Sailing

Series 20 Ball Bearing Block - Double - 2-Axis Shackle HeadFeatures: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Two-Way head can be fixed at 0° or 90° Applications: Dinghy control lines Dinghy vangs Cunninghams Traveller controls Materials: Stainless steel ball bearings UV Stabilized Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks Specifications:Sheave Ø:t20mm(3/4")Max. Rope Ø:t6mm(1/4")PinØ: 4mm(5/32")M.W.L.:t350kg(770lbs)B. L.:t700kg(1,540lbs)Weight:t42g(1.5oz)

Read more less

5/16 Stainless Steel Sail Snap +Features: Grade 316L stainless steel forged sail snaps Easy to install (single-handed operation) Efficient use: no jamming of the system Specifications: Materials: 316L stainless steel grade Length (mm): 110 Working load (kg): 960 Breaking load (kg): 1300 Weight (g): 244 A (mm): 24 B (mm): 15 Applications:Perfect to hoist a storm jib or a staysail

Read more less

Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective and reliable means of automatic bailing Made of stainless steel and guaranteeing years of trouble free servicing Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 6"L WT: 0.25 lbs UPC: 9316800468058

Read more less

SR-2 Jib RollerThe Forespar® SR-2 Jib Roller with fit shrouds from 3/16” thru 3/8” wire diameter. Use the proper size pair of insert liners according to the table below: 3/8” wire – use no insert 5/16” wire – use #1 inserts 9/32” wire – use #2 inserts ¼” wire – use #3 inserts 7/32” wire – use #4 inserts 3/16” wire – use #5 inserts The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain’s chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape. Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don’t have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.

Read more less

FRX25 Friction Ring - 25mm (63/64")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are hard anodized (50 microns) for a longer lifespan Applications:Mast-foot block, barber-hauler, inhauler, loop, thimble, lazy jack, running backstay, tackle, and moreSpecifications: Materials: Anodized aluminium Working load: (lb) 11020 / (kg) 5000 Weight: (lb) 0.126 / (g) 57 A: (inch) 43/64" / (mm) 17 B: (inch) 63/64" / (mm) 25 C: (inch) 63/64" / (mm) 25 D diameter: (inch) 2 23/64" / (mm) 60 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 Quick Guide (pdf)

Read more less

Folding Pad Eye - 6mm Diameter (15/64") - 2 Fixed HolesFeatures: They are 100% safe and highly resistant to corrosion Fully drop-forged product with outstanding working and breaking loads regardless of the angle of the load Modern and optimized design to suit the aesthetics of modern boats They can be folded down to minimize the risk of injuries The silicon pad eliminates moist and unpleasant vibrations Modern design Applications:Fastening applications (stay, blocks, jib tack point, lifeline, etc...)Specifications: Materials: 316L stainless steel grade Working Load: (lb) 1650 / (kg) 750 Breaking Load: (lb) 3520 / (kg) 1600 Weight: (lb) 0.123 / (g) 56 Dimensions: A: (inch) 1 37/64" / (mm) 40 B: (inch) 59/64" / (mm) 23.4 C: (inch) 19/32" / (mm) 15 d diameter: (inch) 9/32" / (mm) 7 D diameter: (inch) 15/64" / (mm) 6 E: (inch) 1 37/64" / (mm) 40 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Black Watertight U-Bolt - 8mm Diameter - 5/16" - 80mm Length - 3-5/32"Features:  Fully drop-forged product with high-quality stainless steel Outstanding working and breaking loads Complete water-tightness thanks to the resistant rubber collar (black color) Easy installation (no need to use a waterproof sealant) Delivered with bolts and counter-plate Max tightening torque: 18 nm Applications:Various fastening applications: shrouds, lifelines, blocks…Specifications:  Materials: 316L stainless steel grade Color: Black Working load: (lb) 5290 / (kg) 2400  Breaking load: (lb) 10580 / (kg) 4800  Weight: (lb) 0.271 / (g) 123  Dimensions: Length: (inch) 3 5/32" / (mm) 80  A: (inch) 1 27/64" / (mm) 36  B: (inch) 63/64" / (mm) 25  C: (inch) 1 37/64" / (mm) 40  D diameter: (inch) 5/16" / (mm) 8  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

3 Leg Dinghy SlingThe Wichard 3 Leg Dinghy Sling is made of forged stainless steel hardware, that is joined with 1-3/4" military spec. parachute harness webbing. This combination provides strong and reliable support, for an easily operated Dinghy lifting sling. Features: Type: 3 Leg & Safe Working Load of 2000 lb 1-3/4" x 8' Legs that are adjustable  Applications:The 3 Leg Dinghy Sling is intended to be used on Dinghies up to 12ft*Note: The new style of Dinghy slings are blue, not yellow

Read more less

Black Watertight U-Bolt - 10mm Diameter - 25/64" - 110mm Length - 4-21/64"Features:  Fully drop-forged product with high-quality stainless steel Outstanding working and breaking loads Complete water-tightness thanks to the resistant rubber collar (black color) Easy installation (no need to use a waterproof sealant) Delivered with bolts and counter-plate Max tightening torque: 36 nm Applications:Various fastening applications: shrouds, lifelines, blocks…Specifications:  Materials: 316L stainless steel grade Color: Black Working load: (lb) 7930 / (kg) 3600  Breaking load: (lb) 15430 / (kg) 7000  Weight: (lb) 0.525 / (g) 238 Dimensions: Length: (inch) 4 21/64" / (mm) 110   A: (inch) 1 37/64" / (mm) 40  B: (inch) 1 1/32" / (mm) 26  C: (inch) 2 9/16" / (mm) 65  D diameter: (inch) 25/64" / (mm) 10  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

12mm Eye Nut - Thread M14 x 200mmFeatures: A complete range of single-piece forged products for fastenings applications Outstanding breaking loads Available in different sizes Applications: Various fastening applications Towing application Waterskiing lines attachment Specifications: Materials: 316L stainless steel grade Breaking load: (lb) 19840 / (kg) 9000 Weight: (lb) 0.377 / (g) 171 Dimensions: A: (mm) M14 x 200 B: (inch) 1 1/16" / (mm) 27 C: (inch) 2 13/64" / (mm) 56 D: (inch) 15/32" / (mm) 12 E: (inch) 1 11/32" / (mm) 34 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Folding Pad Eye - Diameter 25/64"Features: Perfect solution for fastening applications (stay, blocks, jib tack point, lifeline, tether, etc...) Fully drop-forged product with outstanding working and breaking loads regardless of the angle of the load Modern and optimized design to suit the aesthetics of modern boats They can be folded down to minimize the risk of injuries The silicon pad eliminates noise and unpleasant vibrations Modern design Applications:For any fastening/attachment application: shroud, stay, blocks, lifeline, jib tack point, etc…)Specifications: Materials 17.4 pH stainless steel/316L stainless steel grade Working load (lb) 8990 Breaking load (lb) 19840 Weight (lb) 0.783 A (inch) 2 61/64" B (inch) 1 49/64" C (inch) 63/64" D (inch) 3 5/32" d diameter (inch) 25/64" D diameter (inch) 25/64" E (inch) 2 43/64" F (inch) 1 49/64"

Read more less

Releasable Elastic Tether with 2 HooksFeatures: OSR tether with overload indicator (following OSR - WORLD SAILING recommendations) 1 fluorescent double action safety hook and 1 quick opening snap shackle Elastic line from 1 to 2 m Overload indicator Applications: Safety onboard Compliant with OSR specifications (ISAF) Specifications: Materials Double safety snap hook in 316L stainless steel grade/Polyamide webbing Weight (lb) 0.767

Read more less