Hunting & Fishing - Rod Holders

Elite Screwless Stainless Steel 30° Rod & Cup Holder - Drain - Round Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.7 lbs UPC: 857515002162 Quick Guide (pdf)

Read more less

Flush Mount Rod Holder - WhiteFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: White Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 12"L WT: 0.35 lbs UPC: 035514325073

Read more less

Flush Mount Rod Holder 10° - Deluxe Anodized FinishAluminum 10º Rod Holder with Round Flange for 5-1/2" Tube. Also pairs with the Carbon Fiber Tele-Sun Shade Pole.Features: Tube section length is 5-1/2" Welded I-beam securely seats rod butt Welded pin design Form-fitted anti-fungal PVC white liner included Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1 - Orca Rod Holder body1 - 459 adjustable rod holder extension1 - 5/16" x 2 1/4" S.S. Star knobThe 405 is an optional boom mount for all Scotty downriggers. When adjusted properly, the 405 allows for closer inboard positioning of the Orca rod holder, creating faster and easier rod removal.

Read more less

Fishing Rod Holder - 65° Angled Flush Mount - Chrome Plated ZincFeatures: Chrome Plated Zinc Alloy Flange Angled Flush Mount (Approximately 65°) Anodized Aluminum Tube Soft Black Liner Flange Gasket with Integral Flip-Up Cap D01 & DPD - Integral Drain Bib or 5/8 Inch I.D. Flexible Hose Specs: Mount Type: Angled Drain Bib: No I.D. Tube: 1-5/8" O.D. Tube: 2" Length Under Flange: 8" Flange: 4-1/4" x 3-1/2"

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5004SLColor:   SilverFits:      1.900" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Silver Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1 lbs UPC: 096811500419

Read more less

Swivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 16" Mounting Style: Flush Box Dimensions: 4"H x 7"W x 17"L WT: 3.95 lbs UPC: 096811517912

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-534HS/XS Heavy 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513419

Read more less

Side Mount Rod Holder - 9" - WhiteSide Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: White Length (Inches): 9" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 12"L WT: 0.35 lbs UPC: 035514325097

Read more less

Adjustable Mid Mount Rod Holder Aluminum 7/8" or 1" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 7/8" or 1" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 7/8" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010867

Read more less

Plastic Rod & Cup Holder 30 Degree Open with Oval Top - BlackFeatures: ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Color: Black

Read more less

Rod Holder II with MiniPort TracMountDon’t let yourself be limited when it comes to fishing — the RAILBLAZA Rod Holder II with MiniPort TracMount will help you catch more fish without compromise. This rod holder can hold any type of rod and reel, and features quick adjustments with a rotating collar for reduced ‘strike-theft’, a gimbal lock for compatible rods, and an adjustable 360-degree range and over 90-degree vertical range. And if that isn’t enough, the RAILBLAZA MiniPort TracMount fits most existing tracks from both sides of your kayak. Plus, no tools are required when repositioning.  Don’t limit your angling fun – reach for the Rod Holder II with MiniPort TracMount for stress-free success in your next fishing adventure.Don't be limited when it comes to fishing - get the RAILBLAZA Rod Holder II with MiniPort TracMount and never let another fish escape! This rod holder is adjustable, fits most tracks, and requires no tools. Experience maximum angling success with this awesome piece of gear - go catch a big one!Rod Holder II with MiniPort TracMount Overview:NO LIMITS - You're not limited to what you can catch when you have the RAILBLAZA Rod Holder II with MiniPort TracMount. This rod holder can hold any type of rod and reel, so you can fish with the confidence that your equipment is secure.QUICK ADJUSTMENTS - With a rotating collar for reduced ‘strike-theft’, a gimbal lock for compatible rods, and an adjustable 360-degree range and over 90-degree vertical range, the RAILBLAZA Rod Holder II with MiniPort TracMount is designed for quick adjustments and easy use.FITS MOST TRACKS - The RAILBLAZA MiniPort TracMount fits most existing tracks from both sides of your kayak, so you can reposition it easily without any tools.ENJOY FISHING WITHOUT COMPROMISE - When you have the RAILBLAZA Rod Holder II with MiniPort TracMount, you'll be able to fish without compromise and catch more fish than ever before.Features: Rod Holder II is compatible with baitcasting, spinning, offshore, and fly reels Rotating collar helps prevent “strike theft” StarPort Base rotates 360 degrees 90-degree vertical rotation RAILBLAZA compatible track mount base that requires no tools for repositioning Fits Wilderness Systems, Native Watercraft, Jackson Kayak, YakAttack, Scotty, YakGear, and RAILBLAZA tracks. Loosening, adjusting, and tightening is as simple as turning with your hand MiniPort Can Be Used With Many Other RAILBLAZA Kayak Rail Accessories Specifications: Weight: 0.80 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x RodHolder II 1 x MiniPort TracMount Specifications: Finish: Black Mounting Style: Surface Type: Vertical Mount Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs UPC: 814162020826

Read more less