HDMI to IP Encoder - Converts HDMI to IP - Compatible with Raymarine, Simrad & FurunoConvert your HDMI video source to a high-definition IP stream compatible with Raymarine, Simrad, B & G, and Furuno Chart-Plotters using the HDMI2IP-01 Single Channel Encoder from Iris Innovations.This small and compact little box takes your HDMI video and uses H.265 / H.264 compression algorithms to encode the video into a high-definition IP stream which leading a chartplotters process as if it were an IP camera device. Simply configure the device to sit on your MFD network, hook up your HDMI camera, and then configure your MFD in the same way you would configure an IP camera. If your MFD works as an RTSP server (such as Raymarine Axiom and Furuno TZT devices) simply set the HDMI2IP unit to accept its IP address via RTSP and you are good to go.Your MFD will treat the stream as if it were an IP camera, which means once configured, the video will display on all compatible devices connected to your MFD network, greatly simplifying installation.The device is powered from your vessel (or vehicle’s) +12VDC supply and draws less than 200mA.Features:
Converts High Definition HDMI video into IP video streams using H.265 / H264 Compression
Compatible with Raymarine, Navico (Simrad / B & G), and Furuno Chart-Plotters
HDMI Devices Handled as IP Cameras by Compatible MFD’s
Perfect for Displaying HD Video Ouput from CMAC on your Chartplotter
Connect to the MFD Network to View Video on all Connected, Compatible Devices
Low Power, +12VDC Operation.
Small, Compact, and Easy to Install
Supports Audio
Can be Used to Encode any HDMI Video Source
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Hi-Resolution Analog Mini Dome Camera - 316 Stainless Steel - CVBS - TVI - 3.6Iris’s SX60 range of miniature marine grade stainless steel cameras are available in multiple formats and deliver the highest quality video to suit your application.The IRIS-S060 features a multi-format 4-in-1 camera module (CVBS, TVI, CVI, AHD) designed for maximum compatibility with most marine chart plotters, digital recorders, and monitors.The IRIS-S060 can be set to output analog video (CVBS), or a range of Analogue Hi-Def formats (HD-TVI, HD-CVI, AHD) providing up to 1080P high-definition resolutions in real-time. When used with an IRIS HD switcher or HVR or our TVI to HDMI converter, the IRIS-S060 can be connected to HD TVs and MFDs with digital inputs such as Garmins 8000 series or Simrads NSO Series.Like all models in our 60 range, the cameras are shipped as standard with a 3.6mm lens offering 80 HFOV, with a wide-angle 2.1mm lens (110 HFOV) and ultra-wide-angle 1.8mm lens (125 HFOV) options available.The S060’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger vessels, while fitting in equally as well with the high-end aesthetic of luxury vessels and mega yachts.Measuring only 58mm high by 60mm in diameter, the S060 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells.Whether you need high quality and rugged camera as part of your onboard surveillance system, for the engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, our IRIS-SX60 range of cameras is the perfect solution.Features:
Marine Grade 316 Stainless Steel Rugged Corrosion Free Case
Features 4-in-1 Video Format Camera Module (CVBS/TVI/CVI/AHD)
Available in High Polish (standard), Brushed, or Custom Paint Finish
Analog (CVBS/Composite Video) Resolution 1000TVL
Set to TVI for 1080P HD Resolution in Real Time (No Network Latency)
Built In Infra Red LED Illumination (10M Range)
Extremely Low Power Consumption
IP66 Environmental Protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)
Axiom+™ 12 RV - 12" Chartplotter/Fishfinder with Lighthouse North America ChartThe performance-tuned Axiom® Plus is a new generation of award-winning Raymarine multifunction displays. Optimized for speed, Axiom Plus is equipped with a powerful quad-core processor for industry-leading responsiveness and speed, giving users the power to seamlessly redraw charts, navigate with augmented reality, and experience RealVision™ 3D sonar.New, higher-resolution IPS displays deliver 25 percent more brightness, and new day/night color palettes offer enhanced visibility in any lighting condition. Axiom Plus features the renowned LightHouse 3 OS, the most powerful and easy-to-use Raymarine MFD operating system to date.Performance Tuned:
Designed for speed, responsiveness, and future expansion.
