Hunting & Fishing - Rod Holders

10.5" 0-Degree Swivel Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench

Read more less

Narrow Gunnel Flush Mount Rod Holder - Black These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Black Length (Inches): 10" Mounting Style: Flush Box Dimensions: 3"H x 5"W x 12"L WT: 0.25 lbs UPC: 035514326674

Read more less

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 14"L WT: 2.15 lbs UPC: 768296005528

Read more less

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.  The Rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Cast Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Silver Length (Inches): 10.5" Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.05 lbs UPC: 768296011253

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.6 lbs UPC: 768296009755

Read more less

Weld On Aluminum Flared Rod Holder with Blade 10"Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9" Swivel Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vinyl insert included to protect your rod

Read more less

Screwless Flush Mount Rod Holder - 30 Degree - Black Liner - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter 2-1/8” Outer diameter Fits 2-3/16” hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole No logo on the cap for a sleek, low profile The liner runs the full length of the tube Each rod holder includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 30 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003772

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 30 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003710

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 15 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 8858541005686 Brochure (pdf)

Read more less