Marine Navigation & Instruments - Autopilots

GRF™ 10 Extension Cable (15M)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15M to your cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 9"L WT: 1.75 lbs UPC: 753759991173

Read more less

Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted WheelFeatures: Replaces existing helm Electronic clutch disengages for manual steering Rotary drive system Fits behind dash Safety override technology Current 1.25A Typical, 5A Peak Wireless control module plus handheld pendant - steering in the palm of your hand Steer, fish and cruise from anywhere on the boat Easy DIY installation - no need for professional installer 2 Year limited warranty - purchase with confidence Specifications:Wireless Controller & Receiver Meets FCC standards Additional Handheld and receiver can be paired in field Pendant and receiver auto-off in 30 minutes if no usage Over 1 Million control codes provide enhanced security Handheld Pendant Water proof Supplied with 2xAAA batteries Includes lanyard Wireless Receiver & Motor Controller Waterproof Motor drive capability up to 25A Overload protection Reverse polarity protection 12V DC nominal (9V min - 16V max operating range) Offers pass-through capability for Autopilot motor and clutch control circuits Specifications: Type: Parts Box Dimensions: 9"H x 9"W x 16"L WT: 15.2 lbs UPC: 628309263386 Brochure (pdf)

Read more less

Sterndrive System f/Mercruiser from 1994 & North American Volvofrom 1997 w/9' CableThe heart of this pilot drive system is the remote drive. The drive unit is connected to the boat steering by a cable and connection kit.The remote drive system is ideal for the following three types of engine application: Stern drives also known as I/O drives or Z drives Outboard engines up to 150HP Inboard engines requiring traditional rudder steering Features: Low Cost Solution - No need to change to hydraulic steering Easy to Fit - Simple to install kits Discreet Installation - All components mounted out of sight Time Saving - Rudder feedback option mounts directly on drive Safe - Manual override without disengaging the autopilot Compatible with all major autopilot brand electronics - simple solutions for difficult installations Specifications: Steering Type: Cable/Solenoid Box Dimensions: 8"H x 16"W x 27"L WT: 20.3 lbs UPC: 628309191092

Read more less

OC15109-6 Steering Cable8" Stroke x 6' long For use with Type R Remote Drive Unit Specifications: Type: Parts Box Dimensions: 2"H x 20"W x 20"L WT: 4.2 lbs UPC: 8904284129476

Read more less

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309166571

Read more less

Integrated Rudder Feedback UnitsOC15SUK27ETypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 628309166595

Read more less

CCU Extension Cable 5MMount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 7"W x 9"L WT: 0.8 lbs UPC: 753759102685

Read more less

Type 1 Linear Drive - 12VLinear drive for mechancically steered vessels up to 22,000lb (10,000kg).Designed for boats with existing mechanical steering systems. The mechanical linear drive provides powerful thrust, fast hardover times and quiet operation. Features: Low backdrive force, to minimize the drives effect on the boats steering when the autopilot is in standby A powerful electric motor controlled by an electromagnetic fail-safe clutch, using a high tensile belt drive and epicyclic gearbox High performance for minimum current consumption Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 12"W x 31"L WT: 17.3 lbs UPC: 023193811307

Read more less

Steering Cable Adapter KitOC15SUK08f/ TFX SSC62 - Uflex M66 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309133634

Read more less

ST1000 Plus Tiller PilotST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg)*Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement.Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin  Mounting Socket  Specifications: Steering Type: Tiller Box Dimensions: 5"H x 7"W x 21"L WT: 5 lbs UPC: 023193100098 Quick Guide (pdf)

Read more less

12CI Pumpset - 12VDCThe 12CI Pumpset, 12 VDC is intended for use with Si-Tex autopilot systems.

Read more less

EV-200 Sail Linear Drive Evolution AutopilotFeatues: A complete autopilot-in-a-box Evolution Ai for superior performance No calibration required Includes Type 1 Linear Drive Unit SeaTalkng Network Compatible ACU-200 auxiliary power to SeaTalkng network Includes p70s Autopilot Controller Includes: EV-1 Sensor Core p70s Autopilot Control Head ACU-200 Actuator Control Unit (Includes the M81105 Rotary Rudder Reference) Type 1 Short Linear 12V Evolution Cabling Kit EV Unit O-Ring Pack (set of 2) Wall Mounting Bracket The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkngand NMEA2000 networks.Features: Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays p70s Autopilot Control HeadThe p70s is a push-button operation controller designed primarily for sailboats.Superior ViewingAdvanced LED backlighting offers low power consumption and delivers vibrant color and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions.Features: LightHouse user interface is simple and quick to use Wide 160° viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) ACU-200 Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Type 1 Mechanical Linear DriveThe Type 1 Mechanical Linear Drive is for mechancically steered vessels up to 22,000lb (10,000kg). Designed for boats with existing mechanical steering systems, the mechanical linear drive provides powerful thrust, fast hardover times and quiet operation.Features: Low backdrive force, to minimize the drives effect on the boats steering when the autopilot is in standby A powerful electric motor controlled by an electromagnetic fail-safe clutch, using a high tensile belt drive and epicyclic gearbox High performance for minimum current consumption Supported Drive UnitsIncludes Type Linear Drive UnitEvolution Cabling Kit 1 x SeaTalkng Power Cable (0.4m) 1 x SeaTalkng Backbone Cable (5m) 1 x SeaTalkng Spur Cable (0.4m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator Specifications: Steering Type: Cable/Solenoid Box Dimensions: 12"H x 13"W x 31"L WT: 30.5 lbs UPC: 723193854150 Quick Guide (pdf)Brochure (pdf)

Read more less