Powerful quad-core processor, plus increased onboard storage for personal data and apps
Fluid and fast chart redraw of new Raymarine LightHouse Charts, plus Navionics and C-MAP
ClearCruise™ Augmented Reality-capable for smarter navigation decisions
Smart and intuitive LightHouse 3 OS makes navigating easy
Maximum Visibility:
Upgraded IPS display technology delivers charts, sonar, radar, and video in stunning color
IPS display technology delivers wider viewing angles and sharp contrast at twice the resolution of traditional displays
7-, 9-, and 12-inch all-weather displays are 25 percent brighter (up to 1,800 nits)
HydroTough™ Nano-coated, impact-resistant glass screen repels water, oil, and smudges for better viewing and accurate touch controls
Improved viewing with new LightHouse 3 color themes, including light, dark, and night mode
The Axiom+ 12 RV includes surface and trunnion mounting kits, mounting hardware, power/data cable, and installation instructions and Lighthouse North America Chart.
Features:
IPS display technology delivers wider viewing angles and sharp contrast at twice the resolution of traditional displays
LightHouse 3 OS is fast, fluid, and easy to learn. An uncluttered interface that is easily personalized for your style of navigating
RealVision 3D™ Sonar Built-In - Go fishing like never before with life-like 3D imagery of structures and fish - an unprecedented view of the underwater world
Powerful 4 Channel Sonar supports RealVision 3D, CHIRP DownVision, SideVision, High Frequency CHIRP, and 600 Watt (50/200 kHz) sonar
Wide Spectrum CHIRP sonar transmits on 60 different frequencies for the most life-like sonar imagery and simply the best fish targeting
Next-generation, high-performance 10 Hz GPS/GNSS receiver with 4X increased sensitivity for accurate positioning
Support for the best charts from Navionics and LightHouse Raster and Vector Charts sourced from leading map makers like NV Digital, Blue =Latitude, and more
Navigate Safely at Night with the optional FLIR M100 and M200 compact marine thermal cameras
Quantum CHIRP Radar Ready - Superior solid state CHIRP radar delivers no compromise performance on long and extremely short range
Marine Audio Control - Turn up the volume and control NMEA2000 compatible marine audio systems like Rockford Fosgate
Ready to Network with Raynet Ethernet and NMEA2000. Connect multiple Axiom displays or expand with Quantum, HD radar, IP cameras, engine gauges, autopilots, instruments, and more
Built-in Wi-Fi lets you to stream and control Axiom right from your smartphone or tablet. You can also sync Axiom's waypoints, routes, and charts with Navionics mobile app
Specifications:
Transducer Included: No
Touchscreen: Yes
Screen Size: 12"
Cartography Brand: Navionics/C-Map
Box Dimensions: 1"H x 4"W x 5"L WT: 11.9 lbs
Owner's Manual (pdf)Brochure (pdf)
Axiom+ 12 RV - 12" Chartplotter/Fishfinder The performance-tuned Axiom® Plus is a generation of award-winning Raymarine multifunction displays. Optimized for speed, Axiom Plus is equipped with a powerful quad-core processor for industry-leading responsiveness and speed, giving you the power to seamlessly redraw charts, navigate with augmented reality, and experience RealVision™ 3D sonar. Higher resolution IPS displays deliver 25 percent more brightness and day/night color palettes offer enhanced visibility in any lighting condition. Axiom Plus features the renowned LightHouse 3 OS, the most powerful and easy-to-use Raymarine MFD operating system to date.PERFORMANCE TUNED
Designed for speed, responsiveness, and future expansion
Powerful quad-core processor, plus increased onboard storage for personal data and apps
Fluid and fast chart redraw of Raymarine LightHouse Charts, plus Navionics and C-MAP
ClearCruise™ Augmented Reality-capable for smarter navigation decisions
Smart and intuitive LightHouse 3 OS makes navigating easy
MAXIMUM VISIBILITY
Upgraded IPS display technology delivers charts, sonar, radar, and video in stunning color
IPS display technology delivers wider viewing angles and sharp contrast at twice the resolution of traditional displays
7-, 9-, and 12-inch all-weather displays are 25 percent brighter (up to 1,800 nits)
HydroTough™ Nano-coated, impact-resistant glass screen repels water, oil, and smudges for better viewing and accurate touch controls
Improved viewing with LightHouse 3 color themes, including light, dark, and night mode
