Custom output voltages available Two year warranty (parts and labor) Specifications: Charger Input - Voltage: 20-80v Charger Output - Amps: 10a Charger Output Voltage: 12v Box Dimensions: 5"H x 8"W x 10"L WT: 2.05 lbs

Read more less

Waterproof IP66 DC Converter 10A, 24V Out, 30-80V In, RuggedizedThe VCH10 Step Down series of Voltage Converters supply up to 10 amps of output current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in rugged environments.The standard VCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade VCH10MW features separate bayonet style MIL connectors for input and output.The all surface mount high frequency design offers higher reliability, higher efficiency (more than 92%), more power (up to 544 watts at 48 VDC Out) and minimum size.The VCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.The unit has reverse input protection, output current limiting and output over-voltage protection.Features: Watertight O-ring sealed and EMC gasketed enclosure MIL connectors ‘Output ON’ and ‘Overload’ LED indicators Compact size and easy mounting Up to 80V input Heavy duty ruggedization with wide temperature range Paralleling diodes Custom output voltages available Two year warranty (parts and labor) Specifications: Charger Input - Voltage: 30-80 VDC Charger Output - Amps: 10a Charger Output Voltage: 32v Box Dimensions: 5"H x 8"W x 10"L WT: 2.05 lbs

Read more less

AC Charger 2-Bank 20A 12V Out, 110VAC In, with Digital Volt/Amp MeterThe traditional BCA310 series chargers feature 300 watts of precision charging power for 1, 2 or 3 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: 300 watts of charging power One, two or three bank charging Temperature compensation Manual equalization mode Two or three stage charging profiles Low EMI 110 and 220 VAC inputs Adjustable float voltage Three year parts and labor warranty Specifications: Charger Input - Voltage: 110v Charger Output - Amps: 20a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 7"H x 13"W x 16"L WT: 9.85 lbs

Read more less

2112A Battery On/Off Switch Universal Mount without AFD Universal mount switches have longer stud lengths for improved assembly and easier cable routing. They are built with heavy-duty copper sweep contacts to ensure positive circuit control. Rugged internal components are protected by a tough, impact-resistant polycarbonate housing that is impervious to the elements.Features: Cable Lug Size: 3/8" Dimensions: 5.0" x 2.75" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Heat Shrink Tubing 3/16" x 3" - Red - 3 PiecesFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F/125°C Operating temperature range of -40°F to 230°F/-40°C to 110°C UL 224 20-12 AWG Properly Shrinking Heat Shrink TubingTo properly shrink heat shrink tubing, start by selecting a heat source that will apply  the appropriate temperature. Heat shrink tubing will state the shrink temperature, while heat tools are rated based on flame temperatures. Once a heat tool is selected, apply heat gradually to avoid shrinking the tubing inconsistently or burning the tubing. Additionally, continually moving the heat source along the length of the tube will reduce the likelihood of burning the tubing during installation.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 2"W x 4"L WT: 0.01 lbs UPC: 091887990508

Read more less

47-Piece Adhesive Lined Heat Shrink Tubing KitWire management kit including 47 pieces of adhesive lined heat shrink tubing.Includes:Black (10) 3/16" x 6" (10) 1/4" x 6" (10) 3/8" x 6" (5) 1/2" x 6" (3) 3/4" x 3" (3) 1" x 3" Red (3) 3/4" x 3" (3) 1" x 3" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cable Ties Box Dimensions: 2"H x 7"W x 11"L WT: 0.85 lbs UPC: 091887990782

Read more less

100-Piece Tinned Copper Lug KitWire Management Kit with 100 pieces of tinned copper lugs.Includes: (10) 8 AWG, 5/16", (10) 8 AWG, 3/8" (10) 6 AWG, 5/16", (10) 6 AWG, 3/8" (10) 4 AWG, 5/16", (10) 4 AWG, 3/8" (10) 2 AWG, 5/16", (10) 2 AWG, 3/8" (5) 1/0 AWG, 5/16", (5) 1/0 AWG, 3/8" (5) 2/0 AWG, 5/16", (5) 2/0 AWG, 3/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Kits Package Qty: 400 Heat Shrink: No Box Dimensions: 2"H x 7"W x 11"L WT: 2.9 lbs UPC: 091887990775

Read more less

6008200 m-Series Selector 3 Position Battery Switch - BlackSwitches isolated battery banks to all loads or combines battery banks to all loads.Specifications: Switch Type: Selector 3 Position Color: Black Switch Positions: 3 Battery Combine: No Alternator Field Disconnect: No Maximum Voltage: 32V DC Continuous Rating: 300A Battery Inputs: 2 Owner's Manual (pdf)

Read more less

4322 Circuit Breaker Switch Panel 6 Position - GrayDesigned for exposed mounting applications.Features: Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, flame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems Specifications: Color: Gray Positions: 6 Nominal Voltage: 12 VDC Maximum Amperage: 45A Terminal Type: 1/4" Male Quick Connect Hardware: Stainless Steel #6 x 5/8" mounting screws  Ring Terminal Size: M5 (#10) Specifications: Voltage: 12v AC/DC: DC Max Breaker Quantity: 6 Waterproof: Resistant Box Dimensions: 0"H x 6"W x 10"L WT: 0.6 lbs UPC: 632085043223

Read more less