Marine Plumbing & Ventilation - Washdown / Pressure Pumps

Aqua Jet WPS 2.9 GPM - 12V NPT - 2.8 BarQuiet and pulsation free even at low speeds, the Aqua Jet five chamber diaphragm pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sounds levels in relation to water flow are placed at a premium - such as in shower and galley applications. Operates in fresh or sea water. Self priming. It is recommended to install pump with an accumulator tank. Always use a PUM Protector inlet strainer before the pump intake. 85 watt motor with PP/PPA body, EPDM valves and santoprene diaphragm. 8.02" L x 7.76" W x 4.33" H. Weight: 3.5 lbs. Capacity: 2.4 GPM/Pressure Cut-Off: 41 psi/Fuse Size: 10 Amp/Connection: 3/8" NPT/hose/1/2", 1/2" NPT/hose 3/4". Features: 5-chamber Aqua Jet WPS pumps provide a reliable "heart" for small boat and RV water pressure systems Lower noise and water pulsation 2.9 GPM Capacity

Read more less

Pressure Storage Tank - 3.2 Gallon Drawdown A pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. Specifications: Diameter: 15" Mounting: Stand 30/50 Drawdown: 3.2 gallon Thread NPT: 3/4"

Read more less

Wash Down Flexible Hose - 25'Features: Expandable X-hose flexible hose Easy to use, portable, folds up after use, easy to stow away Handles wash down pump pressure Size: 25' Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 9"W x 12"L WT: 0.7 lbs UPC: 729321218887

Read more less

Blaster II Washdown Pump - 24 VDC - 3.5 GPM - 45 PSIThe Shurflo Blaster II Washdown Pump design was created with a unique over-molded single-piece diaphragm, ensuring long life and top performance in all marine washdown applications.Features: Thermally protected and can run dry without damage Sealed switch Ignition Protected 2 each 3/4" hose barb fittings, 1 each 3/4" GHT (M) fitting Nozzle included (aftermarket models only) Specifications: Dimensions: 9" x 4.9" x 4.1" (229 x 124 x 104 mm) Voltage: 24 DC Flow Rate: 3.5 GPM (13.2 LPM) Amps (Max): 3.5 Shut-Off Pressure: 45 PSI (3.1 Bar) Specifications: Gallons Per Minute: 3.5 GPM Max PSI: 45 Volts: 12v Box Dimensions: 5"H x 6"W x 11"L WT: 6 lbs UPC: 752324012411 Quick Guide (pdf)

Read more less

Par-Max HD5 Heavy Duty Water Pressure Pump - 12V - 5 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 5 GPM Box Dimensions: 5"H x 6"W x 18"L WT: 8.4 lbs UPC: 671880841948 Brochure (pdf)

Read more less

SHURFLO Electric Faucet & Pump Combo - 12 VDC, 1.0 GPMSmooth, easy flow. Exceptional durability. Trouble-free, ceramic disc, washerless design. Versatile 360 degree spout rotation. Designed for ease-of-use with a pump or city water system.Features: Sliding Ceramic Plate ValveTwo ceramic disk plates that slide on each other. Ultra strong ceramics insure reliability and long life, as well as water flow from a trickle to a steady stream.UL Approved Stringent toxicity, performance, and life testing. Simple Installation Complete with mounting hardware. Only 1 hole necessary for mounting360° Rotation in 3 directions Rotating spout allows a variety of uses. Cold only. Hot/Cold does not rotate down.Multiple Installation PossibilitiesUse with or without an electric pump. Mounts in any position.High Operating Temperatures Up to 176°F (80° C)High Operating Pressures Up to 87 PSI (6 Bar)Rugged ABS Plastic Design Built to withstand the real worldEasy Operation "Twist-Of-The-Wrist" switch and valve operationSmooth Futuristic Design Sleek design Specifications: Volts: 12v Gallons Per Minute: 1 GPM Box Dimensions: 2"H x 7"W x 8"L WT: 1.3 lbs UPC: 752324002238

Read more less

Wash Down Pump - 12V - 3.4 GPMPremium wash down pump 12V with capacity 12,9l/min (3,4GPM). For efficient deckwash or wash down duties. Cut off pressure 5bar (70psi).Features: Easy to install with quick connect ports for 1/2″ hose  Inlet strainer 40 mesh included Specifications:Fuse Size: 15A Specifications: Volts: 12v Gallons Per Minute: 3.4 GPM Box Dimensions: 5"H x 7"W x 11"L WT: 7.3 lbs UPC: 7340176600639 Brochure (pdf)

Read more less

Par-Max 2 Water Pressure Pump - 24V - 2 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 35 Gallons Per Minute: 2 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 4.5 lbs UPC: 671880841771 Brochure (pdf)

Read more less

HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 8"W x 18"L WT: 10 lbs UPC: 671880842006 Brochure (pdf)

Read more less

1" Electro-Magnetic Clutch PumpFlow rate: Nominal 23 US Gallons/min at 1750 RPMSelf-priming from dry up to 7.8ftFeatures: Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear (this may affect performance - seek advice from your distributor). Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. APPLICATIONS MARINE:Engine cooling, Pumping bilges, Wash downs, Circulating water in bait tanks, Utility dockside pump.INDUSTRIAL:Circulating and transferring, Velocity mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc.FARMING:Pumping water for stock, Pumping water from shallow wells and cisterns.PUBLIC UTILITIES AND MUNICIPALITIES:Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations, and truck installation under hood for emergency pumping.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 23 GPM Volts: 12v Box Dimensions: 8"H x 9"W x 14"L WT: 16.15 lbs UPC: 671880007962 Owner's Manual (pdf)

Read more less

Heavy Duty RV Water Pump with Strainer - 12V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 4 GPM (15 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Mag Drive Centrifugal Pump - 21GPM - 110V ACDesigned for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.Pump Head is manufactured in chemical resistant thermo-plastics - entirely non-metallic.UL listed, ignition and thermally protected fan cooled motor.Features: 21.13 GPM open Flow 110V AC 60Hz 3/4" NPT ports for easy connection 18 foot head WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 110v Gallons Per Minute: 21 GPM Box Dimensions: 7"H x 10"W x 11"L WT: 7.7 lbs UPC: 671880624299 Quick Guide (pdf)

Read more less