Marine Hardware

Pontoon Fender & Dock Line Hanger - 2-PackThe pontoon dock line holder is the easiest most user-friendly way to hang a fender from your railing. It clips onto the railing and has a 1-way cleat on it to lock in your dock line. The built-in cleat allows you to adjust the height of the dock line when hanging fenders for mooring your pontoon.Features: Sold as a 2-pack Aluminum shell Nylon dock line cleat inside Push button locking mechanism built-in Deburred edges for a smooth finish Hooks to square pontoon railings Dock rope cleat allows you to adjust lengths Great for hanging fenders

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Smooth

Read more less

Quarter-Turn Textured Deck Plate with Internal Collar - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SuproFlex Rub Rail Kit with Flex Vinyl Overlay Insert - 1-5/8"H x 7/8"W x 60'L - White with White InsertThe Semi-Rigid SuproFlex Rub Rail Kit with a Flexible Vinyl Overlay Insert – an all-in-one Rub Rail replacement kit that complements a variety of boat types, including bass boats, and freshwater and saltwater bay boats. Semi-Rigid SuproFlex features a semi-rigid vinyl back and a 95-durometer, firmer face, and pairs exclusively with our attractive Flexible Overlay Vinyl Insert for added protection from impact and style. Additionally, this co-extruded vinyl rub rail features shock-absorbing channels for higher impact resistance and requires less heat during installation when compared to other semi-rigid or rigid profiles. This rub rail kit is available in a variety of sizes and colors, and includes stainless steel end caps and screws.Features: Available in one continuous coil of 60' Co-extruded to provide two levels of hardness Semi-Rigid backing and 95-durometer front Pairs exclusively with V12-9992 Flexible Overlay Vinyl Insert (included in kit) Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Kit includes stainless-steel end caps and screws Made in the USA 5-year limited warranty

Read more less

SuproFlex Rub Rail Kit - White with Flex Chrome Insert - 2"H x 31/32"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Textured Quarter Turn Deck Plate - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - Black - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Combination Gas Fill & Tank Vent for 2" Hose - DieselFeatures: Chrome Plated Bronze Straight Neck Integral Tank Vent with Flame Arrestor O-Ring and Integral Retainer on Cap Included Ground Wire Required Specifications: For Fuel Hose: 2" For Vent Hose: 5/8" Length of Neck: 3-5/8" Screw Size: #8

Read more less

Cam BarThis cam bar is a spare part of Perko’s Flush Hatch Dog with a rectangular flange.  More specifically, it’s the cam bar for size #2. Quick Guide (pdf)

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Read more less

Finger Pull 5/8" Barrel Length 1-1/4" Outer Diameter Recess Mount

Read more less