Protective Screw Cover for NMEA2000 Male Micro Connectors - 10-PackScrew-cap covers for NMEA 2000 Micro connectors.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Connection Gender: Male
Data Interface: NMEA 2000
Box Dimensions: 0"H x 5"W x 7"L WT: 0.05 lbs
UPC: 5060998710652
Rear Panel Mount NMEA2000 Wired Micro 5-Pin - FemalePanel-mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead/panel.The female panel mount wired connector can easily replace any of the existing ‘drop’ glands on the Actisense QNB-1 to create a quick pluggable NMEA 2000 connection option.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications:Electrical
Rated Current - 4A
Rated Voltage - 60VDC
Mechanical
Contacts - Brass, gold-plated
Contact Carrier - Nylon & GF
Contact Polarization - Standard M12-"A"-Polarization
Mating Thread - M12
Housing - Brass, nickel-plated
Mounting Thread - PG9
Mounting Nut - Brass, nickel plated - PG9
Mounting Hole Diameter - 15.3mm
Wires - 18 AWG (stripped and tinned)
Wire Jacket - PVC
Weight - 20g
Approvals and Certifications
Protection - IP67 (when mated)
Operating Temperature - -25°C to +90°C
Connector Specification - Meets IEC61076-2-101
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Connection Gender: Female
Data Interface: NMEA 2000
Box Dimensions: 1"H x 5"W x 7"L WT: 0.05 lbs
UPC: 5060998710157
Owner's Manual (pdf)Brochure (pdf)
Rear Panel Mount NMEA2000 Wired Micro 5-Pin - MalePanel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead/panel.The female panel mount wired connector can easily replace any of the existing ‘drop’ glands on the Actisense QNB-1 to create a quick pluggable NMEA 2000 connection option.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications:Electrical
Rated Current - 4A
Rated Voltage - 60VDC
Mechanical
Contacts - Brass, gold-plated
Contact Carrier - Nylon & GF
Contact Polarization - Standard M12-"A"-Polarization
Mating Thread - M12
Housing - Brass, nickel-plated
Mounting Thread - PG9
Mounting Nut - Brass, nickel plated - PG9
Mounting Hole Diameter - 15.3mm
Wires - 18 AWG (stripped and tinned)
Wire Jacket - PVC
Weight - 20g
Approvals and Certifications
Protection - IP67 (when mated)
Operating Temperature - -25°C to +90°C
Connector Specification - Meets IEC61076-2-101
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Connection Gender: Male
Data Interface: NMEA 2000
Box Dimensions: 1"H x 4"W x 6"L WT: 0.05 lbs
UPC: 5060998710164
Owner's Manual (pdf)Brochure (pdf)
RJ45 Waterproof Ethernet Connector for NDC-5RJ45 Field-Fit Ethernet connector.Allows for complete customization of Ethernet network cabling lengths, reducing cost, waste, and the overall weight of your boat.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
SeaTalkNG to NMEA2000 Adapter CableAdapter cable to convert SeaTalkNG data to NMEA2000.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Connection Gender: Female-Female
Data Interface: NMEA 2000
Box Dimensions: 1"H x 6"W x 7"L WT: 0.2 lbs
UPC: 5060998710621
Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators & Power FeedInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.The equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space.Once the attached 3 meter cable is connected to the boats power supply, an NMEA 2000 network for up to eight devices is ready to use, taking ‘plug & play’ to the next level.Features:
Self-contained NMEA 2000 Network
Integrated Termination Resistors
8x NMEA 2000 drops
Ruggedized, flame retardant over-molded housing
Metal coupling nuts
Integrated EMI Shield
Orange, UL Rated, 3-meter power cable
Color coded wires, stripped and tinned
Low cost, quick to install, and provides an easy way to connect multiple NMEA 2000 devices
Simple installation, fewer components, more reliable, lower cost
Accommodates the vast majority of compact NMEA 2000 networks
Suitable for wet and harsh conditions- highly desirable in marine environments
Reliable, long lasting connections
Less likely to be susceptible to interference
UL rated cable provide peace of mind. Color easily differentiates the power cable form drop cables
Quick installation, no special tools required
Technical Specifications:Electrical
Rated Current - 3A
Rated Voltage - 60 V (AC/DC)
Internal Termination Resistors - 2 x 120Ω 250mW
Mechanical
Female Contact - Phosphor bronze, gold plated
Contact Carrier - PA66 (30% Glass filled), black
Contact Polarization - Standard M12 – “A” – polarization
Mating Thread - M12
Screw Cap - Brass, nickel plated
O-Ring Seal - Rubber, black
Housing - TPU (Halogen Free) over Epoxy filled PBT housing
Flammability rating - UL94 V-0
Internal Housing Shield - Copper foil
Cable Jacket Material - 0.8mm Nom. PVC, orange
Cable Outer Diameter - 6.8mm
Cable Length - 3m
Wire Length - 150mm (10mm stripped and tinned)
Wire Jacket - PVC, Red & Black
Wires - 16 AWG (stripped and tinned)
Drain - 18 AWG (34 strand tinned copper)
Cable Shield - Al-mylar
Weight - 410g
Approvals and Certifications
Protection - IP67 (when mated)
Operating Temperature - -25°C to +70°C
Storage Temperature - -40°C to +85°C
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Data Interface: NMEA 2000
Cable Length (Meters): 3m
Box Dimensions: 1"H x 6"W x 8"L WT: 0.9 lbs
UPC: 5060998710188
Owner's Manual (pdf)Brochure (pdf)
Spare Shielded Cable for Connecting USB-2 to PCUSB cable accessory for use with the Actisense USG-2.*Note: The USG-2 ships with this cable included in the box, but it is also available as an accessory in case a replacement is needed.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Type: Cables
UPC: 5060998710775
Universal Strain Relief BracketThis strong stainless steel strain relief bracket ensures neat installation and tidy cables by securing any loose cables directly to the bulkhead.Perfect for the installation of the Actisense PRO-Range products; however, its smart design is ideal for any strain relief application.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Type: Misc
UPC: 5060998710607
USB to Serial Adapter for PRO Range & EMU-1 ProductsSerial to USB cable assembly.*Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA 0183 data to a PC from another manufacturer's device, the Actisense USG-2 is recommended.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 And RS232The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network.The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.It provides a far safer connection when compared to standard USB to serial converters.Electrical isolation is provided by the ISO-Drive™ output and OPTO-isolated input making installation simple and free from ground loops.The input uses the Actisense OPTO-isolation circuitry to protect any connected equipment from the most common system faults. The input can receive very low-level signals that are often too small to be received by a PC serial port.The USG-2 is the safest way to connect a boat’s data network to an on-board PC.Features:
NMEA 0183, RS422 & RS232 compatible
ISO-Drive™ technology
Pluggable screwless connector with locking latch & strain relief
Encapsulated electronics
High retention USB socket
Diagnostic & power LEDs
Baud rates from 300 to 230400 bps
Bulkhead mount, with optional DIN rail mount kit
Pluggable screwless connector
Inputs & outputs protected against over voltage, ESD & short circuits
Simple installation
Protects PC from damage
Eliminates ground loops
Technical Specifications:Power Supply (USB)
Power Source - Bus powered
Maximum Bus Current - 50mA
NMEA 0183 Port – Talker & Listener
Number of Listener/Input Ports - One isolated NMEA 0183 Listener
Number of Talker/Output ports - One isolated NMEA 0183 Talker
Compatibility - Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible
Galvanic Isolation - NMEA 0183 Talker and Listener Isolation
Speed/ Baud Rate - 4800 to 230400 bps / baud
Connectivity - Pluggable screwless connector with locking latch and integrated push-button. Utilizes cage clamp for 12 to 24 AWG wires (both solid and stranded)
Talker output voltage drive - >2.0V (differential) into 100Ω
Talker output current drive - 20mA max.
Talker output protection - Short circuit and ESD
Listener input voltage tolerance - -15V to +15V continuous
Listener input protection - Current limited, overdrive protection to 40V DC and ESD protection
USB Port
Compatibility - USB 1.1, 2.0 and 3.0
Speed/ Baud Rate - 300 to 230400 Baud
Connectivity - High retention type-B receptacle (supplied cable includes a custom USB Type-B sealing plug)
Withdrawal Force - 1.5Kg
Drivers (Latest OS) - Windows XP, Vista, 7, 8, 10,11 & MAC OS X supplied on CD & Actisense website
Mechanical
Materials - Housing – ABS (PA-765), flame retardant to UL94 V-0, PCB encapsulant – polyurethane, flame retardant to UL94 V-0, Pluggable screwless connector – PPA-GF with CrNi spring and tin plated Ecu contacts
Mounting - Bulkhead mount (s/s self tapping screws included) or optional DIN rail mount kit available
Weight - Main body 65g, USB cable 70g
USB cable length - 2.0m shielded USB Type-A to Type-B cable including custom USB Type-B sealing plug
Approval & Certifications
EMC - EN 60945 (sections 9 & 10)
Environmental protection - IP67 (Encapsulated electronics)
Operating temperature - -25°C to +70°C
Storage temperature - -40°C to +85°C
Relative Humidity (RH) - 0 to 93% RH
Guarantee - 3 years (5 Years if registered)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Data Interface: NMEA 0183
Box Dimensions: 2"H x 6"W x 7"L WT: 0.4 lbs
UPC: 5060998710485
Owner's Manual (pdf)Brochure (pdf)
Multi-WAN 7 Source Gigabit Router (Rackmountable) GB Ethernet 110/220VAC PowerAigean’s Multi-WAN routers enable networks to switch between multiple internet sources without adversely affecting the onboard local network. Coupled with advanced features such as failover and smart switching, a vessel’s connection to the internet is more robust, secure, and faster than with a single-source configuration.Most modern vessels are equipped with multiple means of connecting to the internet, via ship-to-shore Wi-Fi, cellular, and satellite providers. Aigean’s Multi-WAN routers couple these sources together, creating a seamless experience, ensuring you are always connected.Aigean’s MFR models are extremely easy to use and get started with. Forget tinkering with networking settings to get your system online, no networking knowledge is required.Features:
Program alerts and limits on incoming sources to prevent airtime overages
Easily switch between mulitple internet sources
Simple failover capability to ensure the nework is always online
Full Gigabit transfer speeds on all ports
Intel x86 hardware for maximum performance and longevity
Desk or Rack Mount capable
1 year warranty from the date of purchase for parts and labor.
Specifications:
Speed - Max: 2.9 GHz
Wireless: Yes
Box Dimensions: 6"H x 14"W x 21"L WT: 11 lbs
Quick Guide (pdf)Brochure (pdf)
10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a new line of in-line splices that can be used to connect CHIRP transducers to the correct connector for a given application. These splices are available in two models, one for wires with up to 6 conductors and one for wires with up to 10 conductors. Both models have waterproof gland fittings rated to IP67. A 1.3mm hex-head wrench is included. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Type: Misc
Box Dimensions: 1"H x 1"W x 5"L WT: 0.2 lbs