Marine Hardware

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Beige

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

Navigation Rack5"H x 16-3/4"W x 3-1/2"D

Read more less

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Read more less

7-1/2" Gas Spring - 40lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 7-1/2" Comp. Length - 5-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 40 Specifications: Length: 7-1/2" Lift Capacity: 40 lbs Box Dimensions: 1"H x 3"W x 9"L WT: 0.2 lbs UPC: 725060314019

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Non-Skid Color: Black

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Concealed Soft Draw Latch with Keeper - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical

Read more less

SuproFlex Rub Rail Kit Gray with Gray Insert - 2"H x 29/32"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes.Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Pairs with V12-0307GRD gray insert (included in the kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Read more less

Description: 316 S.S. 6" E-Z Push-Up Cleat. Overall length-6-1/2" Overall width - 1-1/2" Depth - 3-9/16" Cleat length - 6" Stud length - 1-7/8" Barb size - 3/4" Max Rope Diameter - 1-1/4" Specifications: Size: 6" Finish: Polished Construction: Stainless Steel Box Dimensions: 1"H x 7"W x 9"L WT: 1.65 lbs UPC: 725060680916

Read more less

Quick Dock Cleat - 2-PackUsed for docking and tying up your paddleboard, kayak, small boat, or canoe with ease. Simply insert the quick dock cleat between dock boards and turn 90 degrees. Then tie up using your dock line.Features: High strength Stainless Steel material Rated for 1,000 pounds each Includes 2 dock cleats ¼” material Deburred clean edges Includes a carabiner Includes a strap to hold them together when they are not being used Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 6"W x 8"L WT: 0.55 lbs

Read more less