The Axiom+ 12 RV includes surface and trunnion mounting kits, mounting hardware, power/data cable, and installation instructions.Features:
IPS display technology delivers wider viewing angles and sharp contrast at twice the resolution of traditional displays
LightHouse 3 OS is fast, fluid, and easy to learn. An uncluttered interface that is easily personalized for your style of navigating
RealVision 3D™ Sonar Built-In - Go fishing like never before with life-like 3D imagery of structures and fish - an unprecedented view of the underwater world
Powerful 4 Channel Sonar supports RealVision 3D, CHIRP DownVision, SideVision, High Frequency CHIRP, and 600 Watt (50/200 kHz) sonar
Wide Spectrum CHIRP sonar transmits on 60 different frequencies for the most life-like sonar imagery and simply the best fish targeting
Next-generation, high-performance 10 Hz GPS/GNSS receiver with 4X increased sensitivity for accurate positioning
Support for the best charts from Navionics and LightHouse Raster and Vector Charts sourced from leading map makers like NV Digital, Blue =Latitude, and more
Navigate Safely at Night with the optional FLIR M100 and M200 compact marine thermal cameras
Quantum CHIRP Radar Ready - Superior solid state CHIRP radar delivers no compromise performance on long and extremely short range
Marine Audio Control - Turn up the volume and control NMEA2000 compatible marine audio systems like Rockford Fosgate
Ready to Network with Raynet Ethernet and NMEA2000. Connect multiple Axiom displays or expand with Quantum, HD radar, IP cameras, engine gauges, autopilots, instruments, and more
Built-in Wi-Fi lets you to stream and control Axiom right from your smartphone or tablet. You can also sync Axiom's waypoints, routes, and charts with Navionics mobile app
Specifications:
Transducer Included: No
Touchscreen: Yes
Cartography Brand: Navionics/C-Map
Screen Size: 12"
Box Dimensions: 8"H x 13"W x 15"L WT: 11.85 lbs
UPC: 723193836989
Owner's Manual (pdf)Brochure (pdf)
veKonvert NMEA 2000 GatewayveKonvert brings NMEA 2000 connectivity to Victron’s popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.FeaturesveKonvert is a stand-alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors, and MPPT Solar Charge Controller range into NMEA 2000 systems.This functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower-cost, simpler solution for smaller installations that just need the electrical data displayed on a multi-function display.Boaters and boat builders like a clear and uncluttered dash or nav area, so integrating electrical data into the main navigation display is a popular and cost-saving option.The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.Victron solar charge controllers (MPPTs) and battery monitors can now also interconnect to your NMEA 2000 MFD via the veKonvert interface.InstallationInstallation is simple – just "T" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt, and you've got battery and electrical data on your NMEA 2000 network! Note that one veKonvert is required for each battery bank.Specifications:
Universal NMEA 2000 gateway for Victron products with a VE.Direct interface
Enables battery management or solar charge monitoring on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc)
Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm
Easy installation, plug ‘n’ play connectivity, and self-powering from the NMEA 2000 bus
Generates NMEA 2000 alerts from any BMV or SmartShunt Alarms
Supports multiple SmartShunts for a larger multi-battery system
VeKonvert Is Compatible with the Following Victron Products:BMV-700, BMV-702, BMV-700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge ControllersThe veKonvert will automatically detect what Victron device it is connected to and adjust the NMEA 2000 data that it outputs accordingly. Below is a list of the PGNs that the veKonvert outputs for the different Victron Devices and different modes that they can operate in: All MPPTs
PGN 127506 DC Detailed Status (DC Type set to MPPT)
PGN 127508 Battery Status (MPPT Output Voltage and Current)
PGN 130900 Proprietary Solar Controller (All solar panel data)
All SmartShunts and BMVs
PGN 127506 DC Detailed Status (DC Type set to Battery, SOC and A/h consumed)
PGN 127508 Battery Status (Output Voltage and Current)
NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.
High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 160-Degree Horizontal Field of View - 1.8mm LensIris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via our CMAC series of switchers, interfaces, and recorders.The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation and is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings.The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions.Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution.Features:
Marine Grade 316 Stainless Steel rugged corrosion-free case
Compatible with Raymarine / Axiom chart plotters running LH2 and higher
Compatible with Simrad, Lowrance & B & G
Compatible with Furuno software running TZ4.1 and above
Garmin Compatibility in conjunction with CMAC Systems
High polish finish
Built-in infra-red LED illumination (10m Range)
PoE & 12VDC connections
Extremely low power consumption
IP66 environmental protection
Specifications:
Lens (millimeter): 1.8mm
Horizontal Field of View: 160-degree HFOV
Sensor (inch): 1/4” CMOS Sensor
Resolution: Variable - 1920x1080P (2MP) max
Interface: RJ45 10/100 base t ethernet
Video Processing: H.264 Codec / dual stream
Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF
Onvif: Profile S v2.4
Bitrate: VBR / CBR 32kbps 8Mbps
Illumination: 6 x 850nm infra-red - 10-meter range
Lens/Field of View: 1.8mm wide angle option
Mirroring: Horizontal & vertical - configure via browser
Automatic Gain Control: Supported / multiple levels
Compatibility: Raymarine / Axiom (LH2 or higher), NAVICO MFD’s inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems
Operating Temperature: -30 +60-degrees C
Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket
Material: 316 Stainless Steel
Power: PoE IEEE802.3af / 12VDC <200mA max.
Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H
Environmental: IP66
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)
Four Channel Uplink Power Over Ethernet Switch - IEEE802.3af & 3at Compliant - 9-30VDC Input - 48VDC OutputThe new PoE4v2 from Iris Innovations is a four-channel plus uplink power over Ethernet switch that operates over a wide DC input voltage range of 930VDC making it perfect for powering IEEE802.3af/3at devices from battery sources such as boats and vehicles.The PoE4v2 outputs 48 VDC to your PoE device with a power budget of 60W in total and up to 30W per port, providing power to up to 4 devices at 15W each, 2 devices at 30W each, or 1 device at 30W, and further 2 devices at 15W.The unit features a passive uplink port to enable connections to other network switch equipment, routers, or modems.The PoE4v2 simplifies your installation as only a single network cable is required to connect and power your devices, reducing cost and adding convenience.Features:
Compact and robust housing
Wide input voltage range of 930VDC
Perfect for boats and vehicles
60W power budget
IEEE802.3af / 3at compliant
Up to 30W per channel
Plug and play operation - no configuration required
48VDC PoE output voltage to your devices
Provides power to devices up to a 100-meter cable length
Simplifies installations
Specifications:
Weight & Dimensions: 0.350 Kg / 115 mm x 32 mm x 95 mm
Material: Aluminium, soft anodized
PoE Ports / Standard: Ports 14 IEEE802.3af / 802.3at + 1 Uplink Port (non PoE)
Total PoE Budget: 60W across 4 PoE Ports
Maximum Cable Length: 100 Meters
Approvals / Standards CE, UKCA, FCC, IC, REACH, RoHS, WEEE / EN IEC 62368:12020+A11:2020 EN60945:2002 Section 9 & 10
Input Voltage Range: 9 30 VDC
Output Voltage: 48 VDC
Power Consumption Idle: 0.8W / Max: 2.2W / PoE Max: 106W
Environmental: IP30 - Install in a dry dust free environment. Do not expose to moisture.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)
Fusion to Garmin Marine Network Cable - Male to RJ45 - 6' (1.8M)Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system.Features:
Length - 6' (0.15 M)
Connections - RJ45
Compatible Products:
Fusion Apollo RA770
Fusion Apollo SRX400
Fusion Apollo WB670
Fusion Apollo RA670
*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Cable Length (Feet): 6
Box Dimensions: 1"H x 5"W x 6"L WT: 0.25 lbs
UPC: 753759288471
Brochure (pdf)
595 Controller for NightRunner with Joystick Features:
Miniature Thumb-Stick 2-Axis Joystick
Complete control of the NightRunner Feature Set
Intuitive Menu-Based Operation
Supports Iris Extended Pelco-D protocol
8 x Illuminated Tactile Buttons for Easy Menu Navigation
RS485 Serial Data Communications
Supports up to 64 Night Runner Cameras on a single network
Multiple Controllers Supported
Water Resistant to IP66
Stylish Compact Design
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)
Bilge High Water DetectorPart #: BHW100Used with SIM100 Switch Indicator Module to detect high bilge water.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
Exhuast Gas Temperature Probe (0°C to 900°C or 32° to 1652°F)WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
DFF1UHD+ TruEcho CHIRP™ Fishfinder with Side-Scan Black Box SounderAdvanced CHIRP Technology Meets Maximum VersatilityThe DFF1UHD+ succeeds the BBDS1 and DFF1-UHD, offering superior performance, modern connectivity, and capabilities not found in previous generations.Combining TruEcho CHIRP™ technology, CHIRP Side-Scan capability, and broad transducer compatibility, the DFF1UHD+ sets a new benchmark for high-performance fish finding. Its compact design and seamless integration with NavNet TZtouchXL make it an ideal solution for both new installations and system upgrades. Built for versatility and future expansion, the DFF1UHD+ delivers the clarity, range, and flexibility professional anglers and serious boaters demand from their marine electronics.Next Generation Fishing And Navigation Solution for NavNet TZtouchXLThe DFF1UHD+ is a powerful multi-channel network Fish Finder designed for seamless integration with NavNet TZtouchXL, the perfect addition for helms featuring the TZT22X, TZT24X, or Black Box TZTBBX. The DFF1UHD+ combines up to 1 kW of CW and CHIRP Fish Finder power with 230 kHz or 455 kHz CHIRP Side-Scan in a single compact unit, delivering enhanced performance and versatility. Color-coded, waterproof connectors and a compact design allow for a simple installation.Advanced Fishfinder Features:
Compatible with 300/600 W or 1 kW Transducer (Matching box MB1100 required for some CW transducers)
Display Range from 6 to 4,000 feet
Modes: ACCU-FISH™*, A-Scope, Manual Gain, Auto Gain (Fishing/Cruising), TruEcho CHIRP™, Bottom Discrimination (Compatible transducer required)
8-Step Picture Advance: x4, x2, x1, 1/2, 1/4, 1/8, 1/16, stop
Fish Finder Alarms: Fish School, Fish School for bottom lock
CHIRP Side-Scan Features:
CHIRP at 230 kHz or 455 kHz center frequency
Display range up to 750 feet to each side
View CHIRP Side-Scan in full screen, 1/2 screen, 1/3 screen, 1/4 screen, and 1/6 screen
Eight CHIRP Side-Scan display colors
Features:
Combines CW, TruEcho CHIRP™, and CHIRP Side-Scan into a single compact black box solution.
Features CHIRP Side-Scan capability at either 230 kHz or 455 kHz (depending on transducer), with a range of up to 750 feet.
Offers advanced modes: ACCU-FISH™*, Bottom Discrimination*, Manual and Auto Gain, and A-Scope, delivering exceptional clarity and definition *(feature compatible transducer required)
Flexible Display Layouts: Choose from full screen, split screen, and multi-pane layouts: 1/2, 1/3, 1/4, and 1/6 screen formats, with eight CHIRP Side-Scan color options.
Over 60% smaller than the DFF1-UHD and nearly 50% smaller than the BBDS1, making it ideal for installations in tight spaces.
Specifications:
Display Size: Black Box
Display Type: Black Box
Power Usage: 12-24 VDC
Range: 4,000'
Power Output: 150 W or 300 W or 600 W or 1 kW
Sonar connectors: Blue sonar connector - 12 pin, Yellow Sonar connector for Chirp Side Scan 12 pin
Frequency: CW 50-200 kHz and CHIRP 40-225 kHz and CHIRP Side-Scan 230 or 455 kHz
A Variety of Transducer Combinations:There are a variety of available transducer combinations to meet the needs of any vessel:Without Side-Scan:
Single CHIRP
Dual CHIRP
Single CW
Single Mid-CHIRP and CW
With Side-Scan:
Single CHIRP and CHIRP Side-Scan
Single CW and CHIRP Side-Scan
Brochure (pdf)