Sailing - Hardware

Cam Fairlead - BlackMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Read more less

Aluminum Deck Cleat - 5"Length 5" (127 mm), Line Score 1/2" (13 mm), Fasteners (2), #12 FH (6 mm), C/C A 1-1/4" (32 mm), Weght 2 oz. (57 g)

Read more less

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail blocks etc.The high-load eye, combined with the Dyneema loop, gives you a fast, efficient, simple, and extremely strong solution for changing the direction of any line. The hard anodised aluminium eye is designed to have very good wear-resistant properties with low friction, which, combined with the high-strength Dyneema loop, gives you an exceptional low weight to very high performance and load ratio.Features: High load eye compared to a standard plain bearing block on average across the range Friction increases by only 15% Strength increased by 272% Weight reduced by 51% Data based on using a 4mm D12 SK75 Dyneema core

Read more less

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can be more reliable and effective than a stopper knot, and prevent the line from pulling through the sheave, fairlead, ferrule, or cleat.As part of overall rope management, Rope Stoppers serve to protect the eye splice and whipping twine used to terminate the line.Rope Stoppers will help the longevity and life of the line. Manufactured from Polypropylene plastic for durability and UV stability.Features: Perfect to put at the end of a piece of a line for increased grip. Prevents line from running through, jamming, or getting hung up on a variety of hardware. Helps in protecting all lines of all materials from damage. Color coded to help identify line usage.

Read more less

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with hollow stainless rivets to allow easy and tidy fitting.Specifications:Dimensions: 115mm x 28mm x 25mm (4.53" x 1.1" x 0.98")

Read more less

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides, plus stand-up blocks.A popular range of Genoa cars and sliders designed to run on 32mm (1-1/4”) T track. All are manufactured from high-quality marine-grade aluminium with our unique grey anodised finish for added protection.All cars and sliders featured on these pages have moulded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.All Genoa cars in this range are available in a heavy-duty version for larger craft or for larger load applications.Features: Grey anodized finish. Stainless steel plunger stops with positive action. Molded nylon slide inserts ensure free running. Large, easy grip plunger knobs. Heavy-duty Genoa car options. Cars and sliders are compatible with most makes of ‘T’ track. Modified slider inserts are available for obscure sizes.

Read more less

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied with a stainless steel blanking plug. Designed to be mounted flush with the deck using three fixing bolts, the sealed internal thread prevents water ingress. The design prevents trip hazards on board when not in use. The range allows for a multitude of uses, including: temporary fixing eyes, boat tie downs, deck mounted boarding ladders, stand up blocks, davit mounts, life raft holders, dive tanks & other endless uses.

Read more less

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings

Read more less

Stainless Steel Split Rings - 10mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Specifications: Weight: 3g Dimensions: 30mm x 30mm x 4mm

Read more less

Size 4 58mm Plain Bearing Pulley Cheek BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-bearing components and interior frame are from marine grade 316 stainless steel and both plain and ball-bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up 12mm (7/16″) rope. Quick Guide (pdf)

Read more less

12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.Specifications: Length (mm): 48 mm Length (in): 1-7/8 in Width (mm): 18 mm Width (in): 11/16 in Weight (g): 28 g Weight (oz): 0.99 oz Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Fasteners (mm): 6 SH mm Fasteners (in): 1/4 SH in Maximum working load (kg): 908 kg Maximum working load (lb): 2000 lb Breaking load (kg): 1816 kg Breaking load (lb): 4000 lb Height (mm): 28.2 mm Height (in): 1-1/8 in A (mm): 32 mm Center hole Ø (mm): 12 mm Center hole Ø (in): 15/32 in

Read more less

5/16 Stainless Steel Sail Snap +Features: Grade 316L stainless steel forged sail snaps Easy to install (single-handed operation) Efficient use: no jamming of the system Specifications: Materials: 316L stainless steel grade Length (mm): 110 Working load (kg): 960 Breaking load (kg): 1300 Weight (g): 244 A (mm): 24 B (mm): 15 Applications:Perfect to hoist a storm jib or a staysail

Read